Description
3D panle wire mesh welding machine
Product Description
3D Panel Machine, 3d panle wire mesh machine, 3D EPS panel welding machine is for producing lightweight structural reinforced concrete.
This line is for producing 3D panel, also called structural reinforced concrete panel. This three-dimensional lightweight structural panel usually adopts 50mm thick inflammable polystyrene panel as core, one side or both sides covered with steel wire welded mesh. There are steel wire truss pierced completely through the polystyrene core and welded to the wire mesh outside.
This kind of panel is as semi pre-fab product. After delivered to the site and installed, cement mortar will be applied to the panel one side or both sides. Thus a light wall panel is formed.
This kind of panel is a new-style wall panel material with many perfect performances, such as light, easy & quick installed, energy saving, thermal insulation, sound insulation, inflammable, dampproof, etc. 3D Panel Machine, structural concrete panel machine, 3D EPS panel welding machine.
| Rated electrical power | 75KVA |
| Input voltage | AV380V 50Hz |
| Air source allocation | 3 cubic meter/min 0.6MPa |
| Applicable range | Core panel thickness | 50mm-100mm |
| Truss wire configuration | Single or double sided mesh, different densities of truss wires |
| Production standard | Standard sandwich panel | length | 3000mm |
| width | 1220mm |
| Nonstandard sandwich panel | The length according to your requirement ≤6000mm |
| Material characteristics | Welded wire material | 2.0-4.0mm cold-drawing low-carbon steel wire |
| Core panel material | Anti-flaming EPS board & XPS board |
| Grid space of mesh | 52mm*50mm(A-model) /
50mm*50mm(B model) |
| Lacking welding rate | ≤5% |
| Welding strength | Single point≥330N |
| Overall dimension | length | 13500mm |
| width | 1800mm |
| height | 1700mm |
| Weight | 4000kg
|
Guarantee and after-service:1. Our technician will help you install the wire mesh machine and training your workers.
2. One year gurantee for whole machine except vulnerable parts.
3. 24 hours technical support by email.
4. Door to door service can be provided.
Q: Does your machine have CE certification?
A: Yes,our machine with CE certification.
Q: How about payment terms?
A: 30% TT deposit + 70% TT before shipment,50% TT deposit + 50% LC balance, Flexible payment can be negotiated.
Q: Do you offer turn-key solutions?
A: Yes, we provide consultancy service and turn-key solutions.
Q: Installation and commissioning?
A: We will send our engineer for installation and commissioning, but relevant cost will be paid by you.
Q: Do you have some videos where we can see the line producing?
A: Yes, we can provide some videos for reference.
Complaint
