Complaint
1. Electromagnetic Flow Meter
Electromagnetic flowmeter is a kind of high performance, high reliability of the flowmeter. Widely used in petroleum, chemical to measure water, sewage, acid, alkali, salt solution or volume flow of liquid-solid two-phase fluid conductive medium.
Main Features:
1. The measurement accuracy is not affected by the changes of fluid density, viscosity, temperature, pressure and conductivity.
2. The measurement tube has no obstruction of flow components, no pressure loss.
3. Has a variety of output : current, pulse, digital communication, HART ;
4. LCD displays cumulative flow, instantaneous flow, flow rate, flow percentage, etc.
5. Two-way measuring system, can measure forward flow, reverse flow.
2. Vortex flow meters
LUGB series Vortex flow meters are designed for measuring the volume/mass flow of liquids, gases and steam based on Karman vortex principle.
Main Features:
1. Configure with temperature/pressure senor.
2. Low power consumption, a dry battery can service at least 3 years.
3. Self-checking function: the rich self-checking information makes maintenance and debugging easy.
4. Three-Wire system supports RS485 communication.
3. Turbine flowmeter
LWGY Turbine flowmeter is composed of turbine, bearing, preamplifier and display instrument. It is high measurement accuracy, low price, low weight, good repeatability. It is widely used in petroleum, chemical, metallurgical, textile, food, pharmaceutical, paper and other industries, as well as environmental protection, municipal management, water conservancy construction and other fields.
LWQZ gas turbine flowmeter is designed and produced for the measurement and control of various gases. It can display instantaneous flow and cumulative flow at the same time, It can automatically compensate for temperature, pressure and compression factor at standard condition (Pb=101.325kPa,Tb=293.15K). It is widely used in gas metering of petroleum, chemical, power, metallurgy, industrial boilers and other industrial industries and urban natural gas, gas regulator stations and gas trade metering.
4. Coriolis Mass flow meter
UICMF Coriolis mass flowmeters are the leading precision flow and density measurement solution, offer the most accurate and repeatable mass measurement for liquid and gas. while exhibiting exceptionally low pressure drop. Measuring the Mass flow rate + volume flow rate + density measurement +temperature measurement +calculated variables (e.g. fluid concentrations) at the same time.
Main Features:
1. UICMF flowmeter gives Unchallengeable performance on liquid mass flow, volume flow, and density measurement.
2. Unique design delivers unparalleled measurement sensitivity and stability.
3. Guarantees consistent, reliable performance over the widest flow range.
4. Designed to minimize process, mounting, and environmental effect.
5. Ultrasonic flowmeter
Ultrasonic flowmeter is a type of non-contact pipe flow meter. It can be used for production monitoring, water meter balance debugging, heating network balance debugging, and energy-saving monitoring. It is the necessary tools and instruments for timely flow detection.
Main Features:
1. Installed outside the pipe, without intercepting, breaking the pipe, and no pressure loss.
2. when Equipped with an external clamp temperature sensor to test temperature, can achieve heat metering.
3. the signal cable can be any length.
4. Flow measurement of large diameter pipeline can be realized.
6. Thermal gas mass flowmeter
Thermal gas mass flow meter is designed on the basis of thermal dispersion, and adopts method of constant differential temperature to measuring gas flow. It has advantages of small size, easy installation, high reliability and high accuracy, etc.
Main Features:
1.Different gas coefficient arbitrarily set.
2.Show multiple sets of values.
3.Straight pipe requirements smaller, 1D-2D canachieve high-precision measurement.
4.LCD display, with Multiple display interface.
| Electromagnetic Flow Meter | |
Main power | AC220V 50HZ/110VAC / DC24V /battery/solar |
Display | LCD display with back lighting can display the instantaneous flow ,total flow and percentage of flow as well as alarm display |
Connection method | clamp on,wafer,flange(JIS,DIN,ANSI,ASME,),thread(BSP,NPT,G,CG),tri clamp,clamping ,welding |
Body material | SS304,SS316L,CS,PP |
Lining material | PTFE,NBR,rubber,F46,F4,EPDM,PO,PPS,PEA,ceramics |
electrode | SS316L,HC,HB,Ti,Ta,Pt,ceramics |
Accuracy | ±0.5% of the value displayed ,±0.3% or ±0.2% are selectable. |
Signal output | 4-20ma,pulse,0-5V,0-10V,Alarm |
Communication | RS232 ,RS485,Profibus or HART Communication are selectable , |
Protection class | IP65/IP68(split type) |
Ex-proof Mark | Exd IIBT4 |
Accumulator | Forward total quantity ,reverse total quantity |
Medium Temperature | -40ºC ~ +180ºC |
Medium Electrical Conductivity | ≥ 20μs/cm;special make ≥ 5μs/cm |
Measuring Range | 1500 : 1, flow rate < 15m/s |
| Vortex flow meters | |||
| DN (mm) | DN25-DN300, DN300~1000 insert type | PN | 1.6MPa ~4.0MPa |
| Range ratio | 1:6~1:30 | Power | +24V DC; 3.6V battery |
| Fluid | Steam, Gas, Liquid | Material | Carbon steel, SS304, SS316 |
| Accuracy | ±1.5%R, ±1FS; insert: ±2.5%R, ±2.5%FS | Signal | pulse (no-battery) or 4~20mA |
| Suitable temp. | -40~250 ºC, -40~450C | IP | IP65 or IP68 on order |
| Vibrating acceleration | Piezoelectric type:0.2g, Capacitance:1.0~2.0g | ||
| Environment | Temp -20ºC~55ºC,Relative humidity 5%~90%, Atm press 86~106kPa | ||
| Transmission distance | 3-wire flow sensor:≤300m, 2-wire 4~20mA: load resistance≤750Ω | ||
| Liquid Turbine flowmeter | |
| Nominal diameter | 4~200mm |
| Accuracy level | ±1%R. ±0.5%R. ±0.2%R(Need to be specially made) |
| flow velocity range | 0.9-7m/s |
| Work temperature | -20 C~+110 C |
| Work pressure | 1.6Mpa;2.5Mpa;4Mpa;6.3Mpa;>6.3Mpa~20MPa |
| Ambient | Temp.: -10 C to +55 C, Pressure: 86 to 106 KPa , Humidity: 5% to 90% |
| Material | 304SS ; SS316L etc |
| Output mode | Field display ; 4-20ma ; pulse signal |
| Communications | RS485, HART |
| Explosion-proof | Explosion-proof EXdII BT1~T6;Intrinsic explosion-proof type EXiaII CT1~T6 |
| Protection level | IP65 (Can customizable higher) |
| LWQZ Gas turbine flowmetr | |
| Measuring diameter | 25~300mm |
| Accuracy level | ±1.5%R, ±1%R |
| Flow rate range | 2.2-80m/s |
| Medium temperature | -30oC~+80oC |
| Working pressure | 1.6Mpa; 2.5Mpa; 4Mpa |
| Environmental temp. | -20oC~+60oC |
| Material | 304SS ; SS316L |
| Power supply | 8-24VDC+ 3.6V lithium battery |
| Output mode | Field display; 4-20mA; pulse |
| Communication | RS485 ; HART |
| Explosion-proof | EXdII BT1 ~ T6 , EXiaII CT1 ~ T6 |
| Protection level | IP65 ( or higher ) |
| Coriolis Mass flow meter | |
| Diameter | 10~150mm |
| Accuracy | 0.5%; 0.2%; 0.15%; 0.1% |
| Repeatability | ±0.1~0.25% |
| Density measurement range | 0.5~3.000g/cm3, Accuracy: ±0.002 g/cm3 |
| Temperature measuring range | -200~350ºC, Accuracy: ±1ºC |
| Material | The measuring tube SS316L; Housing: SS304 |
| Working pressure | 0~4.0MPa |
| Ambient temperature | -40ºC~60ºC |
| Power supply | 18~36VDC;85~265VAC |
| Unit | Mass flow rate: g/h. kg/h. t/h. g/m. kg/m. t/m Total flow: g, kg, t Volume flow rate: cm³/h. dm³/h. m³/h. cm³/m. dm³/m. m³/m Total volume: cm³/m. dm³/m Density: kg/m³. g/cm³ Temperature:ºC. K. ºF |
| Output signal | 0~10000Hz pulse frequency signal flow signal (open collector signal) Equivalent pulse signal flow signal 4~20mA Current signal choose one signal from flow rate, density, temperature Current output load capacity is not less than 750Ω(24VDC power supply) Accuracy: Pulse signal 0.05% Current signal 0.2% Communication signal: RS485, MODBUS protocol Hart |
| Explosion-proof level | Exd (ia) II C T6Gb |
| Transmitter and Sensor protection | IP67 |
| Ultrasonic flowmeter | ||
Items | Specifications | |
Main unit | Accuracy | Better than ±1% |
Repeatability | Better than 0.2% | |
Display | LCD with backlight, display accumulated flow/heat, instantaneous flow/heat, velocity, time etc. | |
Output | Analogue output: 4-20mA or 0-20mA current output. Impedance 0∼1kW. Accuracy 0.1%. | |
OCT output: Frequency signal (1~9999HZ) | ||
Relay output: over 20 source signal (no signal, reverse flow etc.) | ||
RS485 serial port | ||
pipe | material | Steel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed |
Size | 15-6000mm | |
Straight pipe section | In the upstream it must be beyond 10D, in the downstream it must be beyond 5D, in the upstream the length must be beyond 30D fro the access of the pump. (D stands for pipe diameter) | |
Liquid | Types | Water, sea water, industrial sewage, acid & alkali liquid, alcohol, beer, all kinds of oils which can transmit ultrasonic single uniform liquid |
Temperature | Standard: -30˚C - 90˚C ,High-temperature:-30˚C - 160˚C | |
Turbidity | Less than 10000ppm, with a little bubble | |
Flow Direction | Bi-directional measuring, net flow/heat measuring | |
Cable | Twisted Pair Line, standard length of 20m, can be extended to 500m (no recommended); Contact the manufacturer for longer cable requirement. RS-485 interface, transmission distance up to 1000m | |
Power Supply | AC220V or DC24V | |
Power Consumption | Less than 1.5W | |
Protocols | MODBUS, M-BUS, Fuji extended protocol and other factory protocol | |
| Thermal gas mass flowmeter | |
| Measuring Medium | Various gases (Except the acetylene) |
| Pipe Size | DN10~DN4000mm |
| Velocity | 0.1~100 Nm/s |
| Accuracy | ±1~2.5% |
| Working Temperature | Sensor: -40ºC~+550ºC Transmitter: -20ºC~+45ºC |
| Working Pressure | Insertion Sensor: medium pressure≤ 1.6MPa Flanged Sensor: medium pressure≤ 1.6MPa Special pressure please contact us |
| Power Supply | Compact type: 24VDC or 220VAC, Power consumption ≤18W Remote type: 220VAC, Power consumption ≤19W |
| Output | 4-20mA (optoelectronic isolation, maximum load 500Ω), Pulse, RS485 (optoelectronic isolation) and HART |
| Alarm Output | 1-2 line Relay, Normally Open state, 10A/220V/AC or 5A/30V/DC |
| Sensor Type | Standard Insertion, Hot-tapped Insertion and Flanged |
| Construction | Compact and Remote |
| Pipe Material | Carbon steel, stainless steel, plastic, etc |
| Display | 4 lines LCD Mass flow, Volume flow in standard condition, Flow totalizer, Date and Time, Working time, and Velocity, etc. |
| Protection Class | IP65 |
| Sensor Housing Material | Stainless steel (316) |
| Applicable media | Dry gas, air which doesn't contains water. |
| Measuring range | 0.05-141m/s (at standard conditions 20ºC, 0.101325MPa), if flow velocity out of this range, please consult with the manufacturers customization |
For small order quantity,we can send them to you by express delivery,TNT,DHL,UPS OR EMS etc. For big order quantity ,we will advise you to use Air Shipping or Sea Shipping through your nominated forwarder agent or our long-term cooperated agent.
1. who are we?
We are based in Hebei, China, start from 2017,sell to Domestic Market(15.00%),Mid East(12.00%),South America(10.00%),Southeast Asia(10.00%),Eastern Asia(10.00%),North America(9.00%),Northern Europe(8.00%),Africa(5.00%),South Asia(5.00%),Southern Europe(5.00%), Eastern Europe(5.00%),Central America(2.00%), Oceania(2.00%),Western Europe(2.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Level Indicator,Level sensor,Level Switch,Flow Meter,Pressure sensor
4. why should you buy from us not from other suppliers?
20 years export experience.
We are group company with Tianjin U-ideal Instrument Co., Ltd.
More than 20years for products Research and development.
5000m2 factory, high-precision machines.
Level gauge, flowmeter and pressure sensor have top quality
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,CPT,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card, PayPal,Western Union,Cash;
Language Spoken:English,Chinese
