Chorus Syntholube Drum, IBC-Tank, ISO-Tank Pma Type Polymethacrylate Viscosity Improver

Min.Order: 1
Product origin: Zhengzhou, Henan, China
Infringement complaint: complaintComplaint
US$ 3000 ~ 4000

Description
Product Introduction
T602HC is a PMA viscosity index improver, suitable for the formulating of hydraulic oil (especially low temperature hydraulic oil), gear oil, air compressor oil, shock absorber oil, etc. It has excellent shear stability, can effectively increase the viscosity index of oil and improve the low temperature performance of oil. It can formulate various lubricant when blended with different Additive Package.

Product Technical Index
ItemTypical ValueTest Method
AppearanceTransparent viscous liquidVisual inspection
100° C kinematic viscosity, mm2/s1000GB/T 265
Color scale and number0.5GB/T 6540
Density (20°C), kg/m3920SH/T 0604
Flash point (open), °C160GB/T 3536
PSSIKRL 20h45CEC L-45-A-99
Diesel nozzle 250 cycles8SH/T 0103
Diesel nozzle 30 cycles4SH/T 0103


Performance test - Thickening Ability
The following table shows the typical kinematic viscosity @ 100ºC after T602HC added in in some viscosity grades base oil at different treat rate.
T602HC treat rate60N (KV100, cst)150N (KV100, cst)350N (KV100, cst)
02.625.018.86
5%5.599.515.62
10%9.31523.8

Performance test - Application
The following table shows the main performance of T602HC in L-HV 32 hydraulic oil compared with the leading brand PMA VII (same treat rate).
Itemleading brand PMA VIIT602HCTest Method
AppearanceTransparent viscous liquidTransparent viscous liquidVisual inspection
100°C kinematic viscosity, mm2/s7.3087.279GB/T 265
40°C kinematic viscosity, mm2/s31.8431.60GB/T 265
PSSIKRL, 20h45.344.2CEC L-45-A-99
 
Diesel nozzle 250 cycles8.48.0SH/T 0103
-24°C kinematic viscosity, mm2/s14151378GB/T 265
Pour Point, °C-42-42GB/T 3535

Performance test - Application
The following table shows the main performance of T602HC in L-HV 46 hydraulic oil compared with the leading brand PMA VII (same treat rate).
Itemleading brand PMA VIIT602HCTest Method
AppearanceTransparent viscous liquidTransparent viscous liquidVisual inspection
40°C kinematic viscosity, mm2/s45.5645.47GB/T 265
40°C viscosity dropping rate (Diesel nozzle 250 cycles)/%1.51.1SH/T 0103
-12°C kinematic viscosity, mm2/s1050985GB/T 265
Pour Point, °C-39-39GB/T 3535



Product Characteristics
• Excellent shear stability 
• Increase viscosity index effectively.
• Assist in pour-point depressing.
• A universal product with wide range of application.

Recommended Dosage
The recommended dosage for T602HC is 1%-10%wt, depending on the application. 
Please consult our additive application engineer for details.

Packing & Storage
The highest temperature of this product shall not exceed 75°C during storage, handling and oil blending. If stored for a long time, the highest temperature shall not exceed 45°C. It shall be kept away from water. This product is non-flammable, non-explosive and non-corrosive. In terms of safety, environmental protection and use, it is the same as general petroleum products without special protection. For skin contact, wash thoroughly with detergent, soap and water.
Packing: 200L standard galvanized iron drum, 170 kgs/drum net weight.

Product Tag:
Related categories:
Scroll to Top