Amada Machine Tool Clamps Sensor Yawei CNC Turret Punch Accessories

Material	718 Steel
Heat treatment	HRC 60°-  62°
Main motor power	1050(kw)
Nominal pressure	30-50(kn)
Available TruPunch Machines Model	AMADA AE2510NT, AMADA 357, TAILIFT HP2500, MATE Ultra system, Prima Power E5X, LFK T3, Accurpress E2000, JFY ET-300, YANGLI T30, YAWEI HPH-30, FINN-POWER, KOMATS, STRIPPIT, DATONG PTC-LX230
Forming tools	Extrusion tapping Tool, Extrusion Tool, Louver tool, Lance and Form tool, Cluster tool, Countersink tool, Half-cut tool, Plane positioning point tool, Knockout tool, Emboss Continuous tool, Thread screw tool, Center Point tool, HexLock tool, Bridge thread tool, MultiBend tool, Card guide tool, Hinge tool, Multi scribe tool, Logo tool, Ground symbol tool, Roller Rib tool, Roller Offset tool, Roller Shear tool, Roller Pincher tool, Roller Deburr tool
Option	Coating with TICN or Tin
Delivery time	3 - 10 Days

 

Ordering instructions (please note the following questions when ordering, please consult with the seller before photographing)
The above quotation for the clamp is a single quotation, one set is 2, if ordering, please specify two.
Whether the clamp contains cylinders must be determined first. The price difference between cylinders containing and without cylinders is large.
If only the upper jaw body is damaged, then the upper jaw body is customized (the general damage components are: upper jaw body, lower jaw plate, stopper part).
Clamp damage is a common problem. To ensure the continuity of work, you can consider one more device to prevent the machine from shutting down due to problems with the clamp.

Clamp protection method:
Choosing the right tool for trimming, it is recommended that under the conditions of the condition, we use the avoidance trimming knife to punch.
The thickness of the plate must be exercised within the limits of the clamp.
For thinner sheets can be added to prevent it.
Periodically check if the screws of each component are firm and if there is any fall-off phenomenon.

Double-acting Cylinder output force table unit: Kgf

Cylinder diameter: mm	The theoretical output force (thrust) unit of the cylinder: KG
	Use air pressure: MPa
	0.2	0.3	0.4	0.5	0.6	0.7	0.8
50	3.29	58.9	78.5	98.2	117	137	157

We hope that through online activities, to give you a better product and convenient service experience! Have any mold questions, can consult us, we will help you solve the problem the first time!

Yawei CNC punch clamp parts example:
Material Introduction
Clamps material: 718 steel
718 steel is Swedish one hundred pre-hardened mirror-type acid-proof plastic mold steel. The steel is pre-hardened, the material is uniform, the degree of cleanliness is high, and it has excellent polishing performance and lithographic properties. It also has high hardenability, good electrical processability and texture processing. Pre-hardened steel can be used for die casting without quenching. The flange can be flame-hardened to increase the hardness to 52HRC.
The steel has good machinability and wear resistance, and its hardness distribution is uniform. It also has good polishing performance, simple processing technology, and moderate price, so the amount is larger.
 

Dongguan Quapin Hardware Co.,Ltd.
Dongguan Quapin Hardware Co., Ltd is a joint venture, it specialize in R&D, manufacturing both domestic and abroad CNC turret punch press tooling (NCT) mould. Quapin is Dongguan one of the most large-scale CNC turret punch press tooling manufacturer.
QUAPIN is equipped with advance production equipment and inspection equipment. For example, CNC Center has CNC machining center, CNC computer lathe, sodick CNC wire-cut machine, CNC EDM machine, Professional internal grinding, Precision cylindrical grinder, Precision flat stone mill other other advanced processing equipment and optical projections, Hardness tester, Sand blasting machine, Marking machine and other high-precision testing equipment. After years of efforts, the company established scientific, high-efficiency, perfect management system as well as CAD/CAM/UG manufacturing capability.
Quapin specializes in the research, development and manufacturing of CNC turret punch press molds. We provide one-on-one free technical service, lightning delivery and intelligent stocking; try our best to help the sheet metal manufacturing enterprises to increase production efficiency and minimize the processing cost of each product.
We Qaupin products team silently in the tens of thousands of sheet metal business, elevator business, sheet metal machine tool business, the world's top 500 enterprises and other services;
Quapin products in the mold to ensure quality, quality service at the same time, we constantly innovate! Adhering to do our best to help sheet metal production enterprises to improve production efficiency, the processing cost to a minimum!

Q: Are you trading company or manufacturer ?
A: We have 11 year experience in the production of the factory, we are Dongguan mold production base. For the customer we offer the price of competitive, professional production, adequate supply, high production efficiency, greatly expanding the interests of customers.

Q: How long is your delivery time?
A: Generally it is 3-7 days if the tools are standard. Or it is 15-20 days if the tools is special forming shape.

Q: Do you provide samples ? is it free or extra ?
A: We do not provide samples.

Q: Do not receive the goods after payment or product delivery error how to do?
A: The customer is paid to Alibaba One Touch's account at the time of payment, and Alibaba will guarantee a full refund when you encounter both cases

Q: How is your after-sales service?
A: After the delivery of mold quality problems, replacement(except man-made damage)

Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.