Description
The core drill rig of full hydraulic and rotator adopted the technology of wire-line coring has been the dominant type rig for solid mineral deposits prospecting in developed counties in the world. It is also the developing direction of drilling technique and drilling equipment in China. Under these circumstances, Lianyungang Huanghai Machinery Co., Ltd. Has developed the HYDX-4 core drill rig successfully according to the situation of China. This type of drill rig could substitute imported products. It could be applied to exploration and prospecting of geology, metallurgy, coal, petroleum, natural gas, groundwater and other industries.
The drill rig is equipped with a series motor driving pump. The feeding and lifting of rotator are driven in the structure of cylinder directly pushing, with a 3.5m(11.5 feet) stroke. The rotation of spindle is driven by a single engine. It has four mechanical shifts of range of speeds, and the speed could be adjusted hydraulicly with stepless change.
The rig is simple in structure. It is light and easy for transference; The mast has the functions of sliding and touching ground; The spindle lifted and lowered with hydraulic cylinder; It could be folded for transport and relocation. The spindle hole is in large diameter.
Diesel Engine
Model
Cummins 6BTA5.9-C180 (turbocharged and charge water cooled)
Displacement
5.9L (1.56 US Gallons)
Power
132Kw (180HP)
Rated RPM(Factory setting)
2200rpm
Drilling Capacity
BQ
1000m(3280feet)
NQ
700m(2296 feet)
HQ
500m(1640 feet)
PQ
300m(984 feet)
Drill Head
Rotation Motor
Hydraulic Motor-variable
Maker: SAUER-DANFOSS
RPM
Four Shifts/ Stepless Change 0-1100 RPM
Ratios
1st 14.422: 1
2nd 8.171: 1
3rd 4.519: 1
4th 2.652: 1
Head Opener
Pivoting style, Manual actuated
Hydraulic Chuck(PQ)
Hydraulically opened, Disc Spring Clamping, Normally C Closed Type
Axial Holding Capacity of 222 400 N
Max. Torque
3700 N@m(2727 lbf@ft)
Hold Diameter
121 mm(4.76 inch)
Max. Lifting capacity of Spindle
150 kN(33720 lbf)
Max. Feeding Power
60 kN(13480 lbf)
Primary Pump
Hydraulic pump
Axial Piston variable displacement Triplex pump for driving of rotator, winch mud pump & leveling jacks.
With load sensing system.
Maker: DANFOSS
1st Pump: 148LPM at 31.5MPa
2nd Pump : 120LPM at 28MPa
3rd Pump : 50 LPM at 16MPa
Hydraulic Tank
Capacity
310 L (82 US Gallons)
Capacity of Main Hoist
Hoisting force (single wire)
57kN(12814 lbf) (bare drum)
Hoisting Speed (single wire)
38-70m/min(bare drum)
Steel Wire Diameter
18 mm(0.71 inch)
Steel Wire Length
50 m(164 feet)
Capacity of Wireline Hoist
Hoisting Force (single wire)
1200 Kg(2646 lb) (bare drum)
Hoisting Speed (single wire)
60-90m/min (bare drum)
Steel Wire Diameter
5.3 mm(0.2 inch)
Steel Wire Length
1000 m(3280 feet)
Mast
Mast Height
9.6 m(31.49 feet)
Mast Adjusting Angle
0° _90°
Drilling Angle
45º off horizontal to 90º vertical down
Feed Pull
15000kg(33075 lb)
Feed Thrust
6000kg(13230 lb)
Rod Pull
3m or 6m(9.84feet or 19.68feet)
Feeding Stroke
3500 mm(137.80 inch)
Slippage Stroke
600 mm(23.62 inch)
Mud Pump
Type
Reciprocating pump Triplex Plunger
Model
BW160/10
Stroke
70mm(2.76 inch)
Discharge pressure
2.5, 4.0, 6.5, 10.0 Mpa
(363, 580, 943, 1450 psi)
Foot Clamp
Clamping Scope
55.5-110 mm(2.19-4.33 inch)
through hole dia 154mm(6.06 inch)
Others
Weight (platform type)
9300 Kg(20506 lb)
Dimensions (L× W× H)
5100× 2200× 2650mm
(200× 86.6× 104.3 inch)
Transport Way
Crawler
Complaint
