Description
Introduction:
Steel Micro hardness Tester is a lab instrument to measure the hardness value of all kinds of metals according to Micro indentation hardness principle ASTM E384 and ISO 6507. They are widely used in metallurgy, forging, casting, hardness steel and nonferrous metals ,IC thin sections, Coatings, ply-metals; Glass, ceramics, agate, precious stones; thin plastic section industries, as well as in the laboratories, universities, college and scientific research institutes.
Features:
1.Two grades micro-reading magnification with 100X and 400X times.
2.Large LCD screen can directly show measurement methods, test force, indentation length, hardness value,
dwell time of test force and the number of measurement.
3.Reading the data and testing result, processing data, outputting the result to printer, converting the scales to
17 scales of HV, HR, HB and etc, saving data and linking RS232 interface.
4.Can be Optionally equipped with digital microscope and interface, which can be linked to camera and CCD vid
eo-camera.
5.Can take photos of the indentation and metallographic composition of the material If equipped with a pick up
camera.
6.Lens/indenter switch With Motorized Turret.
Specification:
| Model | HVM-1000 | HVM-2000 |
| Test load | 0.098N (10gf), 0.246N (25gf),
0.49N (50gf), 0.98N (100gf),
1.96N (200gf), 2.94N (300gf),
4.90N (500gf), 9.80N (1000gf) | 0.098N (10gf), 0.246N (25gf),
0.49N (50gf), 0.98N (100gf),
1.96N (200gf), 2.94N (300gf),
4.90N (500gf), 9.80N (1000gf)
19.6N (2000gf) |
| Leus/indenter switch | Motorized Turret |
| Carriage control | Automatic loading and unloading method |
| Magnification of microscope | For measurement: 400X (Object lens 40x , eyepiece 10x) |
| For observation:200X (object lens 20x, eyepiece 10x) |
| Load holding time | 5-60 second |
| Measuring microscope | Min measuring unit: 0.0625um |
| Testing field | 1-2967HV |
| Micro test table | Dimensions 100x100mm |
Complaint
