Description
XY-2BL Water Well Drilling Rig with crawler
APPLICATIONS:
XY-2BL rig is developed based on our XY-2 core drilling rig, integrating drilling rig, crawler, mud pump, console rack and other devices into the integral one. It is mainly targeted at the shallow-medium hole of geology core drilling, and where the mobility is important. It is modular and integral drilling rig.
FEATURES:
1. Integrated crawler, rig, mud pump, console racks;
2. Crawler, the whole support rigs and tower with ups and downs are controlled by the hydraulic system of the rig, easy to operate and transport;
3. The whole set of equipment can move to relocate, improve drilling efficiency, reduce labor intensity;
4. The tower has the function of ups and downs, folding, easy walking and transportation;
5. Rig with more (8 block) the speed of progression and reasonable speed range, and the relatively large low-speed torque, wide range of application.
6. Rig has two reverse gear speeds, easy to deal with incidents;
7. Rig has longer feed stroke as long as 600mm, will help improve drilling efficiency and reduce blocking drill, burning accidents;
8. Rig has double oil pump, less power consumption, lower oil temperature of hydraulic system;
9. Rig has few control levers, rational layout, flexible and reliable operation;
10. In addition there is a normally closed upper hydraulic chuck on, but also with lower mechanical man-powered chuck.
Crawler Mounted Portable Water Well Drilling Rig Core Drill Rig Drill Tool
| 1 | Drilling depth (NQ drill rod) | Approximately 500m | |
| 2 | Spindle speed | Forward | 57;99;157;217;270;470;742;1024 | |
| Reverse | 45;212 r/min | |
| 3 | Spindle Maximum torque | 3200 N@m | |
| 4 | Spindle max pulling force | 60 KN | |
| 5 | Spindle stroke | 600 mm | |
| 6 | Max. lifting force of the hoist with single rope | 30 KN | |
| 7 | Inner diameter of the spindle | 96 mm | |
| 8 | Retraction distance | 305 mm | |
| | Retraction distance for the host drill rig | 330 mm | |
| | Retraction distance for both drill rig and tower | 160 mm | |
| 10 | Oil pump | SCB32/12 double gear pump | |
| 11 |
Power unit | engine power | 30 KW 1500 r/min | |
| electric motor | 22KW 1470 r/min | |
| 12 | Crawler maximum walking speed | 1.2 km/h | |
| 13 | Crawler Climbing capacity | 25°, no more than 25 ° | |
| 14 | Tracked Ground pressure | 0.042 MPa | |
| 15 | Rig height | 8 m | |
| 16 | Hook load of the tower | 29.4 kN | |
| 17 | Max.static load of crown block beam | 58.8 kN | |
| 18 | Quantity of pulley | 2 | |
| 19 | Angle range of tower ups and downs | 0°~90° | |
| 20 | Rig Dimensions ( tower horizontal position ) | (L*W*H) 4450×2166×3080 mm | |
| 21 | Total weight | about 5500 kg | |
Crawler Mounted Portable Water Well Drilling Rig Core Drill Rig Drill Tool
Crawler Mounted Portable Water Well Drilling Rig Core Drill Rig Drill Tool
Complaint
