Complaint
| Alloy: | 1235, 8011 |
| Temper: | O |
| Thickness: | 0.008~0.025mm |
| Width: | 100~1220mm |
| Coil ID: | 75, 150 |
| Alloy | Fe | Si | Cu | Mn | Mg | Cr | Zn | Ni | Ti | Other | Al | |
| Each | Total | |||||||||||
| 1235 | 0.65 | 0.05 | 0.05 | 0.05 | - | 0.1 | - | 0.06 | 0.05 | 0.15 | 99.35 | |
| 8011 | 0.6~1.0 | 0.50~0.9 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | - | 0.08 | 0.05 | 0.15 | Remains |
| Alloy | Temper | Thickness (mm) | Test under room temperature | ||
| Tensile Strength Rm/(N/mm2) | Elongation %(>=) | ||||
| A50mm | A100mm | ||||
| 1235 | O | 0.0080~0.0090 | 50~100 | - | ≥1.0 |
| >0.0090~0.0120 | 50~100 | - | ≥1.5 | ||
| >0.0120~0.0180 | 50~90 | - | ≥1.0 | ||
| >0.0180~0.0250 | 50~90 | - | ≥1.0 | ||
| 8011 | O | 0.0060~0.0090 | 50~100 | ≥0.5 | |
| >0.0090~0.0120 | 60~100 | - | ≥1.5 | ||
| >0.0120~0.0180 | 65~110 | - | ≥1.5 | ||
| >0.0180~0.0250 | 55~105 | - | ≥1.0 | ||
1. Our motto: clients first
2. Great attention will be paid to every inquiry
Reply you within 24 hours
7 days per week, 24 hours per day available
3. Free samples and professional consultation
4. Strict quality control
a. each piece of product goes through at least four inspections before being delivered
b. detailed inspection rules before packing and shipment
c. complaints, although rare, are treated with great responsibility
5. Prompt delivery, perfect after-sale service.
6. Welcome to visit our factory either before or after putting an order!
Q: Are you a factory or export company?
A: We are a professional manufacturer with decades of history and have our own mature export department.
Q: Do you offer samples? Are they free or extra?
A: Yes, we offer free samples, but not for all products. Pls contact us for detailed information.
Q:May I customize products?
A: Of course you can. We will not begin manufacturing until we get full information about your requirement.
Q: What are the trade terms?
A: FOB, CFR, CIF will be accepted.
Q: Why to choose your company?
1. Excellent quality & low price: as a large manufacturer we've got mature raw material supply chain, skillful staff and advanced equipment to guarantee quality and reduce cost.
2. Professional manufacturing process: our workshop is equipped with 1+4 hot tandem rolling line, 4 cold mill production lines, and 5 foil mill production lines, and a complete complex of fishing equipment.We can provide leveling, cutting, slitting, wire drawing, polishing, film sticking, bending, cutting circle, punching hole, making end enclosure, stamping and punching flower, etc. according to customer's requirements.
3. Professional service: most of our export staff have been in the industry for more than 8 years.
4.Our motto: clients first. In case of conflicts we share responsibility with our clients even thought it may not be our fault.
