Fuhong injection molding machine Features:
control system:
*Multiple languages available
*Manual,semi-automatic,full automatic mode
*Can provide EUROMAP robot interface.
*Automatic movement monitoring with alarm and fault diagnosis.
*Function of slope setting can set the start and stop of movements,so as ensure the smooth movement.
Hydraulic system:
*The manual plug valve hydraulic system make the machine having quick and smooth motion response
*double proportional valve control pressure and flow
*Hydraulic oil cooling device
*High-performance imported hydraulic unit with optimizing allocation
*The fuel tank has a big opening hole so can be cleaned easily.
Injection system:
*APID temperature control,precise temperature control of barrel.
*There are three or four size of screw&barrel.with optinal design,respectively,nitride,hard plating,dual-metal,which is suitable for different processes of a variety of plastics,and the choice of product.
*double -guided bar supports,double-balanced rapid injection
*The high-torque hydraulic motors offer a stable plasticizing capacity,high-precision electronic device position detection enable accurate measurement.
Clamping system:
*Security doors fitted ithhydraulic,mechanical and electrical interlocking triple safety device when the safety door is open,the machinecannot clamp.
*Low pressure mold protection device to prevent damage of platen.
*Plywood,frame,the bridge,and the template attached structure,the finite element analysis.
*Hydraulic ejector,adjustable stroke,and top speed of ejector in and out,for multiple actions.
*Flexible tie bar nut eliminates fatigue fracture,assure the working life of the tie bars.
*Automatic adjustment.The replacement of different molds,the parameters set by clamping force to achieve the automatic adjustment.
High-precision electronic detection device,multi-stage contrl of opening stroke,speed and location,location accuracy.
ITEM | UNIT | FHG240 | |||
Injection Unit | Screw Diameter | mm | 50 | 52 | 55 |
Screw L/D Ratio | L/D | 21 | 20.2 | 19.1 | |
Injection Volume | cm3 | 481 | 520 | 582 | |
Shot Weight | g | 437 | 473 | 530 | |
Injection Speed | g/s | 148 | 160 | 180 | |
Injection Pressure | Mpa | 204 | 189 | 169 | |
Screw speed | r/min | 0-180 | |||
Clamping Unit | Clamping Force | KN | 2400 | ||
Opening Stroke | mm | 480 | |||
Mould Thickness(Min-Max) | mm | 200-550 | |||
Space Between Tie-Bars | mm | 530×530 | |||
Ejector Stroke | mm | 130 | |||
Ejector Force | KN | 65 | |||
Others | Pump Pressure | Mpa | 16 | ||
Motor Power | KW | 18.5 | |||
Heating Power | KW | 13.5 | |||
Machine Dimension | m | 5.6×1.5×2.2 | |||
Machine Weight | Ton | 7 |