Description
Heat pipe Solar Collector Features:
1. Especially for large-scale hot water heating system, supplying hot water for apartments, hotels, restaurants, schools, hospitals, factories, swimming pools, and other places requiring large amount hot water use.
2. Very economical and of good performance for a 15 years lifespan
3. Adaptable to different architecture structure installation
4. Anti-freezing system with good insulation to the pipelines
5. Easy installation and connection of solar collectors and pipelines
6. Able to be disigned to work with axuiliary heating devices to assist solar water heating.
Our heat pipe solar collectors have widly tested in Swizerland SPF lab. And certified with Solar Keymark and SRCC.
The heat pipe solar collector consists of mainly heat pipe vacuum tubes, pressurized manifold, suppoting bracket.
1) Solar heat pipe and its inner antifreezing midium for solar thermal absorbing and transmission, with a quick start and heat transmission and exchange
2) The direct-flow copper header is pressurized with its inner mechanically closed, no water or medium goes through glass tubes, no freeze to break glass tubes, able to serve in extremely cold weather
3) Heat pipe tip is inserted into a closed copper cannula which is welded into the copper header, withdrawal one or several tubes will not drain the whole system
4) Aluminum alloy as bracket with super performance in chemical resistance, universal bracket suitable for slope and flat roof and wall installation
5) Modularized collector, arbitrary combination with any architectural structure, adaptable to either slope roof or flat ground or upright walls, almost maintenance free collector
Heat Pipe
Vacuum Tube
|
Tube Size
|
Φ58×1800MM
|
Tube Nos.
|
12 / 15 / 18 / 20 / 24 / 25/ 30
|
Material
|
Three-target vacuum tube, antifreezing copper heat pipe, aluminum absorber fin
|
Coating
|
Cu/SS-ALN(H)/SS-ALN(L)/ALN
|
Pressurized
Manifold
| Header
|
High-quality copper Φ35*1.0mm, 12 bar pressure test
|
Casing
|
High-quality black/ gray aluminum alloy 2mm
|
Insulation
|
Moulded high-density fibre glass wool 55m
|
Bracket
|
Black/ gray Aluminum alloy 1.8~2.0mm
|
Accessories
|
Stainless bolts & nuts, anti-aging rubber seal and tube holder
|
Test Pressure
|
12 bar
|
Tilt Angle
|
20°~ 90° (-5° upright or level shift)
|
Hail Resistance
|
Φ25mm in diameter
|
Anti-freezing
|
≤ (-)40°C
|
Complaint
