Plastic Elements Plastic parts of our products are manufactured by rotational moulding of LLDPE imported from Samsung corporation in South Korea. And the wall thickness of the plastic parts are above 8mm.
Main Colums All the main columns are made of galvanized steel pipes with diameter of 114mm and wall thickness of 2.2mm. Quality and technical standard meets the requirements of National standard GB/T3091-2001.
Platforms All the platforms are shaped by piercing 2.2mm-thick cold-roll steel sheet, with bores of diameter 6mm. The quality and technical standard are conforming to the European EN1176 standard.
Other Metal Parts All the metal parts are made of galvanized steel pipes with diameter of 60mm, 48mm, 38mm, 32mm, 28mm and wall thickness of 2.2mm. Quality and technical standard meets the requirements of National standard GB/T3091-2001.
Fittings All the metal fittings are made of high strength aluminium alloy of one-time cast forming. After polishing processing, all the sharp corners are round and smooth. All the screws are made of stainless steel #314, which meets the standard of GB/T1221-1992.
Ropes and Nets The ropes and nets are imported high quality sailing ropes with diameter of 14mm & 16mm, containing an internal of high strength galvanized steel wire.
MORE VIEW !!!!
Our Products Advantages:
1. Protecting net: Knitted by high intensity nylon rope tools, with high intensity and good for safety. Comply with domestic standard. 2. Galvanized pipe: With a diameter of 4.8cm and wall thickness of 1.5mm, comply with domestic standard. 3. Pvc pipe: High-density foaming eva sponge coating with pvc wall thickness≥ 6mm, covered by twinkle leather, easy to clean, blooming in color, not easy to broken, good fire resistance. 4. Rainbow ladder: Wooden inside, pearl cotton outside, covered by pvc leather. With stronger intensity when put 2 galvanized pipes or metal parts under the rainbow ladder. Tilt angle is less than 30 degree when install it. Comply with domestic standard. 5. Platform: Most of the platforms are made of multi-layer, high intensity and high insurance function. 6. Plastic tube slide and slide: Bright color, anti-uv to level 8, consistent pharmaceutical grade rules, good anti-static ability, eco-friendly, good weather resistance 7. Mat: High density eva environmental sponge foam, no-toxic and no-odor, good elastic performance so that can protect the children well.
ABOUT US
FAQ
Q: How to maintain and clean the indoor playground? A: Maintenance: everyone should take off his shoes when entering the indoor playground; the EVA mat must be avoided to step by shoes with high heels. Cleaning: use cleaning rag to clean the surface of the indoor playground periodically. Q: If I have an indoor playground of 100 sq.ms, how many kids can be accommodated at one time? A: Normally, one square meter space can accommodate 1-2 children. So 100 sq.ms indoor playground can accommodate 100-200 children at one time. Q: Are there any limits about the height? How high do you usually make? Will it be dangerous if we make it higher than the normal? A: The height depends on the area size of your place. We must leave 30cm from the ceiling. Normally, we make two floors 2.8m while three floors 4.1m.If we have the space to make it higher, it's also possible and won't be dangerous. Q: What's the main material of indoor playground? A: The main material of indoor playground is galvanized pipe and plastic part, for the plastic part, we use imported LLDPE (Linear Low-Density Polyethylene) as raw material.
Our Mission For all what we have done, we are doing and we are going to do, just for one purpose, that the same with our MISSION, that is TO MAKE YOU 100% SATISFIED!!!
Complaint
