China Supplier 0.3 Micron 99.99% H13 14 HEPA Air Filter 24 X 48 Portable with Aluminum or Galvanized Frame /HEPA Filter for FFU

Mini-pleated HEPA Filter

Features:
The mini-pleated HEPA filters preform better than traditional separator pleated HEPA filter on aspects of air flow, initial  resistance, and dust holding capacity. The design of concentrated pleats could prolong the service life and decrease the  pressure drop. Mini-pleated HEPA filters are suitable for clean rooms, workstations and benches FFU.

No corrugated separator                                                                              High efficiency and low resistance
Leak detection one by one according to EN1822                                        Thinner pleats gap and bigger filtration area         

Sealing Method                                                                                                            Separator                                 Sealant     
Mini-Pleated HEPA filters are mainly mechanically  sealed with gasket.        Hot melt adhesive                    Twin component Polyurethane
                     
Filter media:
The HEPA filter media is high density ultra  fine glass fiber paper which is well pleated  and assembled into frame, separated by hot  melt glue instead of traditional corrugated  separator. This design minimizes the resistance  occurred while the air flow passing through  the filters. The gaps between the frame and  the media are well sealed by sealant to avoid  leakage.

Application:
Mini-Pleated HEPA Filters are widely used for terminal filtration in extremely high cleanliness requirement  environments, such as electronics and semiconductor manufacturing, precision machinery, pharmaceuticals,  hospitals and food processing, etc.

Frame:
Aluminum profile, Stainless steel sheet, Wooden

Media:
Ultra-fine glass fiber paper

Efficiency:
H13(EN 1822): 99.95% at 0.3μm @0.45m/s
H14(EN 1822): 99.995% at 0.3μm @0.45m/s
U15 (EN1822) 99.9995% at 0.3um @ 0.45m/s

Face Guard:
Aluminum profile, Stainless steel sheet, Wooden

Working condition
Continuous Operating Temperature: ≤ 70ºC ,  Humidity: ≤ 90% RH
Recommended Final resistance:<=600Pa

Technical Parameters:
 

Width(mm)	Height(mm)	Depth(mm)	Airflow / Pressure Drop(m3/h / Pa)	EfficiencyEN1822
305	610	70	300/105	H13
570	570	70	530/105	H13
610	610	70	600/105	H13
762	610	70	750/105	H13
914	610	70	900/105	H13
1170	570	70	1080/105	H13
1170	870	70	1650/105	H13
1170	1170	70	2220/105	H13
305	610	70	300/130	H14
570	570	70	530/130	H14
610	610	70	600/130	H14
762	610	70	750/130	H14
914	610	70	900/130	H14
1170	570	70	1080/130	H14
1170	870	70	1650/130	H14
1170	1170	70	2220/130	H14
305	610	70	300/145	U15
570	570	70	530/145	U15
610	610	70	600/145	U15
762	610	70	750/145	U15
914	610	70	900/145	U15

1170	570	70	1080/145	U15
1170	870	70	1650/145	U15
1170	1170	70	2220/145	U15
305	610	80	300/95	H13
570	570	80	530/95	H13
610	610	80	600/95	H13
762	610	80	750/95	H13
914	610	80	900/95	H13
1170	570	80	1080/95	H13
1170	870	80	1650/95	H13
1170	1170	80	2220/95	H13
305	610	80	300/115	H14
570	570	80	530/115	H14
610	610	80	600/115	H14
762	610	80	750/115	H14
914	610	80	900/115	H14
1170	570	80	1080/115	H14
1170	870	80	1650/115	H14
1170	1170	80	2220/115	H14
305	610	80	300/125	U15
570	570	80	530/125	U15
610	610	80	600/125	U15
762	610	80	750/125	U15
914	610	80	900/125	U15