The pressure detection method is adopted to ensure that the preset pressure can be reached every time the oil is pumped, otherwise the system will prompt an alarm
(10)Electrical parts
In addition to mechanical design, GOODA also pay great attention to electrical design. The CNC system uses a unique optical fiber communication method, which greatly increases the speed of data communication, and greatly reduces the number of wiring, making the electrical cabinet very tidy.
(11)Machine working condition
Power requirements: three-phase four-wire electronic control system 3φ380V 50HZ; Allowed fluctuation of power supply voltage: ±10%
Allowed fluctuation of power frequency: ±1%
The machine must be safely placed with a separate cable, and the grounding resistance must be less than 4 Ω.
Air source: 0.4~0.6Mpa
The ambient temperature range of the machine tool workshop is 10~35ºC, the relative humidity is 40~75%, the atmospheric pressure is 86~106Kpa, and the dust concentration in the air should not exceed 10mg/m3, and it should not contain acid, salt and corrosive gas.
The machine must be installed in a workshop far away from seismic source, heat source and heat flow, and its vibration is below 0.5G (G is the acceleration of gravity).
(12) Operation System (all specs should follow the real contract)
Operation system features:
We have been using large-board structure for the beginning, but modular structure has been adopted in new products. We use dedicated LSI to improve integration, reliability, reduce volume and reduce costs.Wide range of product applications. Each CNC device can be equipped with a variety of upper control software, suitable for a variety of machine tools.
Continuously adopt new processes and technologies. Such as surface mount technology SMT, multilayer printed circuit boards, optical fiber cables, etc.
The volume of the CNC device is reduced, and the panel-mounted, built-in PMC programmable machine tool controller is adopted
We continuously add new functions in interpolation, acceleration and deceleration, compensation, automatic programming, graphic display, communication, control and diagnosis
Interpolation function: In addition to linear, arc, and spiral interpolation, there are imaginary axis interpolation, extreme coordinate interpolation, cone interpolation, exponential function interpolation, spline interpolation, etc.
Automatic acceleration and deceleration function of cutting feed: In addition to linear acceleration and deceleration after interpolation, it also has acceleration and deceleration before interpolation.
Compensation function: In addition to pitch error compensation and screw backlash compensation, there are slope compensation linearity compensation and new tool compensation functions.
Fault diagnosis function: using artificial intelligence, the system has reasoning software, and finding the cause of the fault based on the knowledge base.
The full name of handwheel is manual pulse generator, also known as photoelectric encoder. Novel shape, easy to move, anti-interference, strong load capacity; full plastic shell, high insulation strength, anti-oil seal design; with X1, X10, X100 three-gear magnification, can realize 4-axis magnification switching; with enable switch, emergency Optional stop switch, human design, easy to operate.Main specifications and technical parameters.| specs | Unit | GDVL-650 |
| Travel |
| X-axis | mm | 600 |
| Y-axis | mm | 500 |
| Z-axis | mm | 520 |
| Distance from spindle nose to worktable | mm | 125-645 |
| Spindle center to column | mm | 550 |
| Worktable |
| Worktable size | mm | 800*500 |
| T-slot(Size*Number of slots*Spacing) | mm | 18*5*100 |
| Maximum load | Kg | 450 |
| Spindle |
| Spindle taper | | BT40 |
| Spindle speed | r.p.m | 12000 |
| Transmission type | | belt-driven/screw-driven |
| Feed |
| Cutting feed | m/min | 10/10/10 |
| Rapid feed | m/min | 48/48/48 |
| Accuracy |
| Positioning accuracy | mm | 0.005/300 |
| Re-positioning accuracy | mm | 0.003/300 |
| Tool-changing system |
| Number of Tools | Pcs | 24 |
| Max tool weight | Kg | 7 |
| Max length of tools | mm | 300 |
| Tool diameter (full tool/empty tool) | mm | 75/150 |
| Tool magazine type | | Disc type |
| Motor |
| Spindle motor power | Kw | 7.5 |
| X/Y/Z Three axis motor power | Kw | Mitsubishi:2.0/2.0/3.0
Fanuc(1.8/1.8/3.0) |
| Screw/Slide |
| Screw diameter × pitch | mm | 36×16/16/16 |
| Linear slide width | mm | X:35/Y:35/Z:35 |
| other |
| Air pressure | Kgf/cm2 | 6.5 |
| Water tank volume | L | 270 |
| Power requirement | KVA | 20 |
| Net weight(approximate) | Kg | 4500 |
| Dimensions | mm | 2200*2450*2600 |
The acceptance is carried out according to the product contract and technical agreement. According to the technical standards implemented by the product, the appearance quality, function, and geometric accuracy of the machine tool shall be checked and accepted. The samples for the work accuracy inspection shall be provided by Party B.| No. | Motor standard spec |
| 1 | Main transmission system (including AC servo main motor, spindle, etc.) |
| 2 | X, Y, Z three-axis driven system (including AC variable frequency servo motor, coupling, ball screw, linear guide, etc.) |
| 3 | Main components (including base, worktable, column, saddle, spindle stock, etc.) |
| 4 | The numerical control system includes numerical control cabinet, power module, servo module, PLC, operating unit, display, movable hand pulse generator, heat exchanger, etc. |
| 6 | Pneumatic triple |
| 7 | Automatic lubrication system (including motor, pump, distributor, etc.) |
| 8 | Cutting fluid system (including motor, pump, chip flushing device and chip storage tray) |
| 9 | X, Y, Z axis rail protection |
| 10 | Work lights and warning lights |
| 11 | Attached technical file | 1.1 A user manual
2.1 A qualification certificate
3. Packing list |
Complaint
