Fusion Splicer Fiber Optic Splicing Equipment Fiber Optic Splicing Kit

Fushion Splicer

Description:

FS1030 Fiber Optic Fusion Splicer adopts a brand new design. Its powerful function and pretty low insertion loss fully satisfies the requirements for fiber splicing of the backbone and FTTx. The lightweight body and exquisite design save working space. With new fiber imagery system and pure digital design, image display is more delicate and clearer. Real-time embedded operation system provides user-friendly operation interface and more useful functions; Built-in high capacity Li-on battery supports long time operation in field; Real-time match system for humidity and air pressure makes it flexibly adapt the changing environment and obtain low insertion loss after splicing in harsh environment.

Features:
· Compact and full digital design
· Light weight (2.8Kg, including battery) and small volume
· High efficiency: 8 seconds for splicing, and 30 seconds for heating
· Three splicing mode: Auto, half-auto, manual
· Automatic splicing after closing the windshield, automatic heating after closing the heating cover
· Real-time discharging correction system, and need no adjustment of the parameters
· Simultaneously view of X and Y, 304x fiber magnification
· Real-time discharge calibration system
· Long lifetime of the electrodes: 4000 times
· Support USB and VGA interface
· One button operation to finish results download or software update
· 5.7 inch high definition LCD monitor provides clearer image display
· Battery capacity displayed on screen in real-time, precisely
· Built-in high capacity Li-on battery supports 220 times splicing and heating
· Built-in super high-brightness LED, convenience for night work
· New wind-cover design, enhance the ability to prevent the dust & wind, Max. Wind velocity of 15m/s
Technical Highlights:
· HD optical image acquisition system
· HD aligner for double separate optical fibers
· High performance CMOS sensor
· Sensor pixels 640*480

Len Imaging Optical Fiber Aligning System
· Fast evaluation of fiber profile
· Precise fiber alignment
· Precise evaluation of splicing loss

Real-time Discharging Correction System
· High performance discharging electrode
· AC-DC mix discharging technique
· Current feedback and environment compensation

 

Parameters	Specifications
Align Mode	Advanced profile alignment system(PAS)
Operation Mode	Auto, Half auto, Manual
Fiber Types	Single mode (ITU-T G.652) Multimode (ITU-T G.651) Dispersion shifted (ITU-T G.653) Non-zero dispersion shifted (ITU-T G.655) Other SMF including ITU-T G657 fibers
Average Splicing Loss	0.02dB with SM 0.01dB with MM 0.04dB with DS and NZDS
Return Loss (dB)	≥60
Fiber Diameter	Cladding diameter: 80µm ~ 150µm Coating diameter: 100µm ~ 1000µm
Fiber Cleave Length	8 ~ 16mm (coating diameter <250µm) 16mm(coating diameter 250 ~ 1000µm)
Splicing Time (s)	8 (Typical splicing time)
Heating Time (s)	30 (Typical heating time)
Data Transmission	USB port &VGA
Heater	Auto Heat Mode, the typical heating time is 30 seconds
Heat-Shrinkable Tube	40mm, 60mm and a series of micro Heat-Shrinkable Tubing
Screen Display	5.7 inch 640*480 LCD, core of the fiber is clearly visible
Backlight	Built-in super High-brightness LED supply convenience for night work
Magnifications	Vertical 152times, horizontal 304times
General Specifications
Power Supply	Alternating Current:100-240 50Hz/60Hz 30W, Direct current:13.5V/4.5A           Built in 11.1VLi-ion battery charger and AC adaptor
Battery Life	Support 220 times splicing and heating on one charge (3.5hours) at least
Battery Lifetime	Cycle life up to 300 ~ 500 times, replaceable
Tension Test (N)	2
Electrode Lifetime	>4000 times, replaceable
Operating Temp. (°C)	-10 ~ 50
Relative Humidity	0 to 95% (40 °C, non-condensing)
Work Altitude (m)	0 ~ 5000
Instrument Weight (kg)	2.3 (no battery ) 2.8 (including battery)
Dimensions (mm)	160Lx 150W x 140H