Description
Specifications1. Used for automatic backup switching of main and backup optical signal in CATV ring optical fiber network
2. With RF detection
Performance Characteristics1. Use imported high-performance switching devices.
2. Adopt advanced 32 processor, coordinate with perfect automatic monitoring systemic circuit. It can timely and accurately monitor input power, reliably control the switch status and setup to the automatic switch mode or the manually switch mode.
3. Built-in blue screen 160× 32 DOT matrix LCD monitor on the front panel, accurately show all working status parameters.
4.191U height standard rack mount, equipped standard IEEE802.3 10Base-T Ethernet interface and RS232 interface, can expediently realizes network management monitoring.
5. Full support <GB/T 20030-2005HFC Network device management system specification>.
Item
| Unit
| Technique Parameter
| Remark
|
Wavelength
| nm
| 1200 - 1600
|
|
Insertion loss
| dB
| ≤ 1.3
| 1310nm/1490nm/1550nm
|
Switching time
| ms
| ≤ 5
|
|
Back wave loss
| dB
| ≥ 55
|
|
Max input optical power
| mW
| 500
|
|
Switching life
|
| ≥ 1000times
|
|
Optical connector type
|
| FC/APC or SC/APC
|
|
Supply voltage
| V
| AC160V - 250V (50 Hz ) /DC-48V
|
|
Consumption
| W
| ≤ 2
|
|
Operating temperature
| º C
| -5 - +55
|
|
Max relative humidity for working
| %
| Max 95% No condensation
|
|
Storage Temperature
| º C
| -30 - +70
|
|
Max relative humidity for storage
| %
| Max 95% No condensation
|
|
Dimension
| mm
| 483(W) × 270(L)× 44 (H)
|
|
Flow Chart
Complaint
