Complaint
Nonwoven Production Line Non woven Making Machine with CE Manufacture bale opener bale breaker non-woven machine
1. Characteristic
a. Q235-A steel plates are cut by laser cutting machine and bent by computer for machine frame.
b. The spiked lattice is made of high quality engineering plastic bar with wood interlining and controlled the space of bars exactly. Leakage-proof structure with stripped canvas is used between the curtain rods.
c. Conveying lattice is made of two sub-section wooden lattices in high and low dislocation arrangement.
d. The diameter of the fiber average roller and fiber stripping roller are 480mm including the height of the spikes and there are 3 rows in total.
e. Feeding is controlled by photo electric automatically and the Spike lattice is controlled by separate inverter to control the feeding amount.
f. Hoppers are made from Aluminum alloy, controlled by air cylinders. Electrical weighing with automatic memory adjustment function (10 Settings); The weighing is very accurate.
g. One of them is fully enclosed bale opener, equipped with condenser. Edge material suction into the closed bale opener; one is a three-roll bale opener.
h. The feeding inlet of the bale opener shall be equipped with cable switch, and the escalator with protective ring shall lead to the top. All motors on the bale opener shall be equipped with protective cover, including the top motor.
2. Application
This machine is used to pre-open bale-packed fiber, and then transfer the fiber to the next working procedure according to a certainty percentage, with electronic weighing system.
This machine plays an important role in raw material proportioning. The feeding amount can be set and it can be used in a group.
3. Main performance parameters
a. Production capacity: >300kg/h (6D first class polyester)
b. Working width: 1400mm
c. Weighting scope: 0-5kg
d. Pressure of air-cylinder: 0.4-0.6MPa
e. Size: 6268×2100×2716mm(length*width*height)
f. Installed power:5.99kw
g. Weight: 2.6ton
