Complaint
| PRODUCT NAME | MET PET FILM 10 MICRON | |||
| ITEM | Unit | Index | Testing Condition | |
| TENSILE STRENGTH | MD | Mpa | 241 | Temperature:23ºC Relative humidity:40% |
| TD | Mpa | 233 | ||
| ELONGATION AT BREAK | MD | % | 112 | |
| TD | % | 106 | ||
| C.O.F. | ------ | 0.545 | ||
| Corona Treatment | DYNE | 54 | ||
| WETTING TENSION OF ALUMINUM LAYER | OD | 2.2 | ||
| MOISTURE-VAPOR TRANSMISSION RATE | g/(m2*24h) | 1.5 | Temperature:38ºC Relative humidity:91% | |
| OXYGEN TRANSMISSION RATE | cm3/(m2*24h*0.1MPa) | 9.85 | ||
Technicaldata sheet of VMPET film:
| Typical Value | Testing Condition | |||
| Item | Unit | Index | Testing Condition | |
| Tensile Strength | MD | MPA | 213 | Temperature:23°C, Relative humidity:40% |
| TD | MPA | 201 | ||
| Elongation At Break | MD | % | 121 | |
| TD | % | 105 | ||
| Friction factor | The surface without Aluminum plating | - | 0.56 | |
The surface without Aluminum plating | - | |||
| Equality of aluminized layer | % | ±5 | ||
| High temperature sealing | % | 5 | ||
Adhesion of the aluminized layer (theindicated by the discrete areas of the aluminum layer) | mN/m | 54 | ||
| Wetting tension of Aluminum layer | Ω/ | 2 | ||
| Moisture-vapor transmission rate | g/(m2 ·24h) | 0.75 | Temperature:38°C, Relative humidity:91% | |
| Oxygen transmission rate | cm3/( m2·24h·0.1MPa) | 0.8 |
Service:
1.Strict quality control system
2.Good Service & Good reputation in the market.
3. Low MOQ can meet your promotional business very well.
4.Fast Delivery & Cheap Freight Charge from forwarders.
