Main Features: - The Ku series transmitter is specifically researched, designed and produced according to the demands of customers.
- Indoor type with touchable LCD control panel to adjust the key parameters: Ouput power range, Input level range, AGC range and monitor the abnormal values real-time.
- Outdoor type is designed with waterproof structure, its convenient modular design can arrange on antenna directly to reduce the loss of feeder.
- With a wide frequency band, large program capacity and strong ability of anti-interference. Operation frequency: 10700-12000MHz.
- Optional Output Power: 200mW/2W/4W/8W/10W/12W/15W/24W.
- Low cost in receiver: TV signal can be easily received with any Ku Receiving antenna existing in market installed.
- With simple process in installment and debugging,convenience in maintenance.
- With RFU modularization, broadband and high consistency design, super-linear and all-solid-state power amplifier.
- Automatic Level Control in larger dynamic range(ALC); Automatic Gain
- Control(AGC); adaptation of wide dynamic range in different environments.
- With over-VSWR, over-voltage, over-current, over-heat and lighting auto-protective functions.
- With extended interface for remote control and GSM message auto-alarm system (optional), concentrated monitoring can be achieved.
- With the international and the domestic advanced level of the design and production of equipment.
- Combined Ku series transmitter with MMDS/DVB-T transmitters of TYE, we can build seamless coverage system with higher cost performance.
Tx specification :
1.
IF Input Frequency Band: 950-1450MHz
Local Oscillator frequency: 13.05GHz
RF Output Frequency Band : 14.0-14.5GHz
2.
input frequency (GHz) 950 - 1700 MHz
l.O. frequency (GHz) 12.80 GHz
Output frequency (mHz) 13.75 - 14.5 GHz
17.3-18.1 GHz
1w 2w 4w 6w 10w 20w and so on
Local Oscillator Pease Noise (RMS 100H to 1MHz) : 2.5°
Input impedance: 75Ω
Input VSWR: 2.5:1
Input power range: -25 to -5dBm
Output saturated powe: 33dBm (2W) typical
Output saturated power : 32-24.5dBm versus all condition
Power flattens: 2dB typical
Output noise : -94dBm/Hz
Output spurious level:
13.6-14.9GHz.: -25dBm
28.0-29.0GHz: -20dBm
Linear Gain : 59 min
DC Characteristics:
Input Voltage Range at Tx IF connector: 13-24V
Tx Power consumption : 18W typical
Non Damage voltage : 0-30V
Environmental condition
Operational temperature range :-40 -70°C
Non-operating temperature : -50 -80°C
Moisture/humidity protection: IP67
Physical/Electrical Interfaces:
75-Ohm female F-Type connector
DC power
IF L Band
Output Tx Signals via WR 75 without grooved with gasket