Complaint
| model | uPVC63 | uPVC160 | ||||
| pipe range(mm) | 20-110 | 110-160 | ||||
| capacity(kg/h) | 100 | 150-200 | ||||
| center height(mm) | 1000 | 1000 | ||||
| extruder model | SJ65 | SJ90 | ||||
| screw diameter(mm) | 65 | 90 | ||||
| L/D | 25:1 | 25:01:00 | ||||
| single screw | Screw rotation speed(rmp) | 80 | 100 | |||
| extruder | motor power(kw) | 22 | 37 | |||
| heating power(kw) | 16 | 36 | ||||
| coolin blower power(kw) | 0.75 | 0.75 | ||||
| length of calibration case(mm) | 6000 | 6000*2 | ||||
| vacuum calibration tank | vacuum degree(mpa) | 0-0.1 | 0-0.1 | |||
| absorbing gas speed(m3/h) | 60 | 60*2 | ||||
| water pump power(kw) | 4 | 4 | ||||
| longitudinal moving motor power(kw) | 1.1 | 1.1 | ||||
| Spray cooling tank | length of spraying tank(mm) | 4000-6000 | 6000-8000 | |||
| water pump power(kw) | 4 | 5.5*2 | ||||
| driving power(kw) | 2.2 | 4 | ||||
| haul off machine | max pull(N) | 7000 | 12000 | |||
| effctive haul off length(mm) | 1500 | 2000 | ||||
| blade diameter(mm) | 350 | 500 | ||||
| Pneumatic blade type cutter | driving power(kw) | 1.1 | 1.1 | |||
| working air pressure(mpa) | 0.7-0.7 | 0.7-0.7 | ||||
| stacker | length(mm) | 6000 | 6000 | |||
