Description
PP make up balls blow molding machine| electronic parts | |
| Name | Trader |
| Micro computer control system | Japanese MITSUBISHI |
| Temperature Controller | TAIWAN YANHUA PID |
| Auxiliary Relay | OMRON |
| contactor | Schneider from France |
| Electric motor | Three phase 220V or 380V |
| Power Source | TAIWAN MEANWELL |
| Transducer | TAIDA FROM CHINA |
| hydraulic parts | |
| Name | Trader |
| Oil pump | TAIWAN HIGH-TECH |
| Valve | TAIWAN JINSHUN/YUKEN |
| Oil pump and connection | TAIWAN JINSHUN/YUKEN |
| Sealed part | HALLITE |
| air control system | |
| Name | Trader |
| Cylinder | AIRTAC |
| Air Valve | FESTO |
PAYMENT:
30% down payment paid at signing this contract by T/T , and the balance of 70% paid before shipment by T/T or irrevocable L/C.
DELIVERY:
Delivery no later than 40 days, after we received the deposit.
Related technical parameter:
| Max. Product volume | 3.5 liters |
| Dry cycle | 1100pc/h |
| Screw diameter | 55mm |
| Screw L/D ratio | 24 L/D |
| Screw drive power | 15 KW |
| Screw heating capacity | 5-6 KW |
| No.of heating zone | 3 zones |
| Output of HDPE | 60 KG/H |
| Oil pump drive power | 7.5 KW |
| Clamping force | 45 KN |
| Max.size of mold | 148-508mm |
| Mold stroke | 320X360mm |
| Max.die diameter | 140mm |
| Blowing pressure | 0.6mpa |
| Air volume | 0.5 M³/MIN |
| Cooling water pressure | 0.3mpa |
| Water consumption | 40 L/MIN |
Complaint
