Complaint
| 2009 GYXTC8Y XX B1.3 (G.652D) XXXXm | |
| : Softel | |
| 2009 | : Manufacture year |
| GYXTC8Y | : Cable type |
| B1.3 (G.652D) | : XX cores single-mode optical fiber (ITU-T Rec. G.652D) |
| XXXXm | : Mark of meters |
| *The marking is printed every 1 meter; **"G.652D" means ITU-T Rec. Low Water Peak (LWP) G.652 Single Mode Optical Fiber. | |
| No | 1 | 2 | 3 | 4 | 5 | 6 |
| Color | Blue | Orange | Green | Brown | Slate | White |
| No | 7 | 8 | 9 | 10 | 11 | 12 |
| Color | Red | Black | Yellow | Violet | Pink | Aqua |
| No | 13 | 14 | 15 | 16 | 17 | 18 |
| Color | Blue+R | Orange+R | Green+R | Brown+R | Slate+R | White+R |
| No | 19 | 20 | 21 | 22 | 23 | 24 |
| Color | Red+R | Natural+R | Yellow+R | Violet+R | Pink+R | Aqua+R |
| Fiber number | Tube Diameter | Messenger steel wire diameter | Sheath thickness (nominal*) | Diameter W*H (Nominal*) | Weight (Approx.) |
| mm | mm | mm | mm | kg/km | |
| 2~12 | 3.0 | 1.6mm | 1.0 | 5.0×10.1 | 45 |
| 14~24 | 3.6 | 1.6mm | 1.0 | 5.6×10.7 | 50 |
| Item | Specification |
| Fiber type | Single mode |
| Fiber material | Doped silica |
| Attenuation coefficient @ 1310 nm @ 1383 nm @ 1550 nm @ 1625 nm | £ 0.36 dB/km £ 0.32 dB/km £ 0.22 dB/km £ 0.30 dB/km |
| Point discontinuity | £ 0.05 dB |
| Cable cut-off wavelength | £ 1260 nm |
| Zero-dispersion wavelength | 1300 ~ 1324 nm |
| Zero-dispersion slope | £ 0.093 ps/(nm2.km) |
| Chromatic dispersion @ 1288 ~ 1339 nm @ 1271 ~ 1360 nm @ 1550 nm @ 1625 nm | £3.5 ps/(nm. km) £5.3 ps/(nm. km) £18 ps/(nm. km) £22 ps/(nm. km) |
| PMDQ (Quadrature average*) | £0.2 ps/km1/2 |
| Mode field diameter @ 1310 nm | 9.2±0.4 um |
| Core / Clad concentricity error | £ 0.5 um |
| Cladding diameter | 125.0 ± 0.7 um |
| Cladding non-circularity | £1.0% |
| Primary coating diameter | 245 ± 10 um |
| Proof test level | 100 kpsi (=0.69 Gpa), 1% |
| Temperature dependence 0oC~ +70oC @ 1310 & 1550nm | £ 0.1 dB/km |
| Operating temperature range | -40oC to +60oC |
| Storage / Transport temperature range | -50oC to +70oC |
| Installation temperature range | -20oC to +50oC |
| NO | ITEM | TEST METHOD | ACCEPTANCE REQUIREMENTS |
| 1 | Tensile Strength IEC 794-1-E1 | - Load: 1, 000 N - Length of cable under load: 50m | - Loss change £ 0.1 dB @1550 nm - No fiber break and no sheath damage. |
| 2 | Crush Test IEC 60794-1-E3 | - Load: 300 N/100mm - Load time: ≥1min | - Loss change £ 0.1 dB @1550 nm - No fiber break and no sheath damage. |
| 3 | Impact Test IEC 60794-1-E4 | - Points of impact: 5 - Times of per point: 5 - Impact energy: 1.0Nm - Radius of hammer head: 12.5mm - Impact rate: 2sec/cycle | - Loss change £ 0.1 dB @1550 nm - No fiber break and no sheath damage. |
| 4 | Repeated Bending IEC 60794-1-E6 | - Bending Dia.: 20 x OD - Load: 100 N - Flexing rate: 3sec/cycle - No. of cycle: 30 | - Loss change £ 0.1 dB @1550 nm - No fiber break and no sheath damage. |
| 5 | Torsion IEC 60794-1-E7 | - Length: 1m - Load: 100 N - Twist rate: 1min/cycle - Twist angle: ±180° - No. of cycle: 10 | - Loss change £ 0.1 dB @1550 nm - No fiber break and no sheath damage. |
| 6 | Water Penetration IEC 60794-1-F5B | - Height of water: 1m - Sample length: 3 m - Time: 1 hour | - No water shall have leaked from the opposite end of cable |
| 7 | Temperature Cycling IEC 60794-1-F1 | - Temperature step: +20oC→-40oC→+60oC →+20oC - Time per each step: 12 hrs - Number of cycle: 1 | - Loss change £ 0.1 dB @1550 nm - No fiber break and no sheath damage. |
| 8 | Compound Flow IEC 60794-1-E14 | - Sample length: 30 cm - Temp: 70°C ± 2°C - Time: 24 hours | - No compound flow |
| 9 | Sheath High Voltage Test | - On line test - 9t KV (t-sheath thickness) | - No sheath breakdown |
