Description
LAUNCH Creader 3001 CR3001 is Car OBD2 Code Reader Support Full OBDII/EOBD,it can work better than launch Launch creader 4001
Launch Creader 3001 OBDII / EOBD Code Reader Scanner Support Multilanguages Same as Al419As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on. The easiest way to reset the check engine light and clear any codes is to use a scan tool, which plugs into the OBD2 DLC port, usually somewhere on the driver's side. Check your owner's manual for the location. For DIYers, you don't need to invest in a top-of-the-line scan tool for basic diagnostic functions, our Launch Creader 3001 make DIYer and car enthusiatist repair their vehicle's problem by themselves.
Top 5 Reasons to Get Launch Creader 3001:1.Accureate Quick Diagnosis Tool
2.Full Funciton OBD Scanner
3.Wide Compatibility
4.Powerful Scan Tool
5.100% Risk Free Purche
Launch Creader 3001 Functions List:I/M Readiness status test
View freeze frame date
View data stream
O2 Sensor
Evap system test
On-Board monitor test
Read & Clear DTCs
Identify VIN information
DTC code look up
Turn off MIL(Malfunction Indicator Lights)
Creader 3001 supports 10 modes of OBDII diagnostic :Mode $01 Request current powertrain diagnostic data.
Mode $02-Request freeze frame information.
Mode $03-Request emissions-related diagnostic troublecodes.
Mode $04-Clear/reset emissions-related diagnosticinformation.
Mode $05-Request oxygen sensor monitoring test results.
Mode $06-Request on-board monitoring test results for specific monitored systems.
Mode $07 - Request emission-related diagnostic troublecodes detected during current or last completed drivingcycle
Mode $08-Request control of on-board system, test orcomponent.
Mode $09-Request vehicle information.
Mode $0A-Request emissions-related diagnostic troublecodes with permanent status after a clear/reset emission-related diagnostic information service.
Launch Creader 3001 Support Languages:Multi-Language: English , French , Russian , Spanish ,German, Italian ,Portuguese
Launch Creader 3001 Support Vehicle Models:Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Daweoo, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu,Jeep Ford, EU-Ford, GM, Chrysler, Mini, Vauxhall, Dacia, Alfa-Romeo, Lancia, Peugeot, Renault, Citroen, Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Porsche, Seat, Skoda, Audi, Saab, Sprinter,Chrysler.
Launch Creader 3001 Support Protocols:J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898).
They are all obd2 scanner,check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test , Evap system test, On-Board monitor test.
How to Verify Whether the Vehicle Will Pass the Emission Test With 3001 Creader?After entering the I/M Readiness,there will be 10 results on the list. Misfire monitor,fuel system,component monitor,catalyst monitor,heated catalyst,EVAP system,secondary aire sys,O2 sensor,O2 sensor heater EGR and/or WT.There will be an OK if each of them works fine.(Not all vehicles have these 10 parts)
Launch Creader 3001 Detect EVAP System:The evaporative mission control (EVAP) system captures gasoline fumes and other emisions produced when fuel evaporates within the gas tank or fuel system.The EVAP system then returns there vapors to the combustion process to keep harmful chemicals from reaching the air when the vehicle is not running.
Different Between Launch 3001 scanner and Autel AL319? They are all obd2 scanner,check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test , Evap system test, On-Board monitor test.
Launch Creader 3001 Scanner FAQs:Question 1:Does it tell you more than just the code ? Also does it work on 90's cars ?
Answer 1:96 and up vehicles have obd2 so if you vehicle is 96 or up yes if it's a 95 down to 80 something it's obd1 which this tool can read it just doesn't come with the cable to read obd1 so you'll have to order it separately
Question 2:Can Launch Creader 3001 software update?
Answer 2:Hello, this scanner do not need to upgradeable.
Question 3:Can Launch Creader support Benz C230K 2005?
Answer 3:It can not work for 2005 c230K, but launch creader 3001 can work for 2006-2016 benz cars.
Question 4:Will it work for honda accord 2009 lxp
Answer 4:Hello, yes ,it can work for honda accord 2009.
Question 5:Is this compatible with my 2007 toyota avanza in the philippines?
Answer 5:Hello, I am sorry, I can not sure, I do not know if your car is JOBD car or OBD2 car, 3001 can not support jobd car, it support obd2 protocol car..
Launch Creader 3001 Customers Reviews:Review 1:This Scan Tool is a good one, You can read and erase codes easily. I just used on a 2008 Civic and I was able to read code that in this case was a faulty oxygen sensor and after repair I was able to erase code. All good.now.
I like Launch Tools.
Review 2:Simple, cheap, and it works! Gave great live streaming info. Too bad I don't know much of the data or have use for it at this time. But this would be really useful in the future. I mainly bought this to remove an code error. Although keep in mind, it you do not replace/repair the fault itself, the error will come back.
Review 3:I used this to check the A/F and O2 sensors on my truck to determine if the sensors were bad or if I really needed to replace my catalytic converter. The I/M readiness information is useful when you are preparing for a smog inspection.
Review 4:I used it on 2006 BMW 325i and 98 Toyota Sienna. work great on both cars. Reading code is a lot faster than my 5 years old OBD scanner. The display is a little small and a bit hard to read the text, otherwise, it is a good scanner. The oxygen sensor test looks cool but I haven't gotten a chance to try it yet.
Review 5:I was using an OBD2 scanner that linked to my smartphone but unless I wanted to pay much money for an app that gave me more than the elementary functions it did not do enough. This Creader has many features and easy to use. No need for batteries as it runs off your car's voltage. The screen is bright and very easy to read plus it has lots of features that my old one did not have unless you paid for a better app.
Launch Creader 3001 Specifications: Screen: 1.77 " TFT, 160*128dpi
Voltage Range: 9-18V
Operating Temperature : 0ºC -50 ºC (32 ºF -122 ºF )
Environment Temperature: -20 ºC -70 ºC (-4 ºF -158 ºF )
Dimension : 118mm*68mm*22.3mm(4.65" *2.68 " *0.88 " )
Weight: <200g
Launch Creader 3001 Package includes:1pc x Launch Full Obdii/Eobd Code Reader Scanner Creader 3001 Diagnostic Tool