Complaint
Model | GT2-5 |
Applicable Industries | Building Material Shops, Manufacturing Plants, Retail, Construction works, Energy & Mining |
Working Capacity | 2-5 mm, Cold Rolled & Hot Rolled Round Bar/Deformed Rebar |
Finish Product Length | 0.1 - 6m, Adjustable OR customized |
Length Tolerance | ≤±1 mm |
Straightness | ≤2mm/m |
Working Speed | 100-130 m/min, Max. 150m/min |
Straightening Mode | Rotating Straightening Drum |
Wire Feeding Mode | Electric Motor |
Wire Cutting Mode | Servo Motor Cutting |
Total Motor Power | 4.0Kw + 3.8KW+2.6kw |
Main Straightening Motor | 4.0Kw, normal motor |
Pulling Motor | Servo Motor Pulling 3.8KW |
Cutting Motor | Servo Motor Cutting 2.6KW |
Control Mode | PLC |
Steel Wire Strength(Steel Grade) | Tensile Strength ≤ 550MPa Low Carbon Steel Wire |
Electric capacity | ≥20KVA |
Power Supply Line | Cross-sectional Area: 6mm2 ; Material: Copper Material |
Air consumption | Working Pressure 0.6MPa, Flow Rate 18m3/h(0.3m³/min) |
Voltage | 3 Phase, 380V 50Hz or Customized |
Dimension(L*W*H) | 1500mm×1000mm×1200mm |
Weight (KG) | 1.0 tons |
Warranty | 1 Year |
Key Selling Points | Long Service Life |
Mian Advantage | High Efficient and High Working Speed |
GT2-5 Steel Coil Wire Straightener and Cutter
GT Series High-Speed Steel Wire Straightening and Cutting Machine used for straightening and cutting 2-5/3-6/3-8mm hot-rolled and cold-rolled steel coil wire and deformed rebar. mostly used in steel mesh production plants, precast concrete component produces factory, normal building projects, construction, tunnel, bridge, dam, high-speed roads, High-speed trains, and so on.
1. Suitable for straightening and cutting cold-rolled round bar/ribbed bar, and hot-rolled round/ribbed bar.
2. Intelligent control: The machine is controlled by PLC, touch screen and servo motor (Housine servo), and Frequency converter control working speed. Easy operation and working reliably
3. Low failure rate: Due to the fine processing of parts and strict quality control, after installation and debugging, under normal working conditions, it can maintain trouble-free operation for a long time.
4. World Advanced & Leading technology: Machine straightening and cutting technology
5. There are four working speeds: 70m/min, 100m/min, 130m/min, and 150m/min, Normally working speed: is 130m/min, if you finish the product length of less than 2m, suggest 70-100m/min. Max. Working speed: 150m/min
6. High cutting accuracy: length tolerance: ≤ ±1mm
7. High straightness: ≤ 2 mm/m
