30mm DC Low Noise Front Bend Tangential Cross Flow Fan Centrifugal Blower

Min.Order: 100
Product origin: Suzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 21.98 ~ 24.31

Description

Product Description

30mm DC Low Noise Front Bend Tangential Cross Flow Fan Centrifugal Blower

PBM tangential blowers combine 30~80mm diameter cross flow impeller with one single piece length maximum to 65mm, with AC and DC power supply EC green technology motor, with aluminum die cast fan frame, with anti-vibration rubber damping pad system, with ball bearing and sleeve bearing, maximum entire tangential fan length goes up to 1190mm at single, double and triple sections harmoniously connected together makes it possible to achieve a very high airflow throughput ratio with extremely low wind noise with quiet three-core sin-wave integrated commutation electronics motor controller circuit and low air flow velocity. Cross flow blowers are available for home indoor stove, fireplace, oven, wood burner underfloor convectors, air doors, air curtains, air conditioners and heaters' cooling and ventilation at extremely shallow, flat design to satisfy home appliances' nice outlooking and slim features that market requirements and consumer calling for.
 
Low noise with high air flow rates and low back pressures, compact slim design with anti-vibration rubber mechanical soft connection system, moisture proof and water proof versions are available for entire range tangential blowers with integrated and intelligence EC technology motor with PWM signal and 0~10V analog voltage to adjust power, and ErP2015 (Energy-related Products) directive conformity.

 

Impeller Sizes:  from 30mm to 80mm diameter;

Sound Level:  from 32dBA to maximum 48dBA according different rotation speed;

Airflow:  maximum to 600CMH, Cubic Meter per Hour, equal to approx. 353CFM , Cubic Feet per Minute;

Air Pressure:  Maxim to 80Pa, equal to 8.16mm H2O and to 0.32 inches H2O;

Power:  Maximum motor input power goes to 100W motor diameter 80mm.

 

Product Parameters

General Characters:

1-1
Rated Voltage

24 VDC
 
1-2
Operating Voltage

16~28 VDC
 
1-3
Low-Start Voltage

15 VDC
 
1-4
Rated Speed

2600RPM
 
1-5
Input Current

0.17A
 
1-6
Input Power

4.08W
 
1-7
Acoustical Noise

40dB(A)
 
1-8
Life Expectance

50,000Hours(L10)
At 40ºC room, humidity 15%~65%RH
 
1-9
Direction of Rotation

Anti-clockwise
see on motor

 
1-10
Direction of Air Flow

All round
 
1-11
Insulation Class

Class B
 
1-12
Insulation Resistance

50Mega Ohm minimum at 500VDC
Between frame and (+) terminal

 
1-13
Motor Protection

Locked rotor protection
Polarity protection
Automatic restart capability

 
1-14
Speed Control

Control input 0~10VDC
 
1-15
Dielectric Strength

5mA maximum at 500VAC 50Hz five second
Between frame and (+) terminal

 
1-16
Signal Output

No
 


Mechanical Characters:

2-1Dimension

48mm X 50mm X 705mm (see dimension drawing)
 
2-2Material of Impeller

Steel
 
2-3Number of Blades

22
 
2-4Impeller Plate

Injection-moulded round sheet-metal plate
 
2-5Mounting position

Any
 
2-6Surface of Rotor

Electrophoresis
 
2-7Bearing System

NMB ball bearing
 
2-8Lead Wire

Red , Black, White AWG22#
 
2-9Weight

837g
 
2-10Package

Standard
 


Electrical Protection:

3-1
Locked-rotor Protection
Over-current limiting circuit protects motor from damage at least for 72 hours of locked rotor condition at rated voltage.
3-2
Maximum Current
under Locked Rotor
A, Typical inrush current when the motor is trying to re-start under locked rotor conditions is 2~4 times the normal running current reoccurring and for 16~20% of restarting cycle period.
B, If he CL function is used this restarting inrush current is about the same as the normal running current.
3-3
Reverse Polarity
Protection
No damage if the positive and negative leads are reversed under maximum operation voltage conditions.
3-4
Over Voltage Protection
The circuit will be shut down automatically when input voltage over 30VDC. And re-started when Voltage down to 30VDC below.
3-5
Soft Start
In 5 seconds after power on and speed control voltage gets to 1.5V.


Enviromental Characters:

4-1
Operating Temperature
-25ºC to 60ºC
4-2
Storage Temperature
-40ºC to 75ºC
4-3
Operating Humidity
5% to 90% RH
4-4
Storage Humidity
5% to 95% RH
4-5
Drop Test
In minimum packaging condition fan withstand each one drop of three faces from 30cm distance height onto 10mm thickness of wooden board
4-6
Vibration Test
Sine Wave.
Displacement amplitude: 0.75mm (Equivalent 10G).
Frequency Range: 10Hz~55Hz / 30 sec. 55Hz~10Hz / 30 sec
Linear Scanning 120 Cycle
Endurance timer per axis: 2 Hours
Orientation: X,Y,Z.
4-7
Shock Test
Apply peak acceleration 50g and keep duration of the pulses for
11ms (Half sine wave).
4-8 
All the material meets RoHS standard.

Performance Curve:

Outline Drawing

Detailed Photos



 

Recommend Products

        High Quality Suppliers Greentech        Manufacturers Direct Selling 24V          Best Selling Manufacturers Tangential Star    High Quality Low Price Kitchen and
    Aluminum Low Noise Cross Flow Fan      Aluminum Alloy Cross Flow Blade            Blower Motor Cross Flow Fan for Twin         Bathroom Ventilation Tangential Blower
                                                                      Coldest Blowing Tower Fan                                                                                             Cross Flow Fan for Fireplace                                                                           

Model
Part No.
Rated Voltage
VDC
Air Flow
M3/H
Air Pressure
Pa
Rated Speed
RPM
Sound Level
dB(A)
Total
Length
mm
PC30B1298C123517300029145
PC30B2498C243517280029145
PC30B12160C124215270030207
PC30B24160C244215260030207
PC30B12198C125214270031245
PC30B24198C245214250031245
PC30B12248C125514300032295
PC30B24248C245514300032295
PC30B12300C127213280033347
PC30B24300C247213280033347
PC30B12352C128413250034399
PC30B24352C248413255034399
PC30B12420C1210514240035467
PC30B24420C2410514240035467

Company Profile



 

FAQ

 



 

Product Tag:
Related categories:
Scroll to Top