Complaint
--Energy saving and high efficiency: integrated magnetic suspension bearing, high speed permanent magnet synchronous motor, high efficiency flow parts, special control system and a series of advanced technologies, high efficiency and energy saving of the whole machine.Compared with traditional Roots blower, the efficiency is increased by 30%~40%.Taking 160kW maglev blower as an example, each one can save more than 500,000 degrees of electricity per year compared with the traditional Roots blower, and the cost can be recovered in about 1 to 2 years.
--Low noise and vibration: Thanks to maglev bearing technology, there is no mechanical contact and friction between rotating parts and stationary parts in the fan. The vibration of the fan operation is very small, and the noise does not exceed 80 dB.
--Small size, light weight: The whole machine integrated design, internal integrated fluid components, motor, frequency converter and other components, compact structure, light weight.
--Intelligent operation and maintenance: The use of advanced control system, a variety of control modes can be selected. The operating platform can be monitored in real time without special person on site duty. Fully enclosed air cooling and water cooling systems are used to dissipate heat from the motor to ensure stable and efficient operation of the fan. Modular design, convenient maintenance.
--Very Low maintenance cost: Using magnetic bearing technology, completely frictionless. No gear box, lubrication system and other parts in the system, no mechanical maintenance, reduce the chance of damage, service life can reach more than 20 years. Daily maintenance only need to replace the air filter, save lubricating oil, cleaning costs, convenient and fast.
| MODEL | Outlet Pressure | 25kpa | 40kpa | 60kpa | 70kpa | 80kpa | 100kpa | 120kpa | 130kpa | 140kpa |
| Power(kW) | FLOW(m³/min) | |||||||||
| MSC-15 | 15 | 33 | 19 | 13 | - | - | - | - | - | - |
| MSC-18 | 18 | 40 | 23 | 15 | - | - | - | - | - | - |
| MSC-22 | 22 | 48 | 26 | 20 | - | - | - | - | - | - |
| MSC-30 | 30 | 65 | 36 | 26 | - | - | - | - | - | - |
| MSC-37 | 37 | 75 | 46 | 33 | 28 | - | - | - | - | - |
| MSC-45 | 45 | - | 52 | 43 | 35 | 31 | - | - | - | - |
| MSC-55 | 55 | - | 63 | 53 | 43 | 38 | - | - | - | - |
| MSC-75 | 75 | - | 100 | 72 | 60 | 52 | 40 | - | Design impellers according to operating conditions, pressure and flow requirements. | |
| MSC-90 | 90 | - | 115 | 83 | 72 | 63 | 51 | - | ||
| MSC-110 | 110 | - | 140 | 101 | 86 | 77 | 62 | - | ||
| MSC-132 | 132 | - | 177 | 124 | 104 | 93 | 79 | - | ||
| MSC-160 | 160 | - | 215 | 145 | 126 | 113 | 96 | 80 | ||
| MSC-185 | 185 | - | 240 | 168 | 145 | 134 | 111 | 93 | ||
| MSC-200 | 200 | - | 260 | 180 | 157 | 140 | 120 | 100 | ||
| MSC-260 | 260 | - | 330 | 233 | 205 | 183 | 152 | 125 | ||
| MSC-315 | 315 | - | 430 | 285 | 248 | 222 | 195 | 160 | ||
| Standard conditions:one atmospheric pressure 20ºC,relative humidity 65%,density 1.2kg/m³. | ||||||||||
| Performance comparison | Roots blower | Multistage centrifugal air blower | Single stage centrifugal blower | Air suspension blower | Imported maglev blower | MSC series maglev blower | |
| Bearing | Bearing | Ball bearing | Ball bearing | Tilting-pad bearing | Air foil bearing | Imported magnetic bearing, mature technology, high stability | First magnetic bearing developed independently in China, mature technology, high stability |
| Technology source | Made in China | Made in China | Import/domestic | Republic of Korea | Europe | Dalian Polytechnic University | |
| Service life | 1-2 years | 2-3 years | 3-5 years | 3-5 years | Semi-permanent | Semi-permanent | |
| Mechanical loss | 2% energy consumption of bearing | 2% energy consumption of bearing | Above 3% energy consumption of sliding friction | Dry friction at low speed, high energy consumption | Electromagnetic induction, low energy consumption of bearing | Electromagnetic induction, low energy consumption of bearing | |
| Impeller | Type | Casting 2 or 3 blades | Welding steel or casting aluminum | Aluminum alloy three-dimensional flow impeller | Aluminum alloy three-dimensional flow impeller | Aluminum alloy three-dimensional flow impeller | Aluminum alloy three-dimensional flow impeller |
| Service life | 5-8 years | 10 years | 15 years | 20 years | 20 years | 20 years | |
| Aerodynamic efficiency | Low | Low | Medium | High | High | High | |
| High-speed motor | Motor type | Low-speed asynchronous motor | Low-speed asynchronous motor | Asynchronous ac motor | High-speed permanent magnet motor | Purchased high-speed permanent magnet motor | High-speed permanent magnet motor independently developed |
| Transmission type | Belt or coupler | Coupler | Coupler | Direct driving | Direct driving | Direct driving | |
| Motor efficiency | 86% | 87% | 94% | 95% | 97% | Above 97% | |
| Speed control | unavailable | unavailable | unavailable | Precise control of speed | Precise control of speed | Precise control of speed | |
| Speed control method | There is no speed control system. When motor power and rotation speed are fixed, the air volume is fixed | No speed control system unless the variable frequency motor is replaced and the variable frequency converter is added | Guide vane adjustment, mechanical loss | Intelligent DC speed control system changes the speed of the shaft | Intelligent DC speed control system changes the speed of the shaft | Intelligent DC speed control system changes the speed of the shaft | |
| Working range | Very small | Very small, it can bebroadenedby adding a frequency converter | Small range of adjustment of air flow and pressure | Wide range of adjustment of air flow and pressure | Wide range of adjustment of air flow and pressure | Wide range of adjustment of air flow and pressure | |
| Installation | Lifting | Need | Need | Need | No need | No need | No need |
| Foundation | Need | Need | Need | No need | No need | No need | |
| Maintenance | Lubricant | Check every shift, add regularly, medium cost | Check every shift, add regularly, medium cost | Check every shift, add regularly, high cost | No need | No need | No need |
| Quick-wear part | Bearing, gear | Bearing, sealing | Bearing, gear, lubricant pump | Bearing, filter | Air filter | Air filter | |
| Cost | Low | Medium | High | High, no maintenance in China | Low, poor service timeliness | Low, good service timeliness | |
| Operation | Operation cost | Very high | High | Medium | Low | Very low | Very low |
| Investment cost | Very low | Medium | High | High | High | High | |
| Overall efficiency | 49% | 61% | 68% | 73% | 77% | 77% | |
| Overall price | Low | Medium | High (imported blower) | Medium | Very high, 1.3~1.5 times of the domestic | Medium | |
| After-sale maintenance | Short cycle, low cost and high failure rate | Short cycle and high cost | Long maintenance period and high cost | Long maintenance period and high cost | Long maintenance period and high cost | Timely maintenance, independent core components, short maintenance cycle and low cost | |
