High-Quality Curtis Speed Controller 36-48V 350A AC1234-5371 Prorammable 4G Intelligient for Motor Vehicles

Min.Order: 1
Product origin: Hefei, Anhui, China
Infringement complaint: complaintComplaint
US$ 525 ~ 585

Description

     
 High-quality Curtis Speed Controller 36-48V 350A AC 1234-5371 Prorammable 4G Intelligient for Motor Vehicles

PRODUCT NUMEVOLTAGE OPTIONSMODELCOLORSIZEMQR
AC Motor Controller36-48v1234-5371BlackL211.6xW155xH74.71 PCS
CAR FITMENTCURRENTTEMP.TYPEWARRANTYPORT
Electric Sightseeing Bus lifted Golf Cart Forklift etc.350A-40ºC~50ºCAC Motor1 yearNingbo/Shanghai

Product Description



Increased Performance, Improved functionality
Higher performance form, fit and functional replacements for earlier Curtis Model 1234 AC controllers.
 
CE marked as a programmable safety device under
EN ISO 13849-1.
 
Models available from 250-350A output at 24-80V
system voltages.
 
Enhanced 64MHz micro and additional FLASH memory
doubles the available VCL code space and provides
more than twice the VCL execution speed.
 
Six additional VCL-configurable CAN 'mailboxes'
significantly increases CAN master capabilities.
 
Advanced Pulse Width Modulation techniques produce
low motor harmonics, low torque ripple and minimized
heating losses, resulting in high efficiency.


 

 



Unmatched Flexibility
Programmable for either traction or pump applications.
Field upgradeable software.
 
Integrated Battery state-of-charge algorithm and
hour meters.
 
Fully-featured generic software and VCL for typical
Warehouse Truck applications is included.
 
Comprehensive programming options and VCL allow other applications to be easily supported.
 
Curtis hand-held or PC Windows programming tools
provide easy programming and powerful system
diagnostic tools.
 
Integrated status LED provides instant diagnostic
indication.


 

 



Robust Safety and Reliability
Dual Microprocessor architecture cross-checks critical
circuits, logic, and software functions to ensure the highest possible functional safety performance level is achieved.
 
Insulated metal substrate power-base provides superior heat transfer for increased reliability.
 
Fail-Safe power component design.
 
Reverse polarity protection on battery connections.
 
Short circuit protection on all output drivers.
 
Thermal cutback, warning, and automatic shutdown
provide protection to motor and controller.
 
Rugged sealed housing and connectors meet
IP65 environmental sealing standards for use in
harsh environments.


 



Dimension Manual 

CURTIS AC Motor Controller 1234-5371

Programmable, 36-48V / 350A, Forklift & Pallet Truck Driving Motor Controller

1234 AC controllers are used by many utility vehicle makers, MIMA, HELI, HANGCHA, NOBLELIFT, EP, TCM, LIFTSTAR, XILIN, HYSTER, etc.

Overview:

The Curtis model 1234 provides advanced control of AC induction motors performing on-vehicle traction drive or hydraulic pump duties and offers the highest levels of functional safety.
 

Specifications:
 

PWM operating frequencyElectrical isolation to heatsink (min.)PWM operating frequencyMaximum encoder frequencyMaximum controller output frequencyHeatsink overtemperature cutoffHeatsink undertemperature cutoff
15 kHz500 VAC10 kHz15kHz300 Hzlinear cutback starts at 85°C; complete cutoff at 95°Ccomplete cutoff at -40°C
  • The 'E' difference: a significant enhancement to the CURTIS AC family, The 'E' models utilize a powerful dual-microprocessor logic architecture to provide improved performance and surpass the requirements of the latest international functional safety standards. CURTIS controllers 1238E provide advanced control of AC induction motors performing on-vehicle traction drive or hydraulic pump duties.
    They offer vehicle developers a highly cost-effective combination of power, performance and functionality. Designed primarily for use on small to medium material handling vehicles such as counterbalance or warehouse trucks. The Model 1238E is equally suitable for industrial utility vehicles.

    It is supposed that the CURTIS AC Controller need to be programmed before applying to a specific application. For the buyer without AC MOTOR CONTROLLER PROGRAMMING EXPERIENCE, please consult your cart/motor dealer and read carefully the CURTIS 1238SE AC Motor Controller Datasheet before making your purchase.

    As a professional supplier, we possess OEM programs (controller settings) of certain utility vehicles and forklifts. Buyers may contact us and send us the vehicle (forklift) information (manufacturer, model, year of production, etc.), for knowing if we can provide the controller with its OEM program.

  • According to the vehicle type and buyer's requirement, we may reprogram the controller 1234-5371 with CURTIS CURTIS Model 1313-4331 Handheld Programmer or CURTIS 1314 PC programming station. There is no extra cost for reprogramming the controller.

     

    Application Vehicle Example

     

    The Curtis Model 1238E is intended for use as the traction controller on class 3 material handling "walkies" and other small industrial trucks. It is equally suitable as the pump controller for auxiliary hydraulic functions on larger industrial vehicles.

    Example: controllers 1238E-5621 are used as driving motor controller of Noblelift pallet truck PT20. For more controller setting details, click here to download the controller parameter list (PDF format), controller program for Noblelift PT20. Attention, this controller program has steering function (working with an EPS controller 1220-2201). Some PT20 pallet trucks have not an EPS controller. The controller program is different for these trucks. For more details, please contact us.

    Two 24V 1232E controller models are often used by forklift and pallet truck makers:

  • 1232E-5121: 36-48V / 350A
  • Key Features:

  • CURTIS Model: 1232E-5121
  • Nominal input voltage: 36V
  • 2 Minute RMS Current Rating (amps): 250
  • S2-60 Minute RMS Current Rating (amps): 125
  • MOSFET overtemperature cutback: linear cutback starts at 100°C; complete cutoff at 110°C
  • MOSFET undertemperature cutback: approx. 50% motor current at -25°C; complete cutoff at -40°C
  • All low power connections are made through a single 35-pin AMPSEAL connector
  • Throttle Type:
    • Type 1: 2-wire rheostat, 5kΩ-0 input
    • Type 2: single-ended 3-wire 1kΩ-10kΩ potentiometer, or 0-5V voltage source
    • Type 3: 2-wire rheostat, 0-5kΩ input
    • Type 4: wigwag 3-wire 1kΩ-10kΩ potentiometer, or 0-5V voltage source
    • Type 5: VCL input (VCL_Throttle)
  • Operating Ambient Temperature Range: -40°C to 50°C
  • Internal Heatsink Operating Temperature Range: -40°C to 95°C
  • Storage Ambient Temperature Range: -40°C to 95°C
  • Package environmental rating: IP65
  • Dimensions: L140 × W180 × H71 mm mm
  • Net Weight: 1.70 kg
  • Features Include:

  • Increased Performance, Improved functionality
    • Higher performance form, fit and functional replacements for earlier Curtis Model 1232 AC controllers.
    • CE marked as a programmable safety device under EN ISO 13849-1.
    • Models available from 175A-250A output at 24-80V system voltages.
    • Enhanced 64MHz micro and additional FLASH memory doubles the available VCL code space and provides more than twice the VCL execution speed.
    • Six additional VCL-configurable CAN "mailboxes" significantly increases CAN master capabilities.
    • Advanced Pulse Width Modulation techniques produce low motor harmonics, low torque ripple and minimized heating losses, resulting in high efficiency.
  • Unmatched Flexibility
    • Easily programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
    • Programmable for either traction or pump applications.
    • Field upgradeable software.
    • Integrated Battery state-of-charge algorithm and hour meter.
    • Fully-featured generic software and VCL for typical Warehouse Truck applications is included.
    • Comprehensive programming options and VCL allow other applications to be easily supported.
    • CURTIS hand-held or PC Windows programming tools provide easy programming and powerful system diagnostic tools.
    • Integrated status LED provides instant diagnostic indication.
  • Robust Safety and Reliability
    • Dual Microprocessor architecture cross-checks critical circuits, logic, and software functions to ensure the highest possible functional safety performance level is achieved.
    • Insulated Metal Substrate power base provides superior heat transfer for increased reliability.
    • Fail-Safe power component design.
    • Reverse polarity protection on battery connections.
    • Short circuit protection on all output drivers.
    • Thermal cutback, warning, and automatic shutdown provide protection to motor and controller.
    • Rugged sealed housing and connectors meet IP65 environmental sealing standards for use in harsh environments.
  • Meets or complies with relevant US and International Regulations
    • EMC: Designed to the requirements of EN12895.
    • Safety: Designed to the requirements of:
      • EN1175-1:1998+A1:2010
      • EN (ISO) 13849-1
    • IP65 Rated per IEC 60529.
    • UL recognized per UL583.


      Products And Services:

      Production Line:

      Exhibition Pictures

       

       

       

      Company Profile

       

       

      Our company is located in HEFEI City, ANHUI Province China, is the large-scale professional agriculture Machinery,Forklift Parts manufacturer with integration of  manufacturing, export and after-sale service. Establish in 2017, by now Forklift electrical accessories basically cover the vehicles of major domestic brands( Such as Zhongli,Nuoli,Afterburner,Heli,Baoli,TCM TEU)

      The company′s main products cover Electric Vehicles,Electric Forklifts,Motor Controller ,Lithium battery and sell parts and accessories for electric Vehicles ,including motors Electric Controls ,meters,accelerators,control handles ,DC converters,power connectors ,wiring harness,Various electrical switches and so on.

      We have professional quality inspection department, every machine will be tested 3 times before delivery in order to make sure the machinery in future. 

      With high quality product, competitive price, and best after-sale service, we have gained good reputation from all over the world, such as Europe, South Korea North, America, Central and South America, Africa, Australia, New Zealand and so on.Base on it ,we welcome buyers from all over the world.

      FAQ

       

      Q: Can I have a sample order?
      A: yes, we welcome sample orders to test and check quality.

      Q: Do you offer a guarantee for the products?
      A: Yes, we offer a 1-year warranty on our products.

      Q: Which shipping will you offer?
      A: By sea, air,  DHL, FedEx, TNT, UPS, EMS, SF 

      Q: How to proceed with an order?
      A: Firstly let us know your requirements or application. Secondly, We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places a deposit for formal order. Fourthly We arrange the production.

      Q: Is it OK to print my logo on the product?

      A: Yes. Please inform us formally before our production and confirm the design first based on our sample.

      Q: Do you have any MOQ limit?

      A: Low MOQ, 1pc for sample checking is available
 
Product Tag:
Related categories:
Scroll to Top