200W High Power Amplifier /RF Module/ Signal Amplifier 5600-6000MHz with Cabinet

Min.Order: 1

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 8888 ~ 15888

Description

PTC-HPA200W is a Solid State High Power Amplifier, we customized all Amplifiers as per each client's request, this model with Ultra-wide bandwidth and high power output for option. This model designed with 19'Standard Rack & 6U Height.

ELECTRICAL SPECIFICATIONS: 50, 25°C

Parameter		Specification			Notes
Operating Frequency Range		5700- 5800 MHz
Power Output @ Saturation		300 Watt Typ			CW
Power Output @ P1dB		200 Watt Min
Power Gain			54 dB Min		Pin=0dBm for normal operation
Power Gain Flatness		1.5-2 dB p-p Max			Constant input power
Pulse Characteristics	Width		Duty	PRF
Pulse Characteristics	100 nS
	100 nS
Input Return Loss			-10 dB Max		Relative to 50 Ohm
2-Tone Intermodulation (IMD)			-30 dBc Typ		44dBm/Tone, = 1MHz
Noise Figure			<20 dB
Harmonics		<-25 dBc Typ			At rated output power
Spurious		-60 dBc Max			Non-harmonics
Operating Voltage		100V-AC
Power Consumption		1500 Watt Max			At rated Pout
Input Power Protection		+20 dBm Max			<10 Sec without damage
Load VSWR Protection			5 : 1 Max		<1 minute at rated Pout
ENVIRONMENTAL CHARACTERISTICS
Parameter		Specification			Notes
Operating Ambient Temperature			-20 to +55°C
Storage Temperature		-40 to +85 °C
Relative Humidity			5 to 95 %		Non-condensing
MECHANICAL SPECIFICATIONS
Parameter		Specification			Notes
Dimensions W x H x D		620×480×530mm			5U - Excluding handles
Weight			25 Kg
RF Connectors In / Out		Type-N Female			Front or rear panel
AC Power / Interface	IEC 60320-C14 / 9-Pin D-Sub				Or equivalent
Cooling		Built in Fan Cooling			Variable speed
OPTIONAL: Digital Monitor & Control:	Ethernet RJ-45 TCP/IP, RS422/485, USB				Optional
FWD, REV, VSWR, GAIN, ALC, V & I, TEMP	Optional GPIB Interface				Remote Bluetooth application

Class A/AB linear GaN design
Rack mounted system
Instantaneous wide bandwidth
Suitable for broadband EMI/RFI, Lab, Comm., and EW applications
Suitable for pulse and all single channel modulation standards
Built-in protection circuits
High reliability and ruggedness for mobile applications
System control supports Ethernet Software remote control

Touchscreen

1. PA:current RF Output Power display;
2. ATT:Set and display the current attenuation value
(0-30dB range);
3. VSW:Display the current output standing wave
parameters of the module;
4. VSWR:Standing wave status;
5. Tmp:System temperature status;
6. OP:RF Output Power Status;
7. RF Output Control Switch:Press the switch to turn on the switch and the switch changed as blue color, changed to white color after pressed again to turn off the switch;
8. Temp:display the current system temperature;