BIPV 10 Solar Energy Products System Price in Pakistan

Min.Order: 100

Product origin: Baoding, Hebei, China

Infringement complaint:

Complaint

US$ 0.68

Description

Mechanical Specifications
External Dimensions	1722x1134x30mm
Weight	20.5kg
Solar Cells	Mono crystalline 182mm (2x54pcs)
Front Glass	AR Coated 3.2 mm tempered glass
Frame	Anodized aluminum alloy
Junction Box	IP68
Output Cables	4.0mm3, 50cm (t), 50cm (), length can be customized
Connector	MC4 EVO2
Mechanical Load	Front Side Max. 5400Pa, Rear Side Max. 2400Pa

Electrical Characteristics (STC/NOCT)
Module Type	JS385M10		JS390M10		JS395M10		JS400M10		JS405M10		JS410M10
	STC	NOCT	STC	NOCT	STC	NOCT	STC	NOCT	STC	NOCT	STC	NOCT
Maximum Power- Pmax(W)	385	290	390	294	395	298	400	302	405	306	410	310
Open Circuit Voltage - Voc(V)	36.76	34.49	36.85	34.62	36.98	34.75	37.07	34.88	37.23	35.12	37.32	35.23
Short- Circuit Current - lsc(A)	13.53	10.82	13.61	10.89	13.70	10.96	13.79	11.03	13.87	11.10	13.95	11.16
Voltage at Pmax -Vmp(V)	30.44	28.66	30.64	28.87	30.84	29.08	31.01	29.26	31.21	29.47	31.45	29.72
Current at Pmax - lmp(A)	12.65	10.18	12.73	10.18	12.81	10.25	12.9	10.32	12.98	10.38	13.04	10.43
Module Efficiency -nm(%)	19.8	/	20.0	/	20.2	/	20.5	/	20.8	/	21	/
Power Tolerance(W)	(0, +4.99W)
Maximum System Voltage(V)	1500Vdc (IEC )
Maximum Series Fuse Rating (A)	25A
STC : Irradiance 1000W/m 2, Cell Temperature 25 C , Air Mass 1.5NOCT : Irradiance 800W/m, Ambient Temperature 20 C , Air Mass 1.5, Wind Speed 1m/s

What is the structure of BIPV?
High-efficiency crystalline silicon solar cells, ultra-clear tempered glass, EVA/PVB, welding ribbon, bus ribbon, junction box, cable,
What is the difference between a BIPV installed on a building's facade and a roof ?
The roof installation forms mainly include horizontal roof, sloping roof and photovoltaic lighting roof. Among them: the horizontal roof glazing array can be installed at the best angle to obtain the maximum power generation, and conventional crystalline silicon photovoltaic modules can be used to reduce the investment cost of modules, and the economy is relatively good, but the aesthetics of this installation method is average . Sloping roofs can be used to install photovoltaic arrays on roofs facing due south, southeast, southwest, due east or due west in the northern hemisphere. On sloping roofs facing due south, they can be installed according to the best orientation or close to the best orientation. Side facade installation mainly refers to the way of installing photovoltaic modules on the south wall, west wall, and east wall of a building. For high-rise buildings, the wall is the outer surface with the largest contact area with sunlight, and photovoltaic curtain walls are more commonly used. A way of applying.

Forward

Related products

BIPV 10 Solar Energy Products System Price in Pakistan

US$ 0.68

Commercial Solar Power System of Solar Mounting Brackets Structure for Solar Panel Products Solar Energy System on Flat Tile Rooftop/Ground/Carport/BIPV

US$ -1

Commercial Solar Power System of Solar Mounting Brackets Structure for Solar Panel Products Solar Energy System on Flat Tile Rooftop/Ground/Carport/BIPV

US$ 0.59 ~ 0.9