Complaint
| Gantry Type 5-Face Machining Center | |
| Model | GDLG-4030 |
| CAPACITY | |
| X-axis travel | 4,000 mm |
| Y-axis travel | 3,000 mm |
| Z-axis travel | 1,000 mm |
| Dist. form spindle nose to table top | 200 ~ 1,200 mm |
| Dist. between columns ( with water eliminator ) | 3,800 mm ( 3,500 mm ) |
| WORKING TABLE | |
| Table size ( X direction ) | 4,000 mm |
| Table size ( Y direction ) | 2,800 mm |
| Table load capacity | 2,500 kg/m² |
| SPINDLE | |
| Spindle motor ( cont. / 30 min. ) | 22 / 26 kW ( 30 / 35 HP ) |
| Spindle speed | Gear 4,000 rpm ( Std. ) ; Gear 5,000 / 6,000 rpm ( Opt. ) ; Built-in 6,000 / 8,000 rpm ( Opt. ) |
| Spindle taper | CAT50 ( 7 / 24 ) |
| FEED RATE | |
| X-axis rapid feedrate | 12 m/min. |
| Y-axis rapid feedrate | 15 m/min. |
| Z-axis rapid feedrate | 10 m/min. |
| Cutting feedrate | 10 m/min. |
| TOOL MAGAZINE | |
| Tool magazine capacity | 32 |
| Max. tool diameter / adj. pocket empty | Ø 127 / 215 mm |
| Max. tool length ( from gauge line ) | 350 mm |
| Max. tool weight | 20 kg |
| ACCURACY | |
| Positioning accuracy ( JIS B 6338 ) | ± 0.015 mm / Full Travel |
| Positioning accuracy ( VDI 3441 ) / Full Travel | P = 0.025 mm |
| Positioning accuracy ( VDI 3441 ) Y / Z axes | P = 0.025 mm / Full Travel |
| Repeatability ( JIS B 6338 ) | ± 0.003 mm |
| Repeatability ( VDI 3441 ) | Ps = 0.018 mm |
| Repeatability ( VDI 3441 ) Y / Z axes | Ps = 0.020 mm |
| GENERAL | |
| Power requirement | 220 ± 10 % |
| Pneumatic pressure requirement | 5 ~ 8 kg/cm² |
| Hydraulic unit tank capacity | 120 liter |
| Lubrication oil tank capacity | 6 liter |
| Coolant tank capacity | 1,100 liter |
