Technical parameter | |||
Drilling depth(M) | 200 | ||
Drilling diameter(mm) | 500 | ||
Speed of turntable(r/min) | 6.7;10;17;43;63;108(reverse) | ||
Torque of turntable(KN.m) | 14.5;9.7;5.7;2.3;1.5;0.9(reverse) | ||
Single rope lifting capacity of mian windlass(KN) | 30 | ||
The capacity of main windlass(KN) | 180 | ||
Single rope lifting capacity of hydraulic windlass(KN) | 30 | ||
The capacity of hydraulic windlass(KN) | 120 | ||
The lifting capacity of hook(KN) | 180 | ||
Bearing capacity of mast (KN) | 180 | ||
The height of mast (mm) | 10200 | ||
Bearing capacity (t) | 25 | ||
Pipe | Kelly bar(mm) | 108×108×6000 | |
Assistant pipe (mm) | 89×10×4500 | ||
BW850/2A plunger pump | Diameter of cylinder (mm) | 150 | |
Stroke of piston (mm) | 180 | ||
Theory of flow (L / min) | 600 850 | ||
Rated pressure (Mpa) | 3 2 | ||
Pounding times (min -1 ) | 58 82 | ||
Diameter of suction tube (mm) | 127 | ||
Diameter of drain pipe (mm) | 64 | ||
Input speed (r / min) | 470 | ||
Input power (kw) | 40 | ||
Overall dimensions (mm) | 2000*1030*1400 | ||
Weight (t) | 1.5 | ||
Truck chassis | Drive form | 6×4 | |
Engine | Model | YC6J180-33 (Europe II emission standard) | |
Rated power(KW) | 132 | ||
Speed (r/min) | 2500 | ||
Size (L*W*H)(mm) | 100320×2400×3200 | ||
Electric generator | Rated power (kw) | 100 | |
Rated voltage(v) | 400 | ||
Speed (r/min) | 1500 | ||
Frequency(Hz) | 50 | ||
The highest speed (Km/h) | 75 | ||
Weight (kg) | 17340 | ||
Transport size(L*W*H)(mm) | 10252*2400*3726 | ||
Working size(L*W*H)(mm) | 10032*3570*11459 |