| Code name of width | 3015 |
| Maximum material width (mm) | 3000×1500 |
| X axis travel (mm) | 1520 |
| Y axis travel (mm) | 3020 |
| Z axis travel (mm) | 80 |
| X/Y axis positioning accuracy | ±0.05mm/m |
| X/Y axis repeat positioning accuracy | ≤0.04mm |
| Maximum positioning speed | 140m/min |
| Maximum acceleration | 1.2G |
| Slit width | 0.1-0.5mm(Measured value below 3mm thickness) |
| Incision roughness | Ra3.2-Ra25.4(Measured value below 3mm thickness) |
| Maximum cutting thickness range | Refer to the craft parameter table |
| Minimum setting unit | 0.001mm |
| Floor area of machine tool (mm) | 6000×3000 |
| Host volume (mm) | 4850*2250*1700 |
| CNC system | CypCut |
| Monitor | 19″LCD |
| Transfer method | Gear rack dual drive |
| Maximum load-bearing capacity of worktable (tons) | 1 |
| Machine weight (tons) | 3 |
| Total installed power consumption (approximately) | Laser power:1000W | 17kW |
| Laser power:1500W | 19.5kW |
| Laser power:2000W | 22kW |
| Power requirements | AC380V,50Hz;3P+N+PE |
| Total power protection level | IP54 |
Complaint
