Complaint
Bursting Strength Tester for Testing Fabric, Textile
This XHF-16 Fabric Bursting Strength Tester is a powerful, multi-industry instrument that has been extensively re-designed with a modern look and a range of new features that inherently make it possible to test a wide range of materials including textiles, nonwovens Cloth, paper, cardboard, plastic and medical products.
Test Standard:
GB/T7742.1, FZ/T60019, FZ/T01030, ISO 13938.1, ISO 13938.2 , ASTM D 3786, JIS L1018.6.17, IWS TM29
Features:
1 . Multiple test chuck can be selected to meet different standard.
2. The test cover is a high transparent organic glass with a built-in LED clamp, which can clearly observe the test process of the sample. It is magnetite to absorb and install, and it is convenient to replace and disassemble, Integrated safety shield.
3. The sample clamping surface is a special tooth-shaped clamping surface, which is automatically and pneumatically clamped. The clamping force and bursting force of the sample are on the same axis; the uniform clamping force is adjustable; it can be used for clamping various materials in all directions hold.
4. Clamping Pressure - adjusts sample clamping pressure to the requirements of the standard.
5. Automatic Flow Control - ensures that the sample will burst in the time frame specified by the standard.
6. Diaphragm Correction - subtracts out the pressure it takes to inflate the bare diaphragm.
7. Laser Distension Measurement - many tests want the height of the bursting point.
8. Equipped with imported servo driver and motor, hydraulic oil volume rate: 8ml/min-500ml/min (adjustable) feedback adjustment is precisely controlled to ensure that the sample is broken within 20±5S. It truly reflects the bursting performance of the sample.
9. The wide test results can be directly display, such as: burst strength, burst strength, diaphragm pressure, burst height, burst time.
10. Equipped with printer interface and online interface.
11.The table surface of the instrument itself is made of special aluminum, which is light and clean, and never rusts.
12. Equipped with a laser distance measurement system, the burst height can be measured accurately and without interference.
Technical Parameter:
| Test Mode | Hydraulic | Pneumatic |
| Test Range | 0-2Mpa | 0-1200Kpa |
| Resolution | 1Kpa | |
| Test accuracy | ≤±1% | |
| Distension | 0.1-70mm | |
| Distension Accuracy | ±0.1mm | |
| Speed | 8ml/min-500ml/min adjustable | 10Kpa/s-200Kpa/s adjustable |
| Test bell | 50cm²(φ79.8mm±0.2mm), 7.3cm²(φ30.5mm±0.2mm) | |
| Clamping Control | 2 Buttons, Pneumatic | |
| Test method | Constant Speed Method, Fixed Pressure Method, Fixed Distension Method | |
| Dimension | 500mm×700mm×700mm | |
| Weight | 200Kgs | |
| Power Supply | AC 110V/220V, 50/60Hz | |
Bursting Strength Tester for Testing Paper, Corrugated Board
Technical Parameter:
| | XHV-02A | XHV-02B |
| Test specimen | Paper | Corrugated Board |
| Power Supply | Power:220V±10 50HZ | |
| Circumstance Temperature ºC | 20±10 | |
| Relative Humidity % | < 80 | |
| Hydraulic oil | Silicon Oil 85%, distilled water 15% | |
| Horsepower | Shockproof motor 1/4HP | |
| Induction way | Pressure converter | |
| Indicating way | Touch screen display | |
| The Diameter of upper Platen hole mm | 30.5±0.05 | 31.5±0.05 |
| The Diameter of Lower Platen hole mm | 33.5±0.05 | 31.5±0.05 |
| The dimension of rubber film mm | Thickness 0.8---0.9 | The height of middle bulge 2.5±0.2 The height of middle bulge 27.8 |
| The resistance of rubber film mm | When raise 9mm,20-40 | When raise 10mm,170-220 When raise 18mm,250-350 |
| The tension between two platen Kpa | ≥430 | ≥690 |
| Testing Range Kpa | 70-1570 | 250-5600 |
| Resolution Kpa | 0.1 Kpa | 1Kpa |
| Oil ml/min | 95±15 | 170±15 |
| Dimension | 500×300×540 mm | |
| Weight | 48kgs | |
