Sanitary Stainless Steel Removable Clamp Connection Plate Heat Exchanger for Disinfection

Min.Order: 1

Product origin: Wenzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 800 ~ 850

Description

Sanitary stainless steel removable clamp connection plate heat exchanger for disinfection

Compass Plate type heat exchanger is an efficient heat exchanger composed of a series of metal sheets with a certain corrugated shape stacked together. Thin rectangular channels are formed between various plates for heat exchange. Plate heat exchangers are ideal equipment for heat exchange between liquid liquid and liquid vapor. It has the characteristics of high heat exchange efficiency, small heat loss, compact and lightweight structure, small footprint, wide application, and long service life. Under the same pressure loss, its heat transfer coefficient is 3-5 times higher than that of the tubular heat exchanger, its floor area is one-third of that of the tubular heat exchanger, and its heat recovery rate can be up to 90% or more.

Applications

Our plate type heat exchanger is widely used in food and beverage processing. 1.All kinds of dairy products: Fresh milk, milk powder, milk drinks, Yogurt and so on. 2.Vegetable protein drinks: Peanut milk, milk tea, soy milk, soy milk drinks, etc. 3.Juice drinks: Fresh fruit juice, fruit tea and so on. 4.Cool tea drinks: Tea drinks, reed drinks, fruit and vegetable drinks, etc. 5.Seasoning: Soy sauce, rice vinegar, tomato juice, sweet chili sauce, ect. 6.Breweries: Beer, rice wine, wine and so on. The plate type heat exchanger is applied to other industrial liquid treatment. Pharmaceutical, printing and dyeing, heating and heat exchange, chemical, power plant, swimming bath heating, petroleum, metallurgy, hot water, ship, machinery, paper, textile, geothermal utilization, environment protection, refrigeration.

Commodity	Plate Type Heat Exchanger
Type of Plate Type Heat Exchanger	Detachable Plate Heat Exchanger (also known as plate heat exchanger with sealing gasket)
	Welded Plate Heat Exchanger
	Spiral Plate Heat Exchanger
	Plate Coil Heat Exchanger (also known as honeycomb heat exchanger)
Process Combination Form	Single Process, Multi Process, Mixed Process
Material Contact Parts	SS304(1.4301)/SS316L (1.4404)	Provided with material inspection report
Material Non-contact Parts	SS304(1.4301)
Sealing Material	NBR,EPDM,Silicone,FKM	All material comply with FDA21CFR117.2600
Flow	0.1-1000m³/h
Exchanger Type	Heating,Cooling,Evaporation,Sterilization and Disinfection
One Plate Exchanger Area	0.02m²,0.04m²,0.06m²,0.08m²,0.12m²,0.13Bm²,0.15m²,0.22m², 0.24m²,0.32m²,0.4m²,0.65m²,0.75m²,0.85m²,1.54m²,1.8m²
Plate Thickness	0.7-1.0mm
Connection	Union,Tri-clamp, Flange
Max. Pressure	10bar (145psi)
Workingl Pressure	0-6bar (0-87psi)
Working Temperature	14 ~ 302°F (-10ºC~+150 ºC)
Sterilization Temperature	302°F (150°C)≤30min
We can also customize products according to customer requirements

Item	Name	Item	Name
1	Bushing	7	Rear clamp plate
2	Front Plate	8	Upper Guide Rod
3	Lower Guide Rod	9	B Plate
4	Tighten Bolts and Nuts	10	A Plate
5	E Plate	11	D Plate
6	Guide Bar Support

Process Flow of Plate Type Heat Exchanger

1.Because of the special effect of the plate corrugated surface, the fluid flows along the corrugated channel. The velocity direction of the plate heat exchanger changes constantly, which results in the strong end-movement of the fluid at a small flow rate, thus strengthening the heat transfer process. It effectively improve the heat transfer capability and has the outstanding advantages of compact structure, low metal consumption, flexible operation and long service life.

2.The process of heat exchanger is composed of many plates assembled according to a certain process and requirement of the buyer. When assembling, A and B plates are arranged alternately and a network is formed between the plates. The sealing gasket seals the cold and hot media in the heat exchanger. Meanwhile, the cold and hot media are separated reasonably without mixing. Exchanger so as to achieve the desired effect.

3.There are many kinds of flow combinations of plate heat exchanger, which are realized by different reversing plates and different assembly. The process combination can be divided into single process, multi process and mixer process.

Model	Plate Size(MM)	Channel	Heat Exchanger Area(M²)	Flow (T/H)	Plate Quantity (PCS)	Connection Size (MM)
CPS-0.06	1605000.5	Single Channel	1	0.5	17	32mm
CPS-0.06	1605000.5	Double Channel	3	1.5	20+31	32mm
CPS-0.13	2008000.4	Double Channel	5	2.5	15+24	38mm
CPS-0.13	2008000.4	Double Channel	7	3	22+33	38mm
CPS-0.13	2008000.4	Double Channel	10	5	31+46	38mm

Basic information
each plate contains two parts:
Metal plate:It is an important heat transfer element for pressing metal sheet with corrugation, sealing groove and corner hole. Corrugated not only can strengthen heat transfer, and can increase the sheet and rigid, so as to improve the bearing capacity of the plate heat exchanger, and because turbulence prompted the liquid state, so it can reduce the formation of sediment or dirt, play a role in "self-cleaning".
Sealing gasket: installed in the slots along the perimeter of the plate of the gasket and seal plate between the peripheral, prevent fluid leak outward, and according to the requirements of design, the sealing part of the Angle of hole, the cold and hot liquids according to their respective port flow.

Sealing principle:
The corrugated plate is pasted with sealing gasket, which is designed to double seal structure and has signal hole.When the medium leaks from the first seal, it can leak out from the signal hole, and the problem can be detected and solved as soon as possible, without causing the mixing of the two media.Sealing gasket according to different media and operating temperature to choose different types of rubber.

If small order and choose by express , the items are packed by shrink wrap and secondly carton cases.
If heavy weight of cargos ,which be packed by strongly seaworthy plywooden cases .
In order to protective items , which will be packed by safety and resistance to shock in plywooden cases .

Founded in 2011, Xusheng Machinery as a global sanitary valves manufacturer,has grown to become one of leading valves manufacturers for high precision stainless steel sanitary valves, pipe fittings,pumps and tanks.

Totally 112nos of workers and the factory Covers 4035m2,our warehouse covers 1000m2. We have 29 sets of LG Mazak machines and other CNC machine from Japan ; Meanwhile,we have 2 sets of automatic machining unit.

To assure better quality, we have the full inspecting quality control equipment: 1nos Ra roughness instrument, 3nos stainless steel spectrometer, numbers of roundness instrument, numbers of thickness instrument, numbers of radius instrument, 3 nos pressure testing center.

Xusheng Machinery is still developing and innovating new products to ensure that the products are more energy-efficient, efficient and competitive.

Q1. Are you a trading company or factory?
We are a manufacturing factory.

Q2. What's the payment terms?
For small testing orders,we accept Paypal,Western Union,T/T and credit Card.
For mass orders,we accept T/T and L/C.

Q3.How do you control the quality?
Quality control is very important to avoid material mixing and poor quality.We control the quality from beginning to the end.We only have 304 and 316L two different materials.100% inspection on raw material.During production,different materials in different place.After materials are finished,we choose 10% for inspection.If there is 0.1% problem in 10%,then no excuse to go ahead for inspecting 100% of the materials.

Q4.If there is any quality problem,how do you solve it?
We are proud that we never let one customer leave us.We are not 100% perfect,there is some quality problem.We try our best to provide the correct materials in the beginning,so we need less time for quality problem.If there is any quality problem,we take the responsibility.We believe what we are doing together,it will get back tomorrow.If we leave our responsibility,customer will leave us.If we always take our responsibility,we keep our customers with us.

Q5.How long is your delivery time?
For normal production in 7-10days.For bulk order in 15-25days.

Q6.Warranty
One year warranty for all of our stainless steel products.Gaskets are not included due to the different application for
customers.

How to order plate heat exchanger
What's product used for plate heat exchanger ? such as milk
What milk inlet temperature ?
What's milk outlet temperature ?
What's capacity for milk ?
What's media inlet temperature ?
What's media ? if Media is water, please also kindly inform us .
What's capacity for water?
What's Sterilizing temperature ?
What's cooling or heating temperature ?