1.The machine tool control system adopts SYNTEC system, and other CNC systems are optional.
2.The machine model is capable of 4-axis linkage with dual spindles for simultaneous processing.
Design with dual spindles and dual turrets, under the control of a multi-axis, multi-channel CNC system and post-processing programs, it not only achieves 4-axis linkage processing but also enables automatic part flipping, simultaneous rough and finish turning. It possesses a range of multifunctional capabilities, such as two-spindle processes without interference.
3.Configured with 2 sets of feed axes.
In the highest configuration of this series, there are two sets of X, Y, Z feed axes. Both sets of Y axes feature a rigid rail orthogonal Y-axis structure, providing the machine tool with sufficient milling capabilities.
4.Low resonance, high precision
When the equipment is processing bidirectionally simultaneously, the maximum resonance value is less than 5%, demonstrating outstanding performance. The static docking precision of the dual spindles can reach 0.005mm, and the synchronized docking precision can reach 0.01mm, meeting the requirements of most customers.
5.Modular, Flexible Configuration
To meet market demands, this structure features a modular design, allowing flexible configurations based on specific requirements.
Parameter | Unit | TS-8/6ZYD/D | ||||
1 | Max. Turning Diameter | mm | Φ200 | |||
2 | Max. Machining Length | mm | 550 | |||
3 | Max. Swing Diameter | mm | Φ200 | |||
4 | Max. Bar Through Diameter | mm | Φ51 | |||
5 | Spindle Bore (This parameter is for reference only. For specific parameters, please contact the technical support department) | mm | 1st Spindle: Φ68; 2nd Spindle: Φ56 | |||
6 | Max. Spindle Speed | RPM | 1st Spindle: 3500; 2nd Spindle: 4000 | |||
7 | X-axis Travel | mm | X1: 250 | X2: 250 | ||
8 | Y-axis Travel | mm | Y1: 90 | Y2: 90 | ||
9 | Z-axis Travel | mm | Z1: 600 | Z2: 600 | ||
10 | B-axis (Tailstock) Travel | mm | 550 | |||
11 | Rapid Feedrate | m/min | 22 | |||
12 | Max. Driven Tool Speed | RPM | 4000 | |||
13 | Voltage (3 phase) | V | 380±10% | |||
14 | Electric frequency | Hz | 50 | |||
15 | Rated Power of the Motor | kW | 42 | |||
16 | Weight | kg | 6000 | |||
17 | Size (Length × Width × Height) | mm | 3000 × 2300 × 2100 | |||
\ | Configuration Table | |||||
1 | CNC | FANUC 0I-TF PLUS(5) | SYNTEC 22TB | |||
C1-axis Rated Power/Torque of the Servo Motor | 11-15kW/105Nm | 15kW/98Nm | ||||
C2-axis Rated Power/Torque of the Servo Motor | 7.5kW/35.8Nm | 7.5kW/36Nm | ||||
X1-axis Rated Power/Torque of the Servo Motor | 1.8kW/11Nm | 2.4kW/11.5Nm | ||||
X2-axis Rated Power/Torque of the Servo Motor | 1.8kW/11Nm | 2.4kW/11.5Nm | ||||
Y1-axis Rated Power/Torque of the Servo Motor | 1.8kW/11Nm | 2.4kW/11.5Nm | ||||
Y2-axis Rated Power/Torque of the Servo Motor | 1.8kW/11Nm | 2.4kW/11.5Nm | ||||
Z1-axis Rated Power/Torque of the Servo Motor | 1.8kW/11Nm | 2.4kW/11.5Nm | ||||
Z2-axis Rated Power/Torque of the Servo Motor | 1.8kW/11Nm | 2.4kW/11.5Nm | ||||
B-axis Rated Power/Torque of the Servo Motor | 2.7kW/12Nm | 3.1kW/15Nm | ||||
Driven Tool Rated Power/Torque of the Servo Motor | 2.7kW/12Nm | 3.1kW/15Nm | ||||
2 | \ | Brand | Type/Spec | |||
1st Spindle | Guangzhou HAOZHI Mechanical Spindle (Standard) Taiwan KENTURN Mechanical Spindle (Optional) | A2-6 (Belt-driven) | ||||
2nd Spindle | Guangzhou HAOZHI Mechanical Spindle (Standard) Taiwan KENTURN Mechanical Spindle (Optional) | A2-5 (Belt-driven) | ||||
3 | X1-axis | Linear Guide Rail | HIWIN / PMI / NSK | 35 Roller Guide | ||
Lead Screw | HIWIN / PMI / NSK | 32 | ||||
Bearing | NSK | 20TAC | ||||
X2-axis | Linear Guide Rail | HIWIN / PMI / NSK | 35 Roller Guide | |||
Lead Screw | HIWIN / PMI / NSK | 32 | ||||
Bearing | NSK | 20TAC | ||||
Y1-axis | Guide Rail | \ | 50 Hard Guide | |||
Lead Screw | HIWIN / PMI / NSK | 32 | ||||
Bearing | NSK | 25TAC | ||||
Y2-axis | Guide Rail | \ | 50 Hard Guide | |||
Lead Screw | HIWIN / PMI / NSK | 32 | ||||
Bearing | NSK | 25TAC | ||||
Z1-axis | Linear Guide Rail | HIWIN / PMI / NSK | 35 Roller Guide | |||
Lead Screw | HIWIN / PMI / NSK | 32 | ||||
Bearing | NSK | 20TAC | ||||
Z2-axis | Linear Guide Rail | HIWIN / PMI / NSK | 35 Roller Guide | |||
Lead Screw | HIWIN / PMI / NSK | 32 | ||||
Bearing | NSK | 20TAC | ||||
B-axis | Linear Guide Rail | HIWIN / PMI / NSK | 35 Roller Guide | |||
Lead Screw | HIWIN / PMI / NSK | 32 | ||||
Bearing | NSK | 20TAC | ||||
4 | Tool Carrier Form | Driven Tool Turret | Brand | Taiwan TCSM | ||
Driving Type | Servo Motor | |||||
Locking Type | Hydraulic Locking | |||||
Model / Station | BMT55-12 (Standard) BMT45-15 (Optional) | |||||
5 | Tailstock Form | Sub-Spindle | ||||
6 | Lubrication Form | Oil Lubrication | ||||
7 | Hydraulic System | 10 Channels | ||||
8 | Fixture | Hydraulic Chuck (1st: 8 inch ; 2nd: 6 inch) | ||||
9 | Coolant Pump Pressure/Power | Type | Spec | Qty | ||
Machining Water Punp | 5Bar/700W (Standard) 20Bar/3300W (Optional) 40Bar/5500W (Optional) | 2pcs | ||||
Chip Flushing Pump | 2Bar/370W | 1pcs | ||||
10 | Chip Conveyor | Standard | ||||
11 | FixedTool Holder | Type | Spec | Qty | ||
Boring Tool Holder | 14 Included for Any Type (extra available) | |||||
Outer Diameter Turning Tool Holder | ||||||
End Face Turning Tool Holder | ||||||
Optional Available | ||||||
12 | Driven Tool Holder | Spec | Qty | |||
0° | 2pcs | |||||
90° Unidirection | \ | |||||
90° Bidirection | 2pcs | |||||
Optional Available | ||||||
13 | Other Accessories | Part name | Qty | |||
Chuck Draw Tube | 2 pcs | |||||
Foot Switch | 1 set | |||||
Water Tank | 1 set | |||||
Installation Tool | 1 set | |||||
Machine Foot | 9 pcs | |||||
14 | System Operation Manual | E-manual | ||||
15 | Machine Tool Instruction Manual | E-manual | ||||
16 | Optional | Renishaw Tool Setter | ||||
Automatic Catcher | ||||||
Oil Mist Collector |
Guangdong Longbang Intelligent Equipment Industry Co., Ltd
Q1:Where is our factory located?
A: We have two factories.One is located in Building 2ACIMC, No.15Shunye West Road, Xingtan Town, Shunde District,Foshan City,Guangdong Province (Guangdong Longbang Intelligent Equipment Industry Co., Ltd)and the other one is located in No.6 Private Industrial Village,Tanzhou North District,Dagang Town, Nansha District, Guangzhou City,Guangdong Province(Guangzhou Longbang Automation Control Equipment Co., Ltd)