Factory Direct Sales Gas Boiler Industrial Steam Generator

Min.Order: 1
Product origin: Weifang, Shandong, China
Infringement complaint: complaintComplaint
US$ 1000 ~ 6000

Description

Factory direct sales gas boiler industrial steam generator

Product Description

The new environment-friendly gas (oil) steam generator developed by our company does not need to apply for approval procedures, does not need annual inspection, can be installed easily, can choose liquefied gas, natural gas or light diesel as fuel.using three return combustion mode, low fuel consumption, thermal efficiency can reach more than 98%, with automatic control system and related safety devices, automatic interlocking control, Safe and reliable, fast steam out, steam pressure up to 0.7Mpa, can meet the food processing, biological chemicals, washing and ironing and other most of the use of steam industries.

Product Parameters

 
NO.NameGas steam generator
1ModelZTSG0.3T-0.7-Q
2BrandZhite
3Quantity1set
4Measured evaporation300KG/h
5Rated working pressure0.7MPA
6FuelLiquefied natural gas, natural gas
7Boiler thermal efficiency≥96%
8         Normal water volume48.7L
9 Fuel consumption/hNatural gas21NM3,LPG18kg
10Inlet DiameterDN20
11Main blowdown diameterDN40
12Waste heat recovery blowdown diameterDN25
13Steam outlet diameterDN25
14Safety valve diameterDN25
15Chimney diameterφ219
16Boiler body dimensions1800*1000*2200mm
17Total shipping weight of goods(1set)1500KG
18Control system modelGas steam generator specialized
19Power220V 50HZ
20Gas pipeline pressureStatic 5Kpa/ Dynamic 3Kap
 
(1)The steam generator with fully automatic operation, assembled before delievery, covers small area, low requirements with the installation site,one-button operation, no need boiler fireman; The design uses liquid crystal touch display automatic intelligent electronic control system, the operating system is fully automatic control, all the running state can be at a glance in the LCD screen,working state,water level state, steam pressure high and low state, water pump running state, fault alarm state can be observed in the display screen; Automatic water refill, automatic ignition, high and low pressure start and stop; All pipes and instruments are connected by Q345 seamless steel pipe connection, safe and reliable; Saturated steam is generated 8 minutes after the equipment is started and the output steam is quickly transferred into the production equipment.
(2)Energy saving and high efficiency
Design steam pressure is 0.1-0.7Mpa, equipment steam temperature is 110-170ºC; 35-40 cubic meters of fuel (natural gas) is required to produce 0.5 tons of steam; Boiler thermal efficiency is more than 96%, with multiple return combustion technology that the fuel combustion rate is more than 99.9%,use high temperature gas generated after fuel combustion can make waste heat recovery system water temperature to 60-80ºC, and then into the inner tank heating to produce steam, can effectively improve the equipment continuous gas production speed, after the waste heat recovery system smoke temperature < 100ºC, High efficiency and energy saving.
 

Detailed Photos

Our Advantages

1. Our equipment is made of famous brand accessories. Such as Chint appliances,Leo pump,Yinniu fan.

2, our boiler liner has formal procedures (1 liner 1 set of procedures),material is Q245R boiler special steel,thickness is national standard size 8 inside 6 outside, high thermal efficiency. some manufacturers welded their own inner liner (size of 3 and a half to 4)Burn out easily, in order to save costs and jerry-building, generally a year and a half or two years will burn through, and the liner after all belongs to the pressure vessel, once the safety problems will cause loss of interests and personal injury.

3, if equipment have quality problems during working time, we have 12 after-sales technicians, door-to-door service the first time .
 

Steam generator safety instructions

1. Pressure protection

Equipped with pressure gauge and pressure controller, accurately control the furnace pressure, according to the customer's use of pressure requirements to define the pressure interval, automatic stop to the pressure, low pressure automatic start. Two mechanical safety valves are connected to the top of the furnace liner, 8kg pressure protection, up to 8kg pressure valve open pressure relief.

2. Temperature protection

The inner wall of the furnace is connected with a set of temperature monitoring system to monitor the furnace temperature in real time. The factory default temperature protection is 240 degrees. When the temperature exceeds 240 degrees, the system will stop operation in an emergency and all lines of the equipment will be powered off.

3. Water protection

Equipped with the latest version of the three-point water level gauge, which has three built-in probes for high, middle and low levels to monitor the water level in real time. When the water level reaches the low level, the system automatically replenishes water. The furnace will not dry burn due to water shortage during use.

4. Circuit protection

The equipment electric box is equipped with leakage protector and AC contactor to protect the circuit and equipment. All electric appliances are made of Chint, with long service life and low failure rate.

5. Fault protection

The equipment adopts GPRS Internet computer controller, which can monitor the running state of the system in real time. If the running state is abnormal, the system will stop automatically.
6,Safety features,
The main equipment and the auxiliary facilities, pipelines, valves and electrical components associated with the system must meet the relevant national quality standards and safety standards, and have the corresponding anti-corrosion, pressure-proof, anti-leakage, insulation and explosion-proof capability levels. The combustion chamber is made of special steel structure.
7.
The control interface displays burner flameout fault and protection, ultra-high steam pressure fault and protection, system water shortage fault and protection, ultra-high water level in the furnace fault and protection, over-temperature protection, steam pressure sensor fault and protection, system power monitoring, anti-dry burning protection.

Other product

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 

After Sales Service

1. The warranty period of the company's products shall be 12 months from the date of signing the contract (the boiler body is within the scope of warranty, and other man-caused or irresistible factors are not within the scope of warranty).
2. According to the after-sales service tracking card, the service department of our company will take telephone tracking service to timely understand the operation dynamics of our company's products and protect the interests of users.
3. The service department and technology department of our company will train the steam generator management operators of the user in all maintenance operation techniques on the equipment of our company.
4, after the normal use of the steam generator to the warranty period, the steam generator and program control failure (non-human factors), only reasonable accessories fees are charged.

Customer visit

 

Company Profile

 

 
Product Tag:
Related categories:
Scroll to Top