0-30 Meter 9v Battery 14mm Probe Water Level Sensor Liquid Water Level Meters Dip Meter Water level meters are used to measure the depth of water in wells, boreholes, and standpipes. Our Electronic Water level Meters Series use sound waves to measure the water level. The sound waves are sent from a transmitter to a receiver. The time it takes for the sound waves or ultrasonic waves to travel from the transmitter to the receiver is then used to calculate the water level.
| Water Meter Level | Specification |
| Depth Of Measure | 0-100m |
| Resolution | 0.5mm |
| Response Indication | ≤1mm |
| Repeat Indication | ±2mm |
| Working Temperature | -20 ºC - +60ºC |
| Reel Material | Plastic or Metal |
| Signal | LED, Buzzer, Electrical Meter |
| Reel Color (Option) | Black, Blue, Yellow and Red |
| Probe Diameter | 14mm |
| Quality Standard | comply with the dam safety monitoring technology standard (SL60-94) |
| Tape Length ( Option) | If 30 m length not suitable to you, we can have 0-30m,0-50m, 0-150m, 0-200m, 0-300m for your choice. |
Product StructureWater Level Meter Structure
1.This is to fix the reel panel
2. Probe, probe diameter is 14mm, when it detect water, the led light on and buzzer buzzing.
3. Reel (Color Option: Yellow, Blue, Black, Or Red)
4. Led light, when probe contact water, light on
5. Buzzer, when probe contact water, buzzing
6.Power voltage, this show the battery power
7. Button
8. Battery case: 9V battery is necessary to put inside(order shipment without battery)
9. Support, material is metal
The measurement of the water level by the following two parts: 1. Underground material, it is composed by water level pipe and bottom cover (not include in the system,it is need purchased separately) Ground receiver-ruler water level meter, it is composed by detect head, ruler cable, receiver system and cable reel. Detect head: made by steel, inside is a water resistance contact point. When the contact point contact water, the receiver system will open, and when the contact point leave the water,the receiver system will close. Ruler cable: it made by ruler and cable, and use plastic technology keep them together, and avoid the steel corrosion and simple the operation,make the read more convenient and accurate. Receiver system:it is composed by sounder,indicate light. 2 the green button in the panel is test button, hewn push this button, light on and buzzing, that indicate the circuit is in good condition. Or else, the circuit have problem or the battery has no power.
Maintenance
Because the system use battery to supply power, so when you finish test,you should keep it power off.Power supply is 9V,when it has no power,you should open the cover and change it. After measurement, please keep the detect head and cable clean, cable rolled in cable reel. And put them in a good condition. Unauthorized disassembly of the product, it can not put in water horizontally, the cable cannot bucking,especially the ends. The detect head should carry and put softly and avoid vibration.
Storage
Customer should open the box and check the product when you receive it.
Storage temperature-10~+40ºC,humidity less than80%,no aggressive gas.
Product warranty:1year.
How to Use Our Water Level Meter
To measure the water level, follow these steps:
1. Rotate the cable reel and press the power button.
2. Place the probe into the underground water pipe
3. Hold the ruler cable in your hand and slowly lower it into the pipe.
4. When the probe contacts the water, the receiver system's buzzer will sound. If the surrounding noise is too loud to hear the buzzer, you can observe the indicator light and voltage meter instead. If the light and buzzer don't turn on, there may be a problem with the circuit or battery.
1.Provide an accurate method of measuring water level.Usually used for measuring Wells, drilling and water pipe water.
2.Good physical and chemical properties, oil resistance, chemical corrosion resistance, abrasion resistance,
3.resistance to hydrolysis and microbial resistance;good low temperature performance, working temperature 40 ºC to + 90 ºC.
1.What's the price of the steel ruler cable?
The price depended on the length and quantity that ypu need.
2.Can I get a free sample to see the quality of steel ruler cable?
Yes, the sample is available.
But sample is not free as the high value of steel ruler cable..
You need to pay both the samples's fee and the shipping cost.
3.How long can I get the water level meter after I paid?
Usually the lead time is 3 days.
4.Which payment way that you support for the water level meter?
Our company support TT/WEST UNION/PAYPAL/AlLIBABA CREDIT GUARANTEE ORDER
5. MOQ
1pc
6.Co you ensure the water level meter work normally before the delivery?
Yes, we can ensure it work normally as we will test it before we send the steel ruler cable.
7.What's the shipment way provided for the water level meter?
Depending on your need.The air/sea/railway all works for us.
Complaint
