Handle Cleaning 20m3/Hour UV Water Systems Provides Clean and Safe Drinking Water

What is an Ultraviolet (UV) Sterilizer?

UV Water Sterilization technology seeks to use the same process as nature to provide water that is completely safe. In nature, the Sun produces UV rays which have a germicidal effect on disease causing pathogens in water. When these contaminants are exposed to UV light, they are rendered harmless and the output water is considered disinfected. 

Our ultra violet water purification systems kills 98% of all bacterial contaminants, and provides clean, safe drinking water, far exceeding Health Department standards for portable water.

UV water sterilizers use several stages of filter to remove sediments down to 5 microns removing particulates. A second stage Carbon filter removes odors and particles down to 0.5 microns. The UV light stage saturates the water with high dose UV light at wavelengths that kill pathogens. Together the UV water sterilizer system is excellent for quality of construction, and effectiveness in treating your water to remove unwanted and unsafe elements. The UV water treatment system is ideal for homes, businesses, and remote sites.


How does it work?
UV sanitation systems eliminate chlorine-resistant microorganisms, which are common causes of pool closures. These systems reproduce UV radiation inside light chambers via powerful lamps, which emit germicidal UV-C light that is used to disinfect pool and spa water. Facilities equipped with these systems consume fewer chemicals and allow sterilizers to be more effective. How much more effective depends on the water's hardness, pH and other water chemistry factors. UV-C causes permanent damage to a number of microorganisms almost instantly as the water circulates through the light chamber. By disrupting the microorganism's DNA, protozoans, viruses and bacteria are unable to replicate and remain inert. This light, however, works only on water that flows through the chamber. Water in dead zones isn't treated by the light and the light does not act as a residual, thus the need for the presence of a halogen. The effects of UV-C are immediate and do not alter the water's composition. 




Factors Affecting UV Treatment:
Because UV does not leave any measurable residue in the water, it is recommended that the UV sterilizer be installed as the final step of treatment and located as close as possible to the final distribution system. Once the quality of the water source has been determined, you will need to look at things that will inhibit the UV from functioning properly (i.e. manganese, TDE, turbidity and suspended solids).

Iron and Manganese will cause staining on the quartz sleeve and prevent UV energy from transmitting into the water levels as low as 0.03 ppm of iron and 0.05 ppm of manganese. Proper pre-treatment is required to eliminates this staining problem.
Total Dissolved Solids (TDS) should not exceed approximately 500ppm. There are many factors that make up this equation, such as the particular make up of the dissolved solids and how fast they absorb the available UV energy. Calcium and magnesium, in high amounts, has a tendency to build up on the quartz sleeve, again impeding the UV energy from penetrating the water.
Turbidity: is the inability of light to travel through water. Turbidity makes water cloudy and aesthetically unpleasant. In the case of UV, light levels over 1NTU can shield microorganisms from UV energy, making the process ineffective.
Suspended Solids: need to be reduced to a maximum of 5 microns in size. Larger solids have the potential of harboring or encompassing the micro organisms and preventing the necessary UV exposure.
Pre-filtering is a must on all UV applications to effectively estroy micro organisms to a 98.9% kill rate.


Application
1.Food processing industry, including juices, milk, drinks, beer, practical oil  and canned food.
2.Electronic industry.
3.Hospitals, various laboratory and high levels of pathogenic body water disinfection.
4.Households building, residential, office buildings, hotels, restaurants, water factories.
5.Purification and disinfection of shellfish, fish cleaning and disinfection
6.outdoors camp, field water supply system
7.Urban wastewater disinfection.
8.Swimming pool, other recreational water disinfection 
9.Thermal power, nuclear power plant  industrial, central air conditioning system cooling water.
10.Biological, chemical and pharmaceutical, cosmetics for the production of cooling water.
11.Sea water, fresh water breeding, aquaculture  water
12.Agricultural water disinfection


 
Limitation of Use
The UV water disinfection system NOT intended for the treatment of water that has an obvious contamination or intentional source, such as raw sewage, nor is the unit intended to convert wastewater to microbiologically safe drinking water.
 
Water Quality (in)
Water quality plays a major role in the transmission of germicidal UV rays. It is recommended that the water does not exceed following maximum concentration levels
 
Effectively treating water with higher concentration levels than listed above can be accomplished, but may require added measures to improve water quality to treatable levels. If, for any reason, it is believed the UV transmission is not satisfactory, contact the factory.
UV wavelength (nm)
 
               DOSAGE is the product of intensity & time
dosage=intensity*time=micro watt/cm²*time=microwatt-seconds per square centimeter
                            (μW-s/cm²)
             Note:1000μW-s/cm²=1mj/cm²(milli-joule/cm²)

Technical Parameters

model	capacity	Power	inlet-outlet	reactor	panel	Anchor	G weight
	m³/hour	watt	mm	L×W×H	cm	screw	Kg
YLCn-005	0.3	16	1/2″	30×6×11	without	without	5
YLCn-008	1	25	1/2″	47×6.3×11	without	without	10
YLCn-050	2	40	1″	100×9×20	Φ8.9×25 (d×L)	69×4×Φ1	25
YLCn-150	6	80	1+1/4″	100×11×23		69×4×Φ1	30
YLCn-200	8	120	1+1/2″	100×15.9×30	Φ8.9×45 (d×L)	69×7×Φ1	35
YLCn-300	12	160	2″	100×15.9×32		69×7×Φ1	40
YLC-050	2	40	DN25/1″	100×8.9×30	25×30×12 (W×H×D)	60×4×Φ1	45
YLC-150	6	80	DN32/11/4″	100×10.8×30		60×4×Φ1	50
YLC-200	8	120	DN40/11/2″	100×15.9×40		60×7×Φ1	60
YLC-300	12	160	DN50/2″	100×15.9×40		60×7×Φ1	70
YLC-360	15	200	DN65/21/2″	100×15.9×40		60×7×Φ1	120
YLC-500	20	240	DN65/21/2″	100×21.9×50		60×11×Φ1.2	130
YLC-600	25	280	DN80/3″	100×21.9×50		60×11×Φ1.2	140
YLC-700	30	320	DN100/4″	100×21.9×50		60×11×Φ1.2	150
YLC-1000	40	360	DN100/4″	100×21.9×50		60×11×Φ1.2	160
YLC-1200	50	400	DN125/5″	100×21.9×50		60×11×Φ1.2	180
YLC-1500	60	420	DN150/6″	170×27.3×57		120×16×Φ1.4	210
YLC-2000	80	560	DN150/6″	170×27.3×57		120×16×Φ1.4	220
YLC-2500	100	700	DN150/6″	170×27.3×57	60×128×30 (W×H×D)	120×16×Φ1.4	275
YLC-3000	125	840	DN150/6″	170×27.3×57		120×16×Φ1.4	300
YLC-4000	150	1120	DN200/8″	173×32.5×65		120×20×Φ1.6	325
YLC-5000	200	1400	DN200/8″	173×37.7×72		120×22×Φ1.6	350
YLC-7000	300	2100	DN250/10″	175×42.6×80		120×24×Φ2.0	400
YLC-10K	400	2520	DN250/10″	176×52.9×95	60×150×40 (W×H×D)	120×22×Φ2.2	475
YLC-15K	600	3080	DN300/12″	176×78×110		120×32×Φ2.4	600
YLC-20K	800	3920	DN350/14″	Designated	Designated	Designated	Designated
YLC-25K	1000	4760	DN350/14″	Designated	Designated	Designated	Designated

 
Facts you should know 
Chloramines (residual chlorine)  is the smell you get from chlorine
Chloramines is the cause of eye and skin irritation  
Chloramines is the cause of composite building structure corrosion.
No microbe can immunize it's self against UV rays even those pathogens that cannot be killed by chlorination.
The adverse impact of pool chemicals, especially to children, is 5 times greater than passive smoking Product and installation costs of Ultraviolet water sterilisation reactors will depending on pool size and site location.