Description
Product Description
PVDF series filter cartridge is constructed of imported natural hydrophobic polyvinylenedifluoride (PVDF) membrane media and non-woven support materials. Adaptors are thermally welded with media without using any glue on it, so there is no possibilities to cause.
Applications
Large-scale fermenter air
Intermediate product vessel venting
Autoclave vacuum break
Instrument air
Air and gas service lines
Features
Excellent performance of high temperature-resistance, repeated steam in-situ
Hydrophobic membrane with high flow
Low pressure drop, high flow rate, long service life
100% intefrity tested
Specifications
Dimensions
Outside diameter: 2.7" (69mm)
Length: 9.75", 10", 20", 30", 40"
Material of Constructions
Filter media: PVDF membrane
Support layer: PP
Cage/Core/End cap: PP
Seal Mterial: Silicone, EPDM, NBR, Viton, Teflon, E-FKM
Performance
Removal Rating: 0.22μ M, 0.45μ M
Maximum operating Temperature: 90° C
Maximum differential pressure(forward): 4.2bar at 25° C
Maximum differential pressure(reverse): 2.0Bar at 25° C
Maximum temperature sterilization: 121° C, 30Minutes, 100times.
Part Numbers/Ordering Information
Darlly Micro Pleated Filter Cartridge P/N:
DLMPVDF-*-=-+(e. G, DLMPVDF-5-10-E-B)
Code* Removal Rating Code# End Cap Type Code+ Seal Material |
| 0.22 | 0.22μ m | B | DOE Gasket/Gasket(9.75" increments) | S | Silicone |
| 0.45 | 0.45μ m | F | DOE Gasket/Gasket(10" increments) | E | EPDM |
| 1 | 1μ m | H | 213/Flat | B | NBR |
| 3 | 3μ m | J | 222/Flat/SS | V | Viton |
| 5 | 5μ m | K | 222/Fin/SS | T | Teflon |
| 10 | 10μ m | M | 222/Flat | F | E-FKM |
| 20 | 20μ m | P | 222/Fin |
| 50 | 50μ m | Q | 226/Fin |
| Code= Length | R | 226/Fin/SS |
| 9.75 | 9.75" | T | 226/Flat |
| 10 | 10" | V | 226/Flat/ss |
| 20 | 20" |
| 30 | 30" |
| 40 | 40" |
Complaint
