Rg Machinery Skid Steer Loader Price for USA/Sales/Hire/Garden/Farm with CE EPA

Min.Order: 1
Product origin: Linyi, Shandong, China
Infringement complaint: complaintComplaint
US$ 14999 ~ 19999

Description
Product Description

RG Machinery Skid Steer Loader Price for USA/Sales/Hire/Garden/Farm with CE EPA


 
Detailed Photos

Product Parameters


PARAMETERRG525
(Metric Units)
RG525
(US Units)
DIMENSIONSParameterParameter
A. Angle of Departure19°19°
B. Carry Position206 mm8 in
C. Dump Angle @ Maximum Height36°36°
D. Dump Height with Standard 49.2" Bucket1272 mm50 in
E. Dump Reach @ Maximum Height815 mm32 in
F. Ground Clearance159 mm6 in
G. Ground Clearance(Under Platform)180 mm7 in
H. Height to Bucket Hinge Pin1883 mm74 in
I. Height1352 mm53 in
J. Length without Attachment1976 mm78 in
K.Length with Standard Bucket2637 mm104 in
L. Operating Height2649 mm104 in
M. Rollback @Carry Position22°22°
N. Rollback Fully Raised 
  @ Maximum Height
94°94°
O. Ground Contact Length918 mm36 in
P. Turning Radius with Standard 49.2" Bucket1593 mm63 in
Q. Machine Width1104 mm43 in
R. Wheel Tread (over tracks)904 mm36 in
S. Width with Standard 49.2" Bucket1250 mm49 in
RG525
PERFORMANCEParameter
Operating Capacity (35%)291 kgs / 642 lbs
Operating Capacity (50%)416 kgs / 917 lbs
Tipping Capacity832 kgs / 1834 lbs
Max. Travel Speed5.6 km/h (3.5 mph)
Machine Weight 
(no attachment)
1060 kgs / 2336 lbs
Standard Bucket49.2" Bucket: 90 kgs(198 lbs) / 0.2 cbm(7 ft³)
ENGINE/ELECTRICALParameter
Make/ModelKubota D1105
(EU Stage 3rd B / EPA Tier 4 Final)
Fuel/CoolingDiesel/Liquid
Horsepower (SAE Gross)18.5 kW / 25.2HP
Maximum Governed RPM3000 RPM
Torque71.5 Nm @2200 RPM(SAE Net)
Number of Cylinders3
Displacement1.123 L (68.5 ft³)
Bore/Stroke78 mm(3.1in) / 78.4 mm(3.1in)
Fuel Consumption6.1 L/h
LubricationGear Pump Pressure
Crankcase VentilationClosed
Air CleanerDry replaceable cartridge with safety element
IgnitionDiesel-Compression
Engine CoolantPropylene glycol/water mix (53%-47%) with freeze protection to -37°C
Starting AidGlow plugs
AlternatorBelt Driven; 40 amps; Open
Starter12 volt; Gear Reduction Type; 1.4 kW
Battery12 V; 45 Ah
HYDRAULIC SYSTEMParameter
Pump TypeEngine driven, Two Gear type
Pump Capacity53.1 L/min@ 3000 RPM
14 gpm@ 3000 RPM
Pump 1 flow33.9 L/min (8.95 gpm)
Pump 2 flow19.2 L/min (5.07 gpm)
Main Control Valve1 set; 5-Spool, open center series parallel configuration
Auxiliary Control Valve1 set; 2-Spool, open center series parallel configuration
Hydraulic FilterReplaceable 10 micron filtration
Hydraulic CylindersDouble-acting
Lift Cylinder
Bore*Rod *Stroke
45*25*295 mm
Tilt Cylinder
Bore*Rod *Stroke
55*30*280 mm
Telescoping Cylinder
Bore*Rod *Stroke
/
Hose Quick Couplers1 set: On operator's right hand side, drive  attachment with cylinder;
1 set: On operator's left hand side, drive  attachment with motor, even with hydraulic flow return;
System Relief @ Quick Couplers210 Bar (3046 psi)
Hydraulic Function TimesHydraulic Function Times
Raise Lift Arms3.5 Seconds
Lower Lift Arms2.4 Seconds
Bucket Dump2.5 Seconds
Bucket Rollback1.8 Seconds
DRIVE SYSTEMParameter
Main DriveRight Hydraulic Motor drives right side track
Left Hydraulic Motor drives left side track
TransmissionDirect drive of hydraulic motor to main undercarriage drive sprocket
Tracks200 mm wide
Rollers3 Each side
Prssure to the Ground25.3 kPa/0.253 Bar/3.67 psi
CAPACITIESParameter
Cooling System5.2 L (1.37 gal)
Engine Oil with Filter5.1 L (1.34 gal)
Fuel Tank35 L (9.24 gal)
Hydraulic Reservoir34 L (8.98 gal)
Hydraulic System40 L (10.6 gal)
CONTROLSParameter
Engine Starting AidPower main switch on right side of Machine.
Preheating function in cold weather.
Key-type starter switch and shutdown;
Glow Plugs - Activated by key switch.
Engine Power OutputTurn right or left, Push or Pull by a red throttle button.
Hydraulic Flow ShareShare hydraulic flow by a throttle button between driving tracks and working auxiliary
Skid Direction and SpeedDirection and speed controlled by two handles
(Each handle controls the same side drive motor direction and speed)
Arms Lift & Tilt
(rear or front direction and flow)
Front Auxiliary Quich Change Plate
(right or left drection and flow)
Controlled by one hand lever
Travel Speed StageFaster or slower gears positioned by a hand lever
Auxiliary Pressure ReleaseFore and aft movement of hand lever(right side) after engine has been shutting off.
Service Brake/
Parking Brake/

Related:




Packaging & Shipping

FAQ

 

1. who are we?
We are based in Shandong, China, start from 2011,sell to North America(30.00%),Domestic Market(29.00%),South America(15.00%),Oceania(14.00%),Eastern Europe(4.00%),South Asia(3.00%),Southeast Asia(3.00%),Africa(2.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Mini Skid Steer Loader and Attachments
4. why should you buy from us not from other suppliers?
Compact utility mini skid steer loader, had exported to America, Australia, New Zealand,North Europe, and South Africa etc more than 40 countries.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DAF;
Accepted Payment Currency:USD,EUR,AUD,HKD,CNY;
Accepted Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,German,French,Russian,Korean




Product Tag:
Related categories:
Scroll to Top