Fast Installation Steel Structure Factory Prefabricated Living Family Integrated Modular Homes House

Min.Order: 1
Product origin: Qingdao, Shandong, China
Infringement complaint: complaintComplaint
US$ 40 ~ 80

Description
Fast Installation Steel Structure Prefabricated house

 

Company Profile

 







 
Product Description


Repeatable disassembling. Keep warm.
Highly accurate pre-punched bolt hole placement is assured through the utilization of the latest technology making field assembly of buildings faster and easier.

2. Earthquake Resistant:

Our painted Steel Structure are specifically engineered so as to resist building damage caused by major earthquakes.

3. Energy Efficient

Our construction system creates valuable energy efficiencies through the use of a very sophisticate isolation material. We use a hypo-allergenic polyethylene foam or mineral foam- one of the most energy efficient homes available today. This radiant/moisture barrier reflects 97 % of the radiant heat penetration in summer and radiant heat loss in the winter.

4. Installation

Installation is made according to the technical specifications established by the country where the houses will be built

5. Timing

First shipment leaves within short time after the contract is signed and the fist payment is executed.

The materials are loaded in 40 or 20 feet closed dry ocean containers.

Customers visit our factory:



 

No.
 

Sort
 

Members
 

Descriptions
 

1
 

Measurement
 

length
 

customized
 

Roof Single Span
 

customized
 

Wall Single Span
 

customized
 

Clear height
 

KXD can do 3 stories buildings with light gauge framing system
 

Roof pitch
 

slope is 1:20(1.15°)~1:50(2.8°)
 

2
 

Specification
 

Roof
 

*5:12 Roof slope; Roof truss at 24" (609 mm) O.C. connected to wall tracks

*R30 Fiberglass insulation in the roof truss cavity

*1/2"(12mm) OSB board on top of the truss chord

*Waterproof attached to OSB board

*Mason tile, corrugated meatal tile, asphalt tile or terracotta tile shingle roofing (Standard)

*1/2"(12mm)Gypsum board for inside ceiling

 

Exterior wall
 

*3.5" (89 mm) Wall studs spaced at 16" (406 mm) or 24" (609 mm) O.C. anchored to the foundation

*R13 Fiberglass Insulation in the wall stud cavity

*1/2" (12 mm) OSB Board Covered On the Outside of the Stud Flange

*Breathing paper

*5/16" (8mm) cement Siding on the Outside surface of the Exterior Wall

*Paint on the siding

*1/2" (12mm) Gypsum Board on the Inside Surface

 

Interior Wall
 

*3.5" (89 mm) Wall studs spaced at 16" (406 mm) or 24" (609 mm) O.C. anchored to the foundation

*5.5" (140 mm) Wall studs spaced at 16" (406 mm) or 24" (609 mm) O.C. in bathrooms for plumbing system

*1/2" (12mm) Gypsum board or waterproof Gypsum board on both Sides of the wall frames

*Normal interior door, c/w frame and casing

*Wall tiles in part of Bathroom and Kitchen

 

Floor
 

*10" (250 mm) or 12"(300mm) Floor Joists spaced at 16" (406 mm) or 24" (609 mm) O.C

*3/4" (18mm) OSB Board on floor joists

*1/2" (12mm) Gypsum board for the ceiling

*Tiles in Bedrooms & living room.

*Tile flooring in Bathrooms and Kitchen

*MDF Baseboard

 

Kitchen
 

*Laminate Panel Cabinets c/w hinges & laminated panel doors (Standard)

*Brushed nickel handles & knobs on doors & drawers

*Granite countertops c/w backsplash

*Stainless sink c/w chromed goose neck faucet with sprayer

 

Bathroom
 

*60" (1524 mm) Bath tub c/w chromed shower faucets

*Toilet 1.6 Gal. per flush

*Granite countertop vanity

*Lavatories c/w chromed faucets

*Laminate Panel Cabinets c/w hinges & laminated panel doors (Standard)

 

Others
 

*Steel stairs included

*Plumbing and Electrical pipes (wires) systems excluded

 

Channel
 

Galvanized Steel Plain Sheet press molding Material: Q235. Painted
 
FAQ
 
1. What kind of company you are?
We are steel structure building Manufacturer located in Qingdao China, We were gaining good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business based on the quality control, price, packing, delivery time etc.

 2. Does your company is a factory or trade company?
We are factory, so you will enjoy the best price and competitive price. Our factory covers an area of 150,000 square meters.

3. Whats the quality assurance you provided and how do you control quality ?
Established a procedure to check products at all stages of the manufacturing process - raw materials, in process materials, validated or tested materials, finished goods, etc.

4. Can you offer designing service?
Yes, we have more than 100 design engineers. We could design full solution drawings as per your requirements. They use software: Auto CAD,PKPM, MTS, 3D3S, Tarch, Tekla Structures(X steel)V12.0.etc.

5. Do you offer guiding installation on site overseas?
Yes, we can provide the service of installation, supervision and training by extra. We can send our professional technical engineer to supervise installation on site overseas. Besides, We also have our own abroad guiding installation team consisting of more than 30 people. 

Product Tag:
Related categories:
Scroll to Top