Complaint
China KYA Pneumatic Framing nailer
SRN9034 34 Degree Nails Framing Nailer has a tool free depth adjust and easy-load magazine. It's great for framing, sheathing, remodeling and general outdoor uses.
Tool-free depth of drive adjustment prevents over-driving.
ool-free adjustable exhaust.
Drives 34 degree paper tape offset round head and clipped head nails from 2 in. to 3-1/4 in. L and 0.113 in. to 0.131in. Dia.
Designed to prevent slippage during angled nailing.
Rubber over-molded handle, trigger for enhanced comfort and grip.
Light weight and well balanced for easy operating.
| Model: | SRN9034 34 Degree Nails Framing Nailer |
| Air Tool Type: | Air Nailer |
| Tool Diamensions: | 460mm x 108mm x 360mm |
| Net Tool Weight: | 3.90kgs(8.60 lbs) |
| Body Material: | Aliminum Body |
| Operate Pressure: | 70-120psi (5-8.3bar) |
| Load Capacity: | 86-94 nails |
| Nails Type: | 34 degree paper tape collated framing nails |
| Nails Head Diameter: | 0.276"(7.0mm)-0.283"(7.2mm) |
| Nails Shank Diameter: | 0.113"(2.87mm)-0.131"(3.33mm) |
| Nails Length: | 2"(50mm)-3-1/4"(83mm) |
| Nails Shank Type: | Screw,Smooth,Ring |
| 34 Degree Paper Collated Framing Nails |
| Nails Head Diameter:0.276"(7.0mm)-0.283"(7.2mm) |
| Nails Shank Diameter:0.113"(2.87mm)-0.131"(3.33mm) |
| Nails Length:2"(50mm)-3-1/4"(83mm) |
| Nails Shank Type:Screw,Smooth,Ring |
Light weight and well balanced for easy operating.
Superior power with hardened one piece piston for professional application.
Tool free depth of drive adjustment for flush or countersunk drive into varying material.
Hardened claw tip,reduces wear and limits slippage when driving at a stand angle.
Single safety with comfortable rubber grip.
Professional nailer for heavy duty work with great powerful.
Floor and wall framing.
Window build up.
Wall sheathing.
Mobile home and housing construction.
Siding and bridging.
| No. | Symptom | Problems | Solutions | |
| 1 | Air Leak | Air leak in the cylinder cap when tools don't work | 1.Loose head valve piston seal or o-rings . | Check and replace the head valve piston set |
| 2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap | Check and replace o-ring or cylinder cap gasket under the cylinder cap | |||
| Air leak in Trigger area when tools don't work | 1.Damaged o-ring in trigger valve | Check and replace o-ring | ||
| 2.Damaged o-ring in trigger valve stem | Check and replace o-ring | |||
| 3.Dirt in the trigger valve | Check and clean the trigger valve | |||
| Air leak in cylinder cap when tools are working | 1.Damaged head valve piston o-rings | Check and replace o-rings | ||
| 2.Damaged seal under cylinder cap | Check and replace seal | |||
| Air leak in nose when tools are working | 1.Worn or damaged bumper | Check and replace bumper | ||
| 2.Loose driver(piston unit) thread | Check and replace driver(piston unit) | |||
| Air leak in Trigger area when tools are working | 1.Worn or damaged trigger valve head | Check and replace trigger valve head | ||
| 2.Damaged head valve piston o-rings | Check and replace head valve piston o-rings | |||
| 2 | Failed to get driver(piston unit) back to the correct position completely. | 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. | Straighten the driver(piston unit) or verify driver guide(nose) and magazine | |
| 2.Worn or damaged nozzle | Check and replace nozzle | |||
| 3.The space between piston o-ring and cylinder is too tight. | Check if the cylinder is adequate lubrication or replace the o-ring on the piston. | |||
| 3 | Work weakly and sluggishly | 1. Worn or damaged piston o-ring | Check and replace piston o-ring | |
| 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings | Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings | |||
| 3.Dirt in the nozzle | Check and clean the nozzle | |||
| 4 | Tool jams frequently | 1.Damaged or Worn driver (piston unit) | Check and replace driver (piston unit) | |
| 2.Damaged or Worn driver guide (nose) | Check and replace driver guide (nose) | |||
| 3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big | Check and replace driver guide cover | |||
| 5 | Nail can not be shot | 1. Driver (piston unit) can't return to the correct position. | Refer to no. 1 Symptom | |
| 2.Driver guide(nose) can not match magazine well | Check and correct the position between driver guide(nose) and magazine | |||
| 3.Worn or damaged nail pusher compression spring | Check and replace nail pusher compression spring | |||
