Complaint
Series VT 3 port, direct operated poppet valves are compact in size, yet provide large flow capacity, and low power consumption. The series is suitable for use in vacuum applications.
Product Feature
Series VT 3 port, direct operated poppet valves are compact in size, yet provide large flow capacity, and low power consumption. The series is suitable for use in vacuum applications. The VT valve is a single valve with 6 functions (universal porting type) such as N.C. valve, N.O. valve, divider valve, selector valve, etc. The manifold style valve, series VO, can be easily converted from N.C. (normally closed) to N.O. (normally open) by merely turning over the switch cover.
| Type of actuation | Direct operated type 2 position single solenoid | ||
| Working medium | Air | ||
| Working pressure | 0 to 1 MPa (High-pressure type), 0 to 0.7 MPa (Standard type) | ||
| Working temperature | -10 to 50°C (No freezing) | ||
| Response time*1) | 20 ms or less (at 0.5 MPa) | ||
| Max. operating frequency | 10 Hz | ||
| Lubrication | Not required (Use turbine oil Class 1 lSO VG32, if lubricated.) | ||
| Manual override | Push type (Non-locking) | ||
| Mounting orientation | Unrestricted | ||
| Impact/Vibration resistance*2) | 150/50 m/s² | ||
| Enclosure | Dustproof | ||
| lectrical entry | Grommet, DIN terminal | ||
| Coil rated voltage | AC (50/60 Hz) | 100V, 200V, 110V*, 220V*, 240V* | |
| DC | 24V, 12V* | ||
| Allowable voltage fluctuation | -15 to +10% of rated voltage | ||
| Apparent power*3, *4) | AC | Inrush | 12.7 VA (50 Hz), 10.7 VA (60 Hz) |
| DC | Holding | 7.6 VA (50 Hz), 5.4 VA (60 Hz) | |
| Power consumption*3, *4) | DC | Without indicator light: 4 W, With indicator light: 4.2 W | |
| Light/Surge voltage suppressor (DIN terminal type only) | AC | Varistor, LED | |
| DC | Diode, LED | ||
* Semi-standard.
*1) Based on dynamic performance test, JIS B 8419: 2010. (Coil temperature: 20°C, at rated voltage, without surge voltage suppressor)
*2) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 1000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period)
*3) At rated voltage.
*4) The value is different for continuous duty type (VT307E), and energy-saving type (VT307Y/W). Refer to "Valve Options" shown below. Make sure that dust and/or other foreign materials do not enter the valve from the unused port (e.g. exhaust port).
| Valve model | Port size | Flow Rate Characteristics | ||
| VT307 VT307V (Vacuum spec. type) | 1/8 | 1→2 (P→A) | C [dm³/(s·bar)] | 0.71 |
| b | 0.35 | |||
| Cv | 0.18 | |||
| 2→3 (A→R) | C [dm³/(s·bar)] | 0.68 | ||
| b | 0.27 | |||
| Cv | 0.17 | |||
| 3→2 (R→A) | C [dm³/(s·bar)] | 0.65 | ||
| b | 0.36 | |||
| Cv | 0.17 | |||
| 2→1 (A→P) | C [dm³/(s·bar)] | 0.63 | ||
| b | 0.35 | |||
| Cv | 0.17 | |||
| VT307E (Continuous duty type) VT307Y(Energy-saving type) VT307W(Energy-saving, Vacuum spec. type) | 1/8 | 1→2 (P→A) | C [dm³/(s·bar)] | 0.41 |
| b | 0.26 | |||
| Cv | 0.1 | |||
| 2→3 (A→R) | C [dm³/(s·bar)] | 0.44 | ||
| b | 0.35 | |||
| Cv | 0.11 | |||
| 3→2 (R→A) | C [dm³/(s·bar)] | 0.48 | ||
| b | 0.27 | |||
| Cv | 0.12 | |||
| 2→1 (A→P) | C [dm³/(s·bar)] | 0.35 | ||
| b | 0.33 | |||
| Cv | 0.1 | |||
| VT307 VT307V (Vacuum spec. type) | 1/4 | 1→2 (P→A) | C [dm³/(s·bar)] | 0.71 |
| b | 0.31 | |||
| Cv | 0.19 | |||
| 2→3 (A→R) | C [dm³/(s·bar)] | 0.71 | ||
| b | 0.25 | |||
| Cv | 0.17 | |||
| 3→2 (R→A) | C [dm³/(s·bar)] | 0.68 | ||
| b | 0.33 | |||
| Cv | 0.17 | |||
| 2→1 (A→P) | C [dm³/(s·bar)] | 0.71 | ||
| b | 0.26 | |||
| Cv | 0.18 | |||
| VT307E (Continuous duty type) VT307Y (Energy-saving type) VT307W (Energy-saving, Vacuum spec. type) | 1/4 | 1→2 (P→A) | C [dm³/(s·bar)] | 0.49 |
| b | 0.2 | |||
| Cv | 0.12 | |||
| 2→3 (A→R) | C [dm³/(s·bar)] | 0.44 | ||
| b | 0.34 | |||
| Cv | 0.11 | |||
| 3→2 (R→A) | C [dm³/(s·bar)] | 0.48 | ||
| b | 0.17 | |||
| Cv | 0.12 | |||
| 2→1 (A→P) | C [dm³/(s·bar)] | 0.46 | ||
| b | 0.28 | |||
| Cv | 0.11 | |||
Exclusive use of VT307E is recommended for continuous duty with long time loading.
Caution:
1. This model is for continuous duty, not for high cycle rates. But even in low cycle rates, if energizing the valve more than once a day, please consult with VPC.
2. Energizing solenoid should be done at least once in 30 days.
Specifications different from standard are as follows.
| Apparent power/AC | Inrush | 7.9 VA (50 Hz), 6.2 VA (60 Hz) |
| Holding | 5.8 VA (50 Hz), 3.5 VA (60 Hz) | |
| Power consumption/DC | 1.8 W, With indicator light: 2 W | |
| Response time* | 30 ms or less (at 0.5 MPa) | |
Energy-saving type: VT307Y (VT307W)
If low power consumption is required for electronic control, "VT307Y(W)" (1.8 W) is recommended. Specifications different from standard are as follows.
| Power consumption/DC | 1.8 W, With indicator light: 2 W |
| Response time* | 25 ms or less (at 0.5 MPa) |
Vacuum spec. type: VT307V (VT307W)
This vacuum model has less air leakage than the standard model under low pressure. It is recommended for vacuum application.
| Operating pressure range | -101.2 kPa to 0.1 MPa |
VT307→ Body type | T: Body ported | O: For manifold | |||||
Nil1→ Valve option | Nil: Standard type | E*: Continuous duty type | Y*: Energy-saving type | ||||
V*: Vacuum specification type | W*: Energy-saving type, Vacuum specifification type | ||||||
*Semi-standard. | |||||||
Nil2→ Pressure specifications | Nil: Standard type(0.7 MPa) | K*: High-pressure type(1 MPa) | |||||
*Semi-standard. | |||||||
5→ Rated voltage | Rated voltage/Valve option | Nil | E | Y | V | W | |
1 | AC100 V, 50/60 Hz | √ | √ | - | √ | - | |
2 | AC200 V, 50/60 Hz | √ | √ | - | √ | - | |
3* | AC110 V, 50/60 Hz | √ | √ | - | √ | - | |
4* | AC220 V, 50/60 Hz | √ | √ | - | √ | - | |
5 | DC24 V | √ | √ | √ | √ | √ | |
6* | DC12 V | √ | √ | √ | √ | √ | |
7* | AC240 V, 50/60 Hz | √ | √ | - | √ | - | |
*Semi-standard. | |||||||
G→ Electrical entry | Grommet | G: 300 mm lead wire | H: 600 mm lead wire | ||||
DIN terminal | D: With connector | DO: Without connector | |||||
Nil3→ Light/Surge voltage suppressor | Nil: None | ||||||
S: With surge voltage suppressor(Grommet type only) | |||||||
Z:With light/surge voltage suppressor(DIN terminal type only) | |||||||
01→ Port size | Nil: Without port(For manifold) | 01: 1/8 (6A) | 02: 1/4 (8A) | ||||
Nil4→ Thread type | Nil: Rc | F: G | N: NPT | T: NPTF | |||
F→ Bracket | Nil: None | F: With bracket | |||||
Nil5→ CE-compliant | Nil: None | Q: CE-compliant* | |||||
* Electrical entry and light/surge voltage suppressor: D/DO/DZ/DOZ only | |||||||
| VPC Box | White Box | Color Box | VPC Carton | Pallet |
Delivery time:
| conventional products | customized products | specially customized products |
| on the day of payment | 10 workdays | 25 workdays. |
Payment term:
| Paypal | TT | Western Union | DP | LC | Money Gram | Online Bank | Alibaba credit order | Pay later | DA |
| YES | YES | YES | NO | NO | YES | YES | YES | YES | YES |
Transportation:
Express(DHL, UPS, TNT, JCEX, FEDEX) is available.
Sea and Air transports are available.
The most suitable transport way will be chosen for you.
Q1:What is your quality assurance?
A:We will inspect one by one before delivery.If the product is damaged in transit or has quality problems, you can choose to refund or resend the product, and the freight will be borne by us.
Q2:What is your terms of payment?
A: TT ,We'll show you the photos of the products and packages before you pay the balance.
B: Paypal payment, Bank transfer,Alibaba Trade Assurance order also available.
Q3: How about the lead time?
A: Normally it will take 3-7 days for our routine products.
Q4:What is your sample policy?
A: Some free samples can be offered if you contact us.
Q5:How about the warranty?
A: 1 year warranty.
