Steel Strand Tensioning Anchorage Prestressed Anchorage for Bridge Construction Anchorage for Construction Engineering

Min.Order: 100

Product origin: Xi'an, Shaanxi, China

Infringement complaint:

Complaint

US$ 3 ~ 5

Description

Product Description

YJM Tensioning System has been widely adopted by modern construction, mainly used in pre-tension or post-tension for concrete structures and building materials.

YM Series products are composed of tensioning anchors, holding anchors, and connectors. It can lock the steel strand wires on/under classes of 2000Mpa standard strength, usually in diameters of 12.7mm /12.9mm/15.2mm/15.7mm.

Technical Parameter

Technical data of YJM13 Anchorage
Specification	Anchor Head		Bearing Plate		Duct	Spiral Reinforcement				Stressing Jack
	ΦA	B	Square	Round	ΦE(ID)	ΦF	H	ΦG	N
	ΦA	B	C*D	ΦC*D	ΦE(ID)	ΦF	H	ΦG	N
YJM13-1	38	40	80×10	-	35	80	30	6	3	QYC270
YJM13-2	76	42	115×80	120×80	45	120	40	8	3	YDC1100
YJM13-3	83	42	120×80	130×80	50	120	40	10	3	YDC1100
YJM13-4	87	42	130×87	135×85	50	135	50	10	3	YDC1100
YJM13-5	97	42	140×92	140×100	55	140	50	10	4	YDC1100
YJM13-6	107	45	150×97	150×125	60	160	50	12	4	YDC1100
YJM13-7	107	45	150×97	150×125	60	160	50	12	4	YDC1100
YJM13-8	117	45	165×115	165×135	60	170	50	12	4	YDC1500
YJM13-9	127	48	175×125	175×140	70	180	50	12	4	YDC1500
YJM13-10	136	48	180×130	180×150	80	200	50	14	4	YDC2500
YJM13-11	138	50	180×130	180×150	80	200	50	14	4	YDC2500
YJM13-12	143	50	190×140	190×150	80	210	50	14	5	YDC2500
YJM13-13	147	53	190×140	190×150	80	210	50	14	5	YDC2500
YJM13-14	153	53	195×150	200×160	80	220	50	14	5	YDC2500
YJM13-15	157	55	195×150	200×160	90	220	50	14	5	YDC2500
YJM13-16	167	55	210×160	210×185	90	240	60	16	6	YDC2500
YJM13-17	172	58	220×175	235×185	90	240	60	16	6	YDC3500
YJM13-18	176	58	235×175	235×185	90	260	60	16	6	YDC3500
YJM13-19	176	58	235×175	235×185	90	260	60	16	6	YDC3500
YJM13-20	196	60	270×185	260×200	90	270	60	16	6	YDC3500
YJM13-21	196	63	270×185	260×200	90	270	60	16	6	YDC3500
YJM13-22	196	65	270×185	260×200	90	270	60	18	6	YDC3500
YJM13-23	206	65	295×245	275×260	100	280	60	18	6	YDC4000
YJM13-24	206	68	295×245	275×260	100	280	60	18	6	YDC4000
YJM13-25	216	68	300×260	275×290	100	290	60	18	6	YDC4000
Technical data of YJM15 Anchorage
Specification	Anchor Head		Bearing Plate		Duct	Spiral Reinforcement				Stressing Jack
	ΦA	B	Square	Round	ΦE (ID)	ΦF	H	ΦG	N
	ΦA	B	C×D	ΦC×D	ΦE (ID)	ΦF	H	ΦG	N
YJM15-1	43	46	80×12	80×20	35	80	30	8	4	QYC270
YJM15-2	83	48	130×85	135×80	50	120	40	10	4	YDC6500
YJM15-3	87	48	130×87	135×85	50	120	40	10	4	YDC650
YJM15-4	97	48	140×92	140×100	50	140	50	10	4	YDC1100
YJM15-5	107	48	150×97	150×120	55	150	50	10	4	YDC1100
YJM15-6	122	50	165×115	165×135	70	170	50	12	4	YDC1500
YJM15-7	122	50	175×125	175×135	70	170	50	12	4	YDC1500
YJM15-8	137	53	180×130	180×150	80	190	50	12	4	YDC2500
YJM15-9	147	53	190×140	190×150	80	200	50	12	4	YDC2500
YJM15-10	157	53	195×150	210×160	90	210	60	14	4	YDC2500
YJM15-11	157	55	210×160	210×160	90	210	60	14	4	YDC2500
YJM15-12	167	55	210×160	210×185	90	230	60	14	4	YDC2500
YJM15-13	177	55	220×175	210×185	90	230	60	14	4	YDC3500
YJM15-14	177	58	225×175	235×185	90	240	60	14	4	YDC3500
YJM15-15	187	60	235×175	235×185	90	260	60	16	5	YDC3500
YJM15-16	187	60	240×175	235×185	90	260	60	16	5	YDC3500
YJM15-17	197	63	250×185	265×200	100	280	60	16	5	YDC4000
YJM15-18	197	63	270×185	265×200	100	280	60	16	5	YDC4000
YJM15-19	197	63	270×185	265×200	100	280	60	16	5	YDC4000
YJM15-20	217	68	295×245	285×260	120	290	60	16	5	YDC5000
YJM15-21	217	70	295×245	285×260	120	290	60	16	5	YDC5000
YJM15-22	217	70	295×245	285×260	120	290	60	18	5	YDC5000
YJM15-23	237	73	310×260	320×260	120	320	60	18	5	YDC5000
YJM15-24	237	75	310×260	320×260	120	320	60	18	5	YDC5000
YJM15-25	237	78	310×300	320×300	120	330	70	18	5	YDC6500

Details & Features

The prestressed anchor is generally composed of four parts, anchor ring, clamp, cushion plate, and screw bar. It is suitable for anchors used for prestressed tension of concrete in engineering construction. In general, it is often used in bridge construction, pre-installed positioning, and then pouring concrete, buried at both ends of concrete, that is, the two ends of the bellows, to set the end face when the stability of the jack tension.

Application

Packing & Shipping

FAQ

1. Are you a manufacturer?

Yes. We are one of the leading manufacturers

2. Do you have Stock productions to sell?

Yes, of course. But we also offer OEM service. Please send us some drawings.

3. What information do you want to know if I want to get a quotation?

a). The model/size of your products.

b). The application for your products.

c). Special package methods if you need them.

d). Raw material.

4. Do you inspect the finished products?

Yes. Each step of products will be carried out inspection by the QC department until shipping

5. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

6. what can you buy from us?
Engineering & Construction Machinery, Metal forming equipment, agricultural machinery, Garden machinery, construction machinery

7. why should you buy from us not from other suppliers?
The company is mainly in industrial processing and manufacturing. It is an entity factory integrating R & D, production, and sales. It has 12 years of design and R & D experience and currently has 15 R & D engineers.

Why Choose Us

1. 24-hour online service, Chinese, English, Spanish, French, German, and Russian support, and technical guidance.

2. When meets machine failure problem, our factory will ensure that the problem is solved within 1 hour.

3. Provide machine install video.

4. Provide logistics information, like shipping by sea, shipping by express DHL, FEDEX delivery, and real-time tracking service.

5. If the machine is broken, Non-human causes, the new device will be provided or new parts will be provided.