Plastic Recycling Machine for PE PP Waste Film Bags Raffia

Min.Order: 1
Product origin: Suzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 45000 ~ 50000

Description

Product Description

PE LDPE HDPE LLDPE Film Recycling Pelletizing Line
Name: PE LDPE HDPE LLDPE Film Recycling Pelletizing Line
Raw materials: pre washed sheet, PE / PP printing
01 - Raw materials
02 - Technical Parameters
ModelPTCS80PTCS100PTCS130PTCS150PTCS185
Screw diameter
(mm)
80100130150185
L/D18-42
Rotating speed
(rpm)
10-150
Otput
(KG/h)
150-250200-350450-600600-700800-1200

 
 
03 - Specification Introduction
ModelPTCS Three-in-one plastic recycling machine
Final productPlastic pellets
Recycling machine structureConveyor belt, crusher, extruder, pelletizing unit, water cooling unit, drying unit and storage drum, degassing unit, filter unit
Recyclable materialsHDPE, LDPE, LLDPE, PP, BOPP, CPP, OPP, PA, PC, PS, PU, EPS
Capacity100-1200/hr
Feeding systemBelt conveyor, clamp wheel set (optional)
Screw diameter65~180mm(customized)
Screw length to diameter ratio30/1, 32/1, 34/1, 36/1 (customized)
Screw material38CrMoAl Or bimetal
Degassing holeDouble degassing hole, single degassing hole or no degassing hole (customized)
Filtering systemDouble-cylinder filtration
Pellet typeHot die-cutting type (water-ring cutting)
Cooling methodWater cooling
VoltageCustomization (for example: 480V 60Hz in the United States, 440V/220V 60Hz in Mexico, 380V 60Hz in Saudi Arabia, 415V 50Hz in Nigeria)
Optional accessoriesMetal detector (S+S Germany), wheel set, color master batch and additive meter, centrifugal dehydrator
Delivery dateIt takes 50~70 days to customize the machine.
WarrantyOne year
After-sales serviceEngineers can be dispatched to customers' overseas factories to assist in machine installation


 
05 - Features
 
 
The plastic recycling pelletizing line PTCS manufactured is specially designed to recycle PE (HDPE, LDPE, LLDPE) and PP packaging materials. Except for the clean waste (waste from the production line), the printed surface, the washed waste and the crushed small fragments, all can be recycled by PTCS. Applicable waste materials include: plastic bag factory waste, food packaging waste, all kinds of plastic bags, shrink film, bale film, agricultural film, PE&PS foam material, disposable tableware, PP wire drawing, woven bag, space bag and The crushed hollow molding and injection products can be used for recycling and pelletizing. Scope of Application of Plastic Recycling Waste The recycled plastic pellets produced by PTCS can be immediately used in the production line for re-production. It is most often used to reproduce products on blown film machines and water pipe extruders. 1. Recycled clean plastic once-waste from plastic production plants Plastic production plants (blowing factories, bag making factories, and printing factories) generate an average of 5% of the total waste output. Recently, because the prices of petroleum and new materials keep rising, the problem of recycling of waste materials in plastic factories has gradually attracted attention. Using recycled plastic materials to make products again can greatly reduce the cost of purchasing new materials. Recycling the waste produced by the production line (for example: defective film rolls, cutting ears in the bag making process), the quality of the recycled materials can be up to 98% of the new materials. Many manufacturers currently choose to use primary recycled waste to produce products, and the quality of the products produced is quite close to the products made from new materials. This method can save the cost of using raw materials and increase the market value of the product. 2. Secondary recycling waste-washing waste, plastic particles with trace impurities In response to the needs of different customer groups, PTCS machines can also be used to recycle waste after washing (waste plastic film, agricultural film, cover film for construction projects...). The heat energy generated by the rotation in the PTCS crushing process can be used to heat the waste material after washing and take away the excess water in the material. In the part of the extruder, double degassing holes can release water and printing ink again. The plastic pellets produced by washing raw materials are mostly used to reproduce plastic films used to make garbage bags, engineering films, covering cloth, and to produce water pipes. The PTCS machine can be additionally equipped with a masterbatch/additive feeder to change the color of the recovered particles. Plastic particles with trace impurities
 
 
06 - High-efficiency Plastic Recycling Pelletizing Line





Product Tag:
Related categories:
Scroll to Top