| Model | G-70 | CL-75NC | CL-80NC | CL-85NC | CL-100NC | CL-120NC | NEW CL-150NC | CL-150NC | CL-180NC |
| Cutting Capacity |
| Round | 10~70mm | 10~75mm | 10~80mm | 10~85mm | 30~100mm | 30~120mm | 50~150mm | 50~150mm | 70~180mm |
| Rectangle | 10~55mm | 10~58mm | 10~55mm | 10~65mm | 30~76mm | 30~80mm | 45~110mm | 50~105mm | 60~130mm |
| Round Tube | 10~70mm | 10~75mm | 10~80mm | 10~85mm | 30~100mm | 30~120mm | 45~150mm | 50~150mm | 70~180mm |
| Rectangle Tube | 10~55mm | 10~58mm | 10~55mm | 10~65mm | 30~76mm | 30~80mm | 45~110mm | 50~105mm | 70~180mm |
| Head Spindle |
| TCT Superhard Circular Saw Blade | φ285mm, T2.0mm | φ250/285mm, T2.0mm | φ285, T2.0mm | φ285/315mm, T2.0mm | φ360mm, T2.6mm | φ360/380mm, T2.6mm | φ460mm, T2.7mm | φ460mm, T2.7mm | φ560mm, T3.0mm |
| Pin Hole and Aperture | 4xφ11xPCD63xφ32 | 4xφ11xPCD63xφ32 | 4xφ11xPCD63xφ32 | 4xφ11xPCD63xφ32 | 4xφ11xPCD90xφ40 | 4xφ11xPCD90xφ40 | 4xφ11xPCD90xφ50 | 4xφ11xPCD90xφ50 | 4xφ21xPCD120xφ50 |
| Spindle Motor | 7.5KW(10HP) | 7.5KW(10HP) | 11KW(13HP) | 9.5KW(13HP) | 11KW(15HP) | 15KW(20HP) | 15KW(20HP) | 15KW(20HP) | 22.5KW(30HP) |
| Spindle Speed | 20~160rpm | 20~160rpm | 20~160rpm | 20~180rpm | 20~120rpm | 40~160rpm | 60~100rpm | 30~125rpm | 20~200rpm |
| Cut Feed Mode | AC Servo Motor+Ball Screw /Swing Feed | 30° Feed | 30° Feed | 30° Feed | Horizontal Feed |
| Main Clamp Way | Hydraulic Type/Vertical and Horizontal Clamping of Each Group |
| Saw Blade Debris Removal Device | Blade Cleanning Brush | | Power Blade Cleaning Brush |
| Gear Gap Compensation Device | Through-type Magnetic Power Brake |
| Feeding Clamps |
| Feeding Drive Mode | AC Servo Motor+Ball Screw |
| Feeding Clamp Way | Hydraulic Clamped |
| Trim Length | 10~99mm |
| Remnant Length | 65mm+α(α is less than cut off length) | 75+α | 65+α | 95+α | 95+α | 105+α |
| Single Feed Length | 6~780mm | 6~780mm | 6~780mm | 6~800mm | 10~680mm | 10~800mm | 10~800mm | 10~800mm | 10~650mm |
| Automatic Feeding |
| Device |
| Length of Material | 3000~6000mm |
| Supply Mode | Preloading/Hydraulic Lifting |
| Hydraulic Device |
| Hydraulic Drive Motor | 2.25KW | 2.25KW | 2.25KW | 2.25KW | 2.25KW | 2.25KW | 3.75KW | 3.75KW | 5.5KW |
| Hydraulic System Rated Pressure | | 7MPa |
| Hydraulic Oil Capacity | 90L | 90L | 90L | 90L | 110L | 120L | 150L | 150L | 150L |
| Cutting Fluid Cooling Device |
| Cutting Fluid Motor | 0.19KW |
| Weight & Size |
| Weight(Machine+Rack) | 3380kg | 2750kg | 2750kg | 2750kg | 3000kg | 4800kg | 5280kg | 5280kg | 6830kg |
| Size(LxW) | 7100x2600mm | 7100x2200mm | 7100x2200mm | 7100x2200mm | 6500x2450mm | 7280x3900mm | 7350x3450mm | 7350x3450mm | 7120x3720mm |
| Other Standard Equipment |
| Saw Blade Deflection Shock Device | Tungsten Carbide Parallel Block |
| Dispenser | Pneumatic, reciprocating |
| Automatic Centrialized Grease Lubrication System | Timely Quantitative Forced to the Oil |
| Blade Micro-lubrication System | Quasi-dry Intermittent Oil |
| Chip Conveyor | Chain Plate Type, Continuous or Intermittent Operation |
| LED Work Light | Waterproof and Dustproof |
| Optional Equipment |
| Electric Control Box Heat Exchanger | Closed High Efficiency Heat Exchange System |
| Centrifugal Oil Mist Recovery Machine | Multi-level Filtering, Energy Saving and Environmental |
| Cluster Feeding Device | The Whole Bundle of Materials, Long Material Cutting Preferred |
| Third Clamp | The Length of the Material 20+α (α is not enough to cut the length of a workpiece) |
| Hydraulic Blade Cleaning Brush | Active Removal of Chips |
| Long Material Discharge Device | Various Flexible Choice, including Automatic Palletizing Robot |
Complaint
