Description
Water based acrylic emulsion adhesive
(Dry Lamination Glue / Heat seal lamination glue )
Brief introduction:
It is benzene/toluene free water based acrylic polymer emulsion adhesive designed for dry bond /heat seal laminating process.
Dry bond lamination is the process of coating the adhesive to plastic film, drying the adhesive with heat and air flow and then laminating the adhesive to a second substrate(paper/paper board/cardboard etc..) via a heat compression nip.
It is mono-component adhesive with very good adhesion to flexible film .
We offer different viscosity adhesive, to meet slow, middle and high speed machine,
it can be used for manual, semi-auto, automatic and high speed full automatic lamination machines.
Application:
For lamination of plastic film like PET, BOPP, MPET to printed paper, silver /gold cardboard, paperboard, duplex board etc...
Type
Solid content
Features
Technical Parameter
D10
D1001
37%-42%
1, Good surface effect, good brightness and good composite fastness
2, apply for higher speed lamination
3, Less glue consumption, reduce production cost
4, most suitable for common cartons of fruit, food etc... without embossing
Components:
Acrylate copolymer
1, Appearance: Milky white emulsion
2, Viscosity (MPA.S):100-1000
3, PH value: 6.0-8.0
4, Storage: 6 months
5, Toxicity: non toxic
6, Solid content: 37%-48%
D1002
D1003
D20
D2001
37%-42%
1, Good surface effect, good brightness and good composite fastness
2, apply for higher speed lamination
3, Less glue consumption, reduce production cost
4, most suitable for PET film to paper ... without embossing
D2002
D2003
D30
D3003
42%-47%
1, Excellent powder cover ability, and composite fastness
2, High brightness and high speed lamination
3, very good effect for processing after lamination, such as partial embossing, heavy embossing, heat embossing etc...
4, suitable for double side lamination, gold/silver card paper lamination.
D3005
D3007
D50
D5001
37%-42%
1, special use for high speed lamination process.
2, lower adhesive consumption, reduce production cost
3, suitable for high speed lamination machine, such as milk box, carton etc..
without embossing process.
D5002
D5003
Advantage:
1. Lower consumption than oil / solvent based lamination adhesives.
2. water based adhesive, free of toluene, eco-friendly.
3, Easy to clean the lamination equipment.
4, can be use for highest speed automatic dry lamination machine.
Packing:
(1), 50kgs/Plastic drum, 20650kgs/1x20'GP without pallet. 13500kgs/1x20`gp withou pallet.
(2), 200kgs/drum,16000kgs/1x20'GP
(3), 1000kgs/IBC, 20000kgs/1x20'GP
Suggestion:
1, Before lamination, raise the temperature of the laminating machine roller to 95-110ºC, the temperature of the drying tunnel to 80-95ºC.
2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive disperse on roller evenly,
The amount of adhesive consumption shall be flexibly adjusted according to the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95ºC, the roller pressure shall be around 6-20kgs.
4, the pressure roll shall be controlled flexibly to ensure no adhesive overflow from both sides of film and connections.
Notice:
1, Clean the adhesive tank and roller before use our adhesive;
2, Do not mix our adhesive with other adhesives;
3, Our adhesive only apply for BOPP film with corona over 38 Dyne ;
5, Better make testing for with film or paper, before mass production, to check the color retention or bonding strength;
if you have any request, pls contact with us by email
Complaint
