25mm Plastic Random Packing Mesh Ring

Min.Order: 1
Product origin: Pingxiang, Jiangxi, China
Infringement complaint: complaintComplaint
US$ 180 ~ 300

Description
 

Product Description

Plastic mesh ring packing

Products introduction:
Plastic mesh ring packing is a kind of mesh ring with the same outer diameter and height. This plastic mesh ring packing has the characteristics of simple structure, convenient manufacturing, low pressure, large flux, high efficiency, high elasticity, and good liquid redistribution performance in the packing layer.
Plastic mesh ring filler materials include polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF).
Specification of plastic mesh ring filler: 16mm/25mm/38mm/50mm/76mm
Main characteristics of plastic mesh ring packing:
1. The large specific surface area makes the contact efficiency of gas & liquid higher.
2. High void ratio and low resistance to gas & liquid.

Technical Data Sheet

Product NamePlastic Mesh Ring
Material PP,PE,PVC,CPVC,RPP, PVDF and etc.
Life Span>3 years
Diameter
(mm/Inch)
25mm
Feature            1.Low aspect ratio increases capacity and reduces pressure drop.  The preferred vertical orientation of the packing axes allows free gas flow through the packed bed.
2.Lower pressure drop than Pall rings and saddles.
Advantage   Open structure and preferred vertical orientation inhibits fouling by allowing solids to be more easily flushed through the bed by the liquid.Low liquid hold-up minimizes column inventory and liquid residence time.
Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
ApplicationThese various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°.

 

Detailed Photos

Packaging & Shipping



 
Scroll to Top