90W Poe Injector Lt++ Outdoor Dual Power DC/AC Input

Min.Order: 1

Product origin: Guangzhou, Guangdong, China

Infringement complaint:

Complaint

US$ 116.5 ~ 128

Description

Product Feature
1. Single-port Midspan
PSE90-TO-LT Power over Ethernet (PoE) single- port Midspan offers a cost effective, fully IEEE 802.3af/802.3at compliant solution for outdoor installations, guaranteeing 90 Watts of power and ensuring safe and reliable operation in outdoor environment of any standard PoE data terminal.
2.Wide Temperature
The PSE90-TO-LT work well during the complex environment within temperature -40ºC-85ºC,Output 90W, 1.73A, can meet most high-power PD in the market.
3.Lightning Surge Protection
Provide 8 lines power& signal 6KV(10/700us) lightning-protection for PD escape from lightning strikes. Shell casing, IP67 Waterproof jacket protection on the connector.
4.Waterproof& Easy install
PSE90-TO-LT with shell casing IP66 can installed outdoor for using.Tthere are four mounting holes to fixed to the wall by tied to shelf.
5. Provide Power with AT detection chip
Use of Linaer American company chip, the chip can adapt to the complex working environment requirements
PSE90-TO-LT with AT(Support POE/POE+/POE++) chip will detect if the PD is standard. If yes,then output +55VDC; SO stop work to protect the PD from destroy.

Model		PSE90-TO-LT
port	LAN	1 port 1000M RJ45
	POE	1 port 1000M RJ45
	AC	1 port AC port: three-pin circle plug
CHIP		Linaer PSE CHIP
Environmental		Working Temperature:-40ºC~85ºC Working Humidity :10%~90% RH non-condensing Storage temperature:-45ºC~85ºC Storage Humidity:5%~90% RH non-condensing
Cooling mode		Natural cooling,No fan
Shell material		IP67 Grade,aluminum material
Input Power		DCIN:DC 50V~DC57V MAX 100W AC IN:AC100~265V 60~60Hz MAX 105W
POE		IEEE802.3af/IEEE802.3at Support PoE / PoE+ / LTPoE++ PD Power Pin: 4/5(+), 7/8(-) and 3/6(+),1/2(-) Output Voltage: 55V utput Current: 1.73A
lightning protection		Meet 802.11 Electrical Standard Meet IEC61000-4-5, GBT17626.5 surge test standard Meet IEC61000-4-2, GBT17626.2 surge test standard By 10.700uS and 1.2/50-8/20uS (40ohm resistance) surge test DC IN: 6KV/6KV(common mode / Differential mod) RJ45: 6KV/3KV(common mode / Differential mod) PHY : 1.5KV(common mode / Differential mod)
Standards Protocols		IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support 10/100/1000Base-T LAN Support for IEEE802.3af/at PD MTBF: 100,000 h.@25ºC
Network Media		10Base-T: Pair 2 Category 3(Cat3) and above UTP/STP(≤80m) 100Base-TX: Pair 2 Category 5(Cat5) and above UTP/STP(≤80m) 1000Base-T: Pair 4 Category 5(Cat5e) and above UTP/STP(≤80m) 1000Base-T: Pair 4 Category 6(Cat6e) and above UTP/STP(≤90m)
Product specifications		Waiting to determine