Deinking Flotation Cell

Min.Order: 1

Product origin: Wuxi, Jiangsu, China

Infringement complaint:

Complaint

US$ 300 ~ 2000

Description

Deinking flotation cell

This flotation deinking tank is a laboratory instrument designed to remove and filter impurities from slurry suspensions, especially printing ink, fillers, coating particles, and adhesives. Used to evaluate the flotation effect of high dust content pulp, paper machine, and paperboard machine filtered suspensions.

Flotation deinking is the process of using bubbles and appropriate chemical additives to remove ink particles and hydrophobic granular substances similar to stickies from waste pulp.
The rotary shaft in the base of the flotation deinking tank rotates, driving the rotor blades installed in the tank to generate negative pressure when stirred, causing surrounding air to be brought into the slurry through the hollow rotary shaft. The added air flow rate is measured by an air flow meter and adjusted using a regulating valve. The stirring of the rotor blades causes the slurry to mix with the air to produce fine bubbles.
Bubbles will absorb ink particles and other hydrophobic impurities, and bubbles full of impurities will float to the slurry surface to form a foam layer; Scrape the foam into the central funnel through the scraper and discharge it from the discharge pipe. Because of the total liquid loss caused by foam overflow and sampling test, clean water or recycled water is required to compensate for the loss of pulp water suspended solids when completing continuous experiments.

1. Vertical design, with a central resin glass trough supported by three columns
2. Equipped with safety protection devices
3. Integrated main drive and control unit, magnetic coupled adsorption rotor
4. The integrated flow meter with a ventilation regulating valve can conveniently adjust the intake flow rate
5. Coaxial foam tube and scraper, scraper motor is DC motor
6. Capable of automatically cleaning the shaft and rotor
Technical parameters
1. Capacity: 25 liters (6.6 gallons)
2. Slurry concentration: up to 2%
3. Main motor speed: 1470rpm
4. Main motor power: 400W
5. Scraper motor speed: 10rpm
6. Scraper motor: 24VDC
7. Manufacturing materials: resin glass and stainless steel
8. Noise level: < 70dB
9. Protection level: IP54
10. Power supply: 90-264V, 47-64Hz
11. Instrument size: side length 490mm, height 923mm
12. Instrument weight: 28kg
13. Working environment: standard atmospheric pressure, no need to connect additional compressed air source
14. Attention: The instrument must be operated on a level and stable plane

Forward

Related products

Deinking Flotation Cell

US$ 300 ~ 2000

Paper Mill Flotation Deinking Cell for Paper Recycling Line

US$ 26000 ~ 46000

Flotation Waste Paper Pulp Deinking Cell for Paper Mill

US$ 1000 ~ 45000

Gold Flotation Cell Machine / Flotation Separator / Flotation Column of China

US$ 1000 ~ 30000

Sf Flotation Machine/Flotation Cell/Dissolved Air Flotation Machine

US$ 1000 ~ 80000

Froth Flotation Machine/Mineral Processing Flotation Unit/ Flotation Cell/ Flotation Tank/Flotation Separator/Small Scale Gold Copper Mining Equipment

US$ 1000 ~ 8000