Special tips for our tanning machine
Before installing the device, you should pay attention to the following points:
1. Do not use in wet places;
2. The device requires a dedicated line that can provide 16A of power. The
power cord of the device must be connected directly to the junction box of the
dedicated circuit. We recommend connecting with a professional electrician.
Refer to the local and/or country code power configuration with appropriate
circuit breakers and wire gauges;
3. Keep the power off when servicing or cleaning the inside of the operating
cabin. Maintenance not mentioned in this instruction can only be performed by
a professional electrician. Do not use liquid to clean charged parts;
4. When installing the equipment, ensure that there are no obstructed items
within 1 meter around the machine to ensure normal heat dissipation;
5. If you place the instrument in a small room, make sure there is enough
distance between the instrument and the wall, and that air is circulated.
Should be used to ensure that the indoor temperature is below 25 ° C;
6. Avoid having acrylic sheets in contact with hard objects;
7. If there is wire damage, it must be replaced by the manufacturer or service
agent or related professionals to avoid injury;
8. When the machine is not in use, the machine door should be kept normally
open to extend the life of the machine.
Complaint
